MEAN WELL NTS-2200 series High Reliable True Sine Wave DC AC Power Inverter User Guide

: June 8, 2024
: MEAN WELL

Table of Contents

MEAN WELL NTS-2200 series High Reliable True Sine Wave DC AC Power
Product Usage Instructions
Frequently Asked Questions
Features
Applications
Description
Model Encoding
SPECIFICATION
AC Output Socket
DERATING CURVE
LED STATUS
MECHANICAL SPECIFICATION
Accessory List
TYPICAL APPLICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEAN WELL NTS-2200 series High Reliable True Sine Wave DC AC Power

Inverter

Specifications

Model No.| Rated Power (Continuous)| Over Rated Power (3 Min.)| Peak Power (10 Sec.)| Surge Power (30 Cycles)| AC Voltage Output| Frequency| Waveform
---|---|---|---|---|---|---|---
NTS-2200-112 / NTS-2200-124| 2200W| 2530W| 3300W| 4400W| True sine wave| AC Regulation
NTS-2200-148| 2200W| 2530W| 3300W| 4400W| True sine wave| AC Regulation
NTS-2200-212 / NTS-2200-224| 2200W| 2530W| 3300W| 4400W| True sine wave| AC Regulation
NTS-2200-248| 2200W| 2530W| 3300W| 4400W| True sine wave| AC Regulation

Product Usage Instructions

Installation

Follow the installation guidelines provided in the user manual to properly set up the power inverter.

Connection to Power Source

Connect the DC input source to the power inverter according to the specified input requirements for your model.

Operating the Inverter

Switch on the power inverter using the designated power button. Monitor the output on the AC side to ensure proper functioning.

Safety Precautions

Always follow safety precautions while operating the power inverter to prevent any accidents or damage to the device.

Frequently Asked Questions

Q: Can I use the power inverter with a car battery?

A: Yes, you can use the power inverter with a car battery as long as the input voltage matches the specifications of the inverter.

Q: What should I do if the inverter overheats?

A: If the inverter overheats, immediately switch it off and allow it to cool down before attempting to use it again.

Q: Is the power inverter suitable for outdoor use?

A: The power inverter can be used outdoors, but ensure it is protected from moisture and extreme weather conditions.

2200W High Reliable True Sine Wave DC-AC Power Inverter

Features

True sine wave output (THD <3%)
High surge power up to 4400W
Temperature controlled cooling fan
AC output voltage and frequency selectable by DIP S.W
No load disspation <1.7W at standby saving mode
-25°C~+70°C wide operating temperature
Power ON-OFF remote control
Front panel indicator for operation status
Protections :
- Input : Reverse polarity / DC. low alarm / DC low shutdown / Over voltage
- Output : Short circuit / Overload / Over temp.
Battery over discharge protection (low voltage disconnect)
Suitable for lead-acid or li-ion batteries
Remote controller (IRC1, IRC2, IRC3 accessory sold separately, please refer to: https://www.meanwell.com/webapp/product/search.aspx?prod=IRC1 )
Support RS-232 communication(Communication cable order No.: RJ11-RS232, sold sperately)
Carry handle accessory available(Order NO.: Carry handle, sold separately)
Conformal coating
3 years warranty

Applications

Home and office appliance
Power tools
Portable equipment
Vehicle
Yacht
Off-grid solar power system

GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

NTS-2200 is a 2200W highly reliable off-grid true sine wave DC-AC power inverter. Its key features include: digital design with MCU control, streamlined control circuitry that quickly responds to environmental changes and improves reliability, high quality fan with low acoustic noise, 4400W peak power, adjustable AC output voltage and frequency, -25~+70°C wide operating temperature range, complete protection features, and etc. Combined with batteries, the NTS-2200 is suitable for use in residential, commercial, marine, automobile, mine, construction site, and remote areas with no access to utility power, and the output can be used to power fans, TV, radio, phone charger, PC/laptop, lighting, induction stove, air conditioner, electromechanical tool, communication equipment, power distribution cabinet, outdoor camping equipment, marine AC power, factory equipment, and etc.

Model Encoding

SPECIFICATION

MODEL NO.

| NTS-2200-112| NTS-2200-124| NTS-2200-148| NTS-2200-212| NTS-2200-224| NTS-2200-248
---|---|---|---|---|---|---
= US, UN, TB| = EU, CN, AU, UK, UN, TB

AC OUTPUT

DC INPUT

| DC VOLTAGE| 12Vdc| 24Vdc| 48Vdc| 12Vdc| 24Vdc| 48Vdc
VOLTAGE RANGE (Typ.)| 10 ~ 16.5Vdc| 20 ~ 33Vdc| 40 ~ 66Vdc| 10 ~ 16.5Vdc| 20 ~ 33Vdc| 40 ~ 66Vdc
DC CURRENT (Typ.)| 250A| 120A| 60A| 250A| 120A| 60A
NO LOAD DISSIPATION (SAVING MODE)(Typ.) Note.2| Default disable, auto detect AC output load≦10W will be changed to saving mode
1.7W
OFF MODE CURRENT DRAW| ≦2mA
EFFICIENCY (Typ.) Note.1| 89%| 90%| 91%| 90%| 92%| 93%
BATTERY TYPES| Lead Acid or li-ion
PROTECTION| DC INPUT| FUSE (INTERNAL)| 40A8| 40A4| 25A4| 40A8| 40A4| 25A4

