RANGER RG2ACSK288 Hybrid Bluetooth Speaker User Manual

Hybrid Bluetooth Speaker 288 User’s Manual

Product Description

Ranger Bluetooth Speaker 288 is a hybrid Bluetooth mini speaker with superb quality music output. It allows you to stream music from Bluetooth-enabled mobile phones and laptops wirelessly. It also comes with a 3.5mm universal audio jack interface . The 3.5mm audio jack cable can use with devices that are without Bluetooth function such as MP3, MP4 or CD player.

The Ranger Hybrid Bluetooth Speaker 288 is very portable. It is compact and weight only 81.5g and can be stashed into your bag and brought out conveniently

Product Overview

1. Loudspeaker
2. Charging port
3. Indicator
4. Line in jack
5. Wire / Off / Bluetooth switch

What’s in the box:

• Ranger Hybrid Bluetooth Speaker 288
• 3.5mm audio jack cable
• USB charging cable
• Carry pouch
• User manual

Charging

Ranger Hybrid Bluetooth Speaker 288 use the DC power jack socket and comes with a USB charging cable.

1. Connect one end of the Usb charging cable to the DC port of the speaker and insert the other end ( USB-A ) into the USB port of your PC.
2. Each charge cycle may take 1.5 hours.
3. LED will indicate red while charging and goes off when charging is complete.

Note:

1. Only use the Usb charging cable that comes with the Speaker.
2. When the battery is low, LED will flash red and beep sound will come out every 20 seconds. Please charge it.

Basic Operations

Using 3.5mm audio cable

1. Connect the 3.5mm audio cable from the ( AUX IN ) port of the speaker to your music player.
2. Set / Push the switch to the “wire” position and the LED will shown as blue colour when Line in is working.
3. Adjust the volume using the controls on your music player.
4. After use, please switch off the speaker and disconnect the audio cable.

Using Bluetooth

1. Set / Push the switch to the Bluetooth position – LED will flash blue quickly.
2. Turn on the Bluetooth of your mobile phone or music device, search for Bluetooth device.
3. Select “Ranger 288” in the list of Bluetooth devices, then follow the steps and enter pin code 0000 to pair
4. Once paired and connected, LED will flash blue once every 15 seconds. The Bluetooth speaker will be automatically connected to your mobile phone or music device whenever you turn the Bluetooth speaker on again and the device must be within the operating range.

NOTE:

1. When losing connection, the speaker will automatically switch itself off after 30 minutes, please restart it again when connect.
2. When the battery power is low , LED will not shown up if you switch to Bluetooth side. But it may work fine on the Line in side. Please charge it.
3. Do not play music at excessive levels as may result damage to the equipment
4. Do not use outdoors in the wet or in damp surroundings

Product Specification

• Dimension: 45mm x 45mm × 55mm
• Net weight: 81.5g
• Bluetooth compliance: Bluetooth V2.1
• Operating frequency band: 2.401-2.480 GHz (2.4GHz ISM segment)
• Operation range: Class 2, up to 10 meters
• Support profiles: A2DP, AVRCP
• Speaker: 36mm (4Ω)
• Loudspeaker output: 2.2W
• Frequency response: 20Hz-20kHz
• Signal-to-noise: 95 ± 2db
• Distortion: 1%
• Bluetooth playback time: up to 6 hours
• Line-in playback time: up to 8 hours
• Battery voltage/capacity: 400mAh
• Battery charging voltage: 5V
• Battery charge time: 1.5 hours

Troubleshooting

position. Adjust volume on player

Safety Information

• To avoid damage or malfunction of this device, do not drop it from high places.
• Keep this device away form humidity, water and other liquids. If the device is exposed to water, moisture or other liquids, do not operate it to avoid the potential of electric shock, explosion or damage to the device / injury to yourself.
• Do not place or keep this device near any heat source, such as direct sunlight, radiators, stoves or other apparatus which produces heat. It may cause an explosion or degrade the performance and/or life of the battery.
• Do not attempt to modify, repair or disassemble this device yourself (Especially the battery: It may cause an explosion). Attempting any repair or modification of this device by yourself will void the warranty.
• Do not place heavy objects on this device.
• Use only the correct Usb charging cable as supplied with this device.
• Replacement or service must be done by a qualified service center or by the manufacturer.
  Unplug this device when unused for long periods, or during lightning storms.

CAUTION: ELECTRIC SHOCK HAZARD

The battery in this device may present a risk of fire or chemical burning if mistreated.

Declaration of Conformity

EU

This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   • This device may not cause harmful interference.
   • This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Warning Statement

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction. Changes or modifications not expressly approved by the party responsible for compliance. This could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Trademark Statement

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
All brand and product names are trademarks of their respective owners.

RANGER RG2ACSK288 Hybrid Bluetooth Speaker User Manual – Download [optimized]
RANGER RG2ACSK288 Hybrid Bluetooth Speaker User Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>