CREALITY HALOT R6 Resin 3D Printer User Manual

CREALITY HALOT R6 Resin 3D Printer

Product Information

• Specifications:
  • Model: AVd
  • Power: 110-240V AC
  • Frequency: 50-60Hz
  • Dimensions: 10 x 5 x 3 inches
  • Weight: 2 lbs

Product Usage Instructions

• Power Connection:
  • Ensure the product is connected to a power source within the voltage range of 110-240V AC.
• Setup:
  • Place the product on a stable surface with dimensions of at least 10 x 5 inches.
• Operation:
  • Follow the specific instructions related to the function of the AVd model as outlined in the user manual.
• Maintenance:
  • Regularly clean the product using a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
• Storage:
  • Store the product in a dry and cool place when not in use to prevent damage.

FAQs

• Q: What should I do if the product does not power on?
  • A: Check the power connection and ensure it is within the specified voltage range. If the issue persists, contact customer support.
• Q: How often should I clean the product?
  • A: It is recommended to clean the product regularly, at least once a month, to maintain optimal performance.

Dear Consumers,

• Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer.
• Our teams are always ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer.
• For a better experience in using our product, you can also access how to use the printer in the following ways:
• View the accompanied instructions and videos on the U disk.
• Visit our official website www.creality.com to find relevant software/hardware information, contact details and operation and maintenance instructions.

Firmware/Software Downloads and Upgrades
The Printer already supports the following slicing software, and further functions are on the development roadmap.

• Download the firmware and HALOT BOX slicing software at: https://www.creality.com.
• Download the CHITUBOX slicing software at: https://www.chitubox.com.

NOTE

1. Do not use the printer in any way other than described to avoid personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
4. Please use the recommended resin in case of damage to the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
6. Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
7. Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printer’s moving parts leading to burns, possible bodily injury, or printer damage.
8. Please wait after the print is finished. please wear gloves to take out the print tools.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
10. Children under 10 years should not use the printer without supervision.
11. Tips Do not plug or unplug the power cord when powered on.
12. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators’ legal liability under any.

Product Appearance

Packing list

TOOL LIST

Information about the interface

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware Ul published on the official website.

DEVICE CHECK

Note: Check that the light source is working properly. The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware Ul published on the official website.

LEVELLING GUIDE

1. Raise the platform, loosen the rubber screws on the left and right sides of the resin vat, and take out the resin vat.
2. Loose the four screws on the connecting plate on moulding platform plate, attach the calibration card on the printing screen, and press Settings →Print Settings→ Z axis movement Leveling, Check whether the platform fits evenly with the paper by referring to the steps on Page 6.
3. After confirming that the calibration card fit evenly, lock the four screws of the platform.
   • Note: The platform has been leveled at the factory. If it needs leveling due to transportation or other reasons, please follow the steps below to adjust the printing platform.
   • The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware Ul published on the official website.

Release Film (FEP) Replacement

Tips:

1. The direre film fee wil for the cut them o procedure, please refer to the physical product; if there are excess edges after installation
2. It is recommended to replace the release film when it has been used for more than 200 hours.

Resin in

• Pour the UV photosensitive resin into the resin vat. The slot capacity is 200ml/410ml.

Caution:

• Resin may cause skin irritation or an allergic skin reaction. Please wear gloves before use to avoid direct contact with the skin.
• Do not exceed the maximum capacity scale of the tray when pouring in filaments to prevent them from overflowing during the printing process.

Tips: How to change resin? Take out the resin vat slowly, pour out the remaining resin into the container, clean the resin vat, pour in new resin,and then install the resin vat to the machine.

USB Disk Printing

1. Slicer
2. Open the HALOT BOX software, click the icon O in the upper right corner to add the printer;
3. Click the icon 1 in the upper left corner to open the model file;
4. If a support needs to be added to the model, click the icon 1 above and set the corresponding parameters 2. Then click “Slice” 3 to start slicing;
5. After the slicing is completed, the printing parameters can be set according to the model requirements;
6. Print
7. Click Save 1 to save the generated cd|pv4 type file to the U disk;
8. Insert the USB disk

  *  **Warning** During the printing process the machine can’t be shaken, so as not to avoid affecting the printing quality.
  * The current interface is for reference only.
  * Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware Ul published on the official website.![CREALITY-HALOT-R6-Resin-3D-Printer-FIG-1 \(16\)](https://manuals.plus/wp-content/uploads/2024/06/CREALITY-HALOT-R6-Resin-3D-Printer-FIG-1-16.png)

Creality Cloud Online

Make sure WiFi is correctly connected before using online printing

• Steps: Settings → WiFi → Select the corresponding WiFi.
• Warm Tips: 1 Only 2.4GHz WiFi applies to the 3D printer, and it cannot be connected to 5GHz WiFi routers; 2 Only WPA-PSK/WPA2-PSK security protocol applies to the 3D printer, and other protocols may result in the failure to connect the printer to WiFi properly. To change the security protocol, users may change it in settings interface of the router.

Creality Cloud App Print

Notes:

1. The steps for adding devices vary for different mobile phone operating systems;
2. Set the correct area in “Settings – Other Settings – Language and Area”.
3. Make sure WiFi is correctly connected before using online printing.
   • The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware Ul published on the official website.

WIFI Print

• Before wireless printing, make sure the HALOT BOX is connected to the same local area network as the printer.
• Enter password before transtering the file, Be consistent with the password set on the printer. (Click “Print Settings → HALOT BOX → Password”)

1. SLICER

   ---

   • The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/- firmware Ul published on the official website.
   1. Open the HALOT BOX software, click the icon 1 in the upper right corner to add the printer;
   2. Click the icon 1 in the upper left corner to open the model file;
   3. If a support needs to be added to the model, click the icon 1 above and set the corresponding parameters 2. Then click “Slice” 3 to start slicing;
   4. After the slicing is completed, the printing parameters can be set according to the model requirements;
   5. Click to print , enter the password and then click to start transmission.
   6. Once the transmission is over, select the file on the machine to start printing®.

Post-processing Guide

1. Remove the printed model with a blade;
2. Remove the support from the surface of the model;
3. Clean the model;
4. Cure the model;

Please dismantle the model concerning this process and consult the official customer service if you have any questions.

Equipment parameters

Troubleshooting

Circuit board wiring diagram

FCC

FCC WARNING
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. Due to the differences between different machine models, the actual objects and the images can differ. Please refer to the actual machine. The final explanation rights shall be reserved by Shenzhen Creality 3D Technology Co., Ltd.

CONTACT

• SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
• 18th Floor, JinXiuHongDu Building, Meilong Road, Xinniu Community,
• Minzhi Street, Longhua District, Shenzhen City, China.
• Official Website: www.creality.com
• Tel : +86 755-8523 4565
• E-mail: cs@creality.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>