RANGER DESIGN 16-U0500 Rear Roller Installation Guide
- October 30, 2023
- RANGER DESIGN
Table of Contents
RANGER DESIGN 16-U0500 Rear Roller
Product Information
The product consists of various components that are required to assemble a roller and frame for a ladder. The product includes thefollowing items:
- 1x 16-050 Rear Roller
- 2x 16-052 Brace Roller Frame
- 2x 16-053 Bracket, Crossbar
- 2x 16-054 Foot bracket Roller
- 1x 16-055 Roller bearing Bushing
- 2x 16-056 Rubber pads
- 2x 16-057 Flat Washer 3/8 O.D. 7/8 SS18-8
- 2x 16-058 Flat Washer 5/16 O.D. 3/4 SS18-8
- 1x Ratchet
- 1x Tape Measure
- 1x Ladder
- 1x 1/2 Socket
- 1x 1/2 Wrench
- 1x 3/8 Socket
- 1x Knife
In addition to the components, the product also includes a Bill of Materials that lists all the items along with their quantity and description.
Product Usage Instructions
- Assemble the roller using item no. 16-050 and two item no. 16-052. This is step 1 of the assembly process.
- Attach the roller frame using item no. 16-055, item no. 16-050, two item no. 90-016, two item no. 98-115, two item no. 16-056, two item no. 16-057, and two item no. 94-109. This is step 2 of the assembly process.
- Attach the foot brackets using item no. 16-054, two item no. 16-056, and four item no. 98-117. First, attach the rubber pad to the foot bracket. Place the feet on the structural section of theroof. This is step 3 of the assembly process.
- Install the rear roller using crossbar brackets and item no. 16-U0500. Use two item no. 90-205, four item no. 98-117, and two item no. 94-111 for this step. This is step 4 of the assemblyprocess.
Note: It is recommended that step 3 be completed once the crossbars are installed on the van.
PARTS
Bill of Materials
| Item No. | Description | Qty. |
|---|---|---|
| 16-050 | Brace | 1 |
| 16-052 | Roller Frame | 2 |
| 16-053 | Bracket, Crossbar | 2 |
| 16-054 | Foot bracket | 2 |
| 16-055 | Roller | 1 |
| 16-056 | Roller bearing | 2 |
| 16-057 | Bushing | 2 |
| 16-058 | Rubber pads | 2 |
94-3027
| Item No. | Description | Qty. |
|---|---|---|
| 90-016 | Bolt Hex 3/8-16×2 SS304 | 2 |
| 90-205 | Bolt hx-hd 5/16”-18×3/4” SS304 | 10 |
| 94-109 | Lock nut hx-hd nyl-insrt 3/8” SS304wax | 2 |
| 94-111 | Lock nut hx-hd nyl-insrt 5/16” SS316wax | 10 |
| 98-115 | Flat washer 3/8” O.D. 7/8” SS18-8 | 4 |
| 98-117 | Flat washer 5/16” O.D. 3/4” SS18-8 | 20 |
INSTALLATION
ASSEMBLE ROLLER
ATTACH ROLLER FRAME
It is recommended that the following steps be completed once the crossbars are installed on the van.
ATTACH FOOT BRACKETS
FOOT BRACKET CONFIGURATION
REAR ROLLER INSTALLATION
INSTALL REAR ROLLER USING CROSSBAR BRACKETS
Documents / Resources
|
RANGER DESIGN 16-U0500 Rear
Roller
[pdf] Installation Guide
16-U0500 Rear Roller, 16-U0500, Rear Roller, Roller
---|---