Super Handy Cooler Box 45QT Instruction Manual

: June 8, 2024
: Great Circle

Table of Contents

Instruction Manual
- Super Handy Cooler Box 45QT
TECHNICAL DETAILS
PRODUCT INTRODUCTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction Manual

Super Handy Cooler Box 45QT

WARNING:

Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. ions in a safe place and on hand so that they can be read when required. Keep these instructions to assist in future servicing.

TECHNICAL DETAILS

FIG1 TECHNICAL DETAILS

PRODUCT INTRODUCTION

FIG 2 PRODUCT INTRODUCTION

FIG 3 PRODUCT INTRODUCTION

FIG 4 PRODUCT INTRODUCTION

Tips to make your coolers best performance:

Pre-chilling. Treat your cooler as a temperature maintainer. Now that you think about it in this way, you can understand why it is so important to bring the internal temperature of the cooler down before adding ice. This process is referred to as pre-chilling and is essential for the proper operation of your cooler. We recommend placing dry ice in the cooler for at least 1 hour. Aways use proper safety precautions when handling dry ice including the use of
gloves. If dry ice is not available place the cooler in a chest freezer overnight. Another option is to fill up the cooler with ice and leave overnight, then change to fresh ice before using.
If possible, chill or freeze any goods before placing them in the cooler. The ice will last much longer.
Water from melted ice is not a bad thing! Cold water that comes from ice after a few days
helps insulate the remaining ice better than empty airspace.
Open your lid as few times as possible to reduce warm air coming from the outside. Always
shut the lid with latch lock in correct position after you opened the cooler.
Ice performance can vary greatly. Block ice will melt slower than cube ice, but cube ice with
a larger total surface area will cool items faster. You may want to consider a mixture of both
types. Start with very cold, solid ice versus wet ice that has already begun to met. Besides,
the temperature, times you open the lid, will also influence the ice performance too.
Fill cooler with as much ice as possible.
Your cooler is dry ice approved. Dry ice (CO2), made from frozen carbon dioxide, is an
excellent way to achieve super cold temperature, without any water residue. Always handle
dry ice with caution and wear protective gloves, as it can quickly freeze burn skin (-109°F).
Allow for adequate ventilation of any CO2 gas. It may be helpful to add some dry ice to your ice mixture to keep it colder longer.