CONCORD HDMI 4 Way Switcher User Manual
- June 7, 2024
- CONCORD
Table of Contents
CONCORD HDMI 4 Way Switcher
Introduction
The product can switch any of these 4 HDMI 2.0 sources to an HDMI 2.0 display. It supports 10bits HDR (High Dynamic Range) pass through and resolution up to 4K2K@50/60Hz 4:4:4. An optical output is supported. The product is built-in WiFi function, so it supports voice control through connecting an amazon voice product and APP control. Furthermore, the product can also be controlled by on-panel button and n IR remote control.
Features
-
HDMI 2.0, HDCP 2.2 compliant
-
Support 18Gbps bandwidth
-
Resolution up to 4K2K@50/60Hz YCbCr 4:4:4
-
10bits HDR pass through supported
-
Support an optical output Support connecting an amazon voice control
(Please check “6. Echo Connection and Operation” detail description) -
Support “Smart switch” APP control
(Please check “6.2 To set Switcher and use APP control”) -
IR remote and on-panel button control
-
4 HDMI inputs and 1 HDMI output
-
Compact design for easy and flexible installation
Package Contents
- 1× 18Gbps HDMI 4×1 Switcher
- 1× 5V/1A DC Power Adapter
- 1× IR Remote
- 1× User Manual
Specifications
Technical
HDMI Compliance| HDMI 2.0
HDCP Compliance| HDCP 2.2 / HDCP 1.4
Video Bandwidth| 594MHz/18Gbps
Video Resolution| 480i ~1080p50/60Hz, 4Kx2K@24/30Hz, 4k2k@60Hz
Color Depth| 8/10/12-bit [1080P, 4K30Hz, 4K60Hz (YCbCr 4:2:0)] 8-bit [4K60Hz
4:4:4]
Color Space| RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0
HDMI Audio Formats| LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,
DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
Optical Audio Formats| PCM2.0, Dolby Digital / Plus, DD+, DTS
ESD Protection| Human body model—±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connections
Input Ports| 4×HDMI Type A (19-pin female) 1×IR Receive Window
Output Ports| 1×HDMI Type A (19-pin female) 1×OPTICAL audio out (S/PDIF