WHITESTONE Galaxy Z Fold 3 5G Smartphone User Guide
- June 5, 2024
- WHITESTONE
Table of Contents
Galaxy Z Fold 3 5G Smartphone
User Guide
Please make sure to check the manual and installation video before using the
product.
Products damaged or damaged by user usage, cannot be exchanged or refunded.
http://m.site.naver.com/0lpjS
After checking the Quick guide, check the User guide.
Please check the model and components before using the product.
- Match your device model with the product in advance.
- Please check all the components listed on page3 and if there is any problem with the components, please contact us before the installation.
Cautions before Dome silk installation
- Watch the Installation video and manual carefully before starting to install.
- Please see all introductions, since each device has a different installation way.
- Install the film after removing any film on the screen.
- Please avoid a dusty place.
- Be careful of any impacts while getting out the jig from the box in order to prevent any damage.
- Be careful not to force the jig apart or break it.
- If there is a problem with the subsidiary materials, please do not attempt installation and contact customer service immediately.
Components
Reference
- There may be differences in components depending on the model.
- To improve the product, the component’s appearance or specifications, etc. can be changed without prior notice.
Installation
STEP1
Remove the protection film attached to your device using the
Remover.
STEP2
Attach the anti-slip pad vertically to the back of the jig.
Connect the Align block to the top part of the JIG.
STEP3
Insert the device into the JIG incorrect direction.
STEP4
Clean the display with an alcohol wipe and cleaning cloth.
Then, remove any dust with a dust removal sticker.
STEP5
Hold the top part of the film as shown, and bend the [1 sticker] as shown in
[Figure 1].
Like [Figure 2] Make sure that the protective film and pet film are properly
separated and slowly remove the protective film. If it is as shown in [Figure
3], attach the protective film as if it is in the first state and remove it
carefully so that only the protective film can be removed.
Please do not touch the adhesion surface.
STEP6
Flip the film with the protective film removed so that the top/bottom text is
visible to the front.
- Insert the top part of the film into the Align block.
- Insert the bottom part of the film into the bottom part of the JIG.
- Please do not touch the adhesion surface
- Make sure the Film does not stick to the device
Dome Premium Genuine Film Installation User Guide
STEP7
Hold the top end of the film and slowly and forcefully push up with the
squeegee from the bottom of the jig to the top while maintaining the squeegee
at a lean angle. Push the squeegee all the way to the end.
- A bubble might appear if you push the squeegee too fast.
Dome Premium Genuine Film Installation User Guide
Installation
STEP8
Remove the guide film from Jig’s hole while pressing the ①-top/②-bottom of the
film with a squeegee. ③Push the film entirely to the short side of the
squeeze.
Dome Premium Genuine Film Installation User Guide
Installation
STEP9
Bend the guide film attached to the film and remove it from the top. Finish by
pressing the film edge with the short part of the squeegee. Remove the device
from the JIG.
- Microbubbles will disappear within a week.
Dome Premium Genuine Film Installation User Guide
Please check the Installation Guide.
Precautions after installation
- Bubbles or lifting may occur by physical impacts such as drop impact, incompatible phone cases use, excessive strength while cleaning with alcohol wipes or etc.
- No refund or exchange for any type of user damage.
※Global A/S※
CONTACT US
feedback@whitestonedome.com
HOMEPAGE
www.whitestonedome.com
WARRANTY REQUEST
We always provide friendly and fast service to your questions.
WHITESTONE Ltd.
27, Baekseokgongdan7-ro, SeoBuk-gu, Cheonan-si,
Chungcheongnam-do, Republic of Korea
The unique Component Manufacturer, Whitestone
(www.whitestonedome.com) for Mobile Device.
Copyright ⓒ 2021 Whitestone Ltd. All rights reserved.