WHITESTONE Dome Glass Tempered Glass Screen Protector User Guide
- June 3, 2024
- WHITESTONE
Table of Contents
Dome Glass Tempered Glass Screen Protector
User Guide
Dome Glass Tempered Glass Screen Protector
- Please check all manual and attachment videos before using the product.
- Products damaged or damaged by user negligence cannot be exchanged or refunded.
Premium Film Installation Guide
** Please make sure to check manual and installation video before using
the product.
Products damaged or damaged by user usage, cannot be exchanged or refunded.
< Quick guide / User guide>**
Please check the model and components before using the product.
- Match your device model with the product in advance.
- Please check all the components listed on the page3 and if there is any problem with the components, please contact us before the installation.
Cautions before Dome glass installation
- Surface scratch restoration is limited to minor scratches.
- It can be immediately restored, when writing with a stylus pen gently.
- If pressing too hard, the glass could be restored in a few days, but may remain small stains.
- No exchanges or refunds for customer’s fault.
**Components
**
Reference
- There may be differences in components depending on the model.
- To improve the product, component’s appearance or specifications e can be change without prior notice.
- Some components can be purchased separately if necessary.
*There are differences in components depending on the model, so please check the components of the product purchased before attaching it.
**** Installation-Display
STEP1
Remove pre-installed film. Use the alcohol wipe and the cleaning cloth to wipe
down the scrRemove any dust on your screen with the dust remover stickAttach
the stopper. lose the device to the stopper.
STEP2
Remove liner film(back). Align the film starting with the top edges of the
screen.
STEP3
Tilt the protective film (1)180° and push with a squeegee to attach it. Tilt
the protective film (2)180° and push with a squeegee to attach it.
STEP4
Press the line with a squeegee. Attach the area where air bubbles are formed
by carefully pushing it once more with a squeegee. With a dust removal sticker
remove the front rotective film. * Please do not press the bubbles or lines
after the installation, it will be naturally disappeared.
Installation-Body
STEP1
Use the alcohol wipe and the cleaning cloth to wipe down the device. Remove
any dust on your device with the dust remover sticker. Attach the
stopper.Close the device to he stopper.
STEP2
Remove liner film(back).
Align the film starting with the top edges of the device.
STEP3
Tilt the protective film (1)180° and push with a squeegee to attach it.
Tilt the protective film (2)180° and push with a squeegee to attach it.
STEP4
Remove any bubbles with a squeeze.
With a dust removal sticker remove the front protective film. * Please do not
press the bubbles or lines after the installation, it will be naturally
disappeared.
Installation-Body
STEP1
Use the alcohol wipe and the cleaning cloth to wipe down the device.
Remove any dust on your device with the dust remover sticker.
STEP2
Remove protective film.
Align the film starting with the top edges of the screen.
STEP3
Tilt the protective film (1)180° and push with a squeegee to attach it. Tilt
the protective film (2)180° and push with a squeegee to attach it.
STEP4
Remove any bubbles with a squeeze. With a dust removal sticker remove the
front protective film.
- Please do not press the bubbles or lines after the installation, it will be naturally disappeared.
****Installation-Hinge & Camera
STEP4
Use the alcohol wipe and the cleaning cloth to wipe down the device Remove
liner film[1].Place it on the device and attach it in position. Tilt the
protective film (2)180° and ush with a squeegee to attach it. Tilt the
protective film (3)180° and push with a squeegee to attach it. With a dust
removal sticker remove the front protective film. Use the lcohol wipe and
the cleaning cloth to wipe down the camera. Remove liner film .Place it on the
device and attach it in position.
Please check the installation Guide.
Precautions after installation
- Bubbles or lifting may occur by physical impacts such as drop impact, incompatible phone cases use, excessive strength while cleaning with alcohol wipes or etc.
- No refund or exchange for any type of user damages.
※Global A/S※
CONTACT US:
feedback@whitestonedome.com
HOMEPAGE
www.whitestonedome.com
> WARRANTY REQUEST
We always provide friendly and fast service to your questions.
WHITESTONE Ltd.
27, Baekseokgongdan7-ro, SeoBuk-gu, Cheonan-si,Chungcheongnam-do, Republic of
Korea
The unique Component Manufacturer, Whitestone
www.whitestonedome.com for Mobile Device.
Copyright ⓒ Whitestone Ltd. All rights reserved.