LOW

| ALARM| 11±0.3Vdc| 22±0.5Vdc| 44±1Vdc| 11±0.3Vdc| 22±0.5Vdc| 44±1Vdc
SHUTDOWN| 10±0.3Vdc| 20±0.5Vdc| 40±1Vdc| 10±0.3Vdc| 20±0.5Vdc| 40±1Vdc
RESTART| 12.5±0.3Vdc| 25±0.5Vdc| 50±1Vdc| 12.5±0.3Vdc| 25±0.5Vdc| 50±1Vdc

HIGH

| ALARM| 15.5±0.3Vdc| 31±0.5Vdc| 62±1Vdc| 15.5±0.3Vdc| 31±0.5Vdc| 62±1Vdc
SHUTDOWN| 16.5±0.3Vdc| 33±0.5Vdc| 66±1Vdc| 16.5±0.3Vdc| 33±0.5Vdc| 66±1Vdc
RESTART| 15±0.3Vdc| 30±0.5Vdc| 60±1Vdc| 15±0.3Vdc| 30±0.5Vdc| 60±1Vdc
BAT. POLARITY| By internal fuse open
AC OUTPUT| OVER TEMPERATURE| Protection type : Shut down o/p voltage, re-power on to recover
OUTPUT SHORT| Protection type : Shut down o/p voltage, re-power on to recover
OVER LOAD (Typ.)| 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
Protection type : Shut down o/p voltage, re-power on to recover
CIRCUIT BREAKER| 25A (Only for “TB” type)| None
TB TYPE| UL458 (Only for “TB” type AC socket)| None

FUNCTION

| REMOTE CONTROL| CONNECTOR| Power ON-OFF remote control by front panel dry contact connector(by RELAY), Open : Normal work ; Short : Remote off
ACCESSORY| Remote controller sold separately, Order No.: IRC1,IRC2,IRC3
RS-232 COMMUNICATION| RS-232 ~ RJ11 Type connector (Please refer to page 4 for more details)

ENVIRONMENT

| WORKING TEMP.| -25 ~ +70℃(Refer to “Derating curve”)
WORKING HUMIDITY| 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -30 ~ +70℃ / -22 ~ +158oF, 10 ~ 95% RH non- condensing
VIBRATION| 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY

& EMC

(Note.5)

| SAFETY STANDARDS| CB IEC62368-1,Dekra Seal BS EN/EN62368-1,UL458, UL62368-1, E13,EAC TP TC 004,AS/NZS 62368.1 approved

(Please refer to next page“AC output socket” table for more details)

WITHSTAND VOLTAGE| DC I/P – AC O/P:3.0KVAC AC O/P – FG:1.5KVAC

EMC EMISSION

EMC IMMUNITY

OTHERS

| MTBF| 364.7K hrs min. Telcordia TR/SR-332 (Bellcore) ; 34.9K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 42027098mm (LWH)
PACKING| 8.6Kg; 1pcs/ 10.4Kg/ 1.39CUFT

NOTE

|

Efficiency, AC regulation and THD are tested by 1650W load, linear load at 12.5Vdc/25Vdc/50Vdc input voltage.
No load dispation at non-saving mode(Typ.): 112/124/148 for 25W, 212/224/248 for 55W.
All parameters not specified above are measured at rated load, 25 C of ambient temperature and set to factory setting.
Internal pre-start circuit, the setup time is 8s.
The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on https://www.meanwell.com//Upload/PDF/EMI
_statement_en.pdf)

Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

AC Output Socket

DERATING CURVE

IRC1/2/3 Remote Controller (Accessory sold seperately)

IRC1/IRC2/IRC3 is the monitoring and control unit.
IRC1/IRC2/IRC3 can decode the RS-232 signals sent by the inverter series and display through digital meters.
Note: Part of the control signals will not function properly due to different compliance of each model.
Please refer to for more detail: https://www.meanwell.com/webapp/product/search.aspx?prod=IRC1

Support RS-232 Communication
The internal data of single NTS-2200 can read through RS-232.

Please refer to for more detail: http://www.meanwell.com/manual.html
RJ11-RS232 Communication cable should be ordered seperately, Order No.: RJ11-RS232

Remote ON-OFF Control (Built-in)

Remote ON-OFF	AC Output Status
Open	power inverter ON
Short	power inverter OFF

AC Output Voltage. Frequency, Power saving mode selectable by DIP SW
Output voltage and frequency setting factory settings are either 110Vac/60Hz or 230Vac/50Hz, users are able to adjust the voltage and frequency, through the DIP switch of position 1,2,3,4 on the panel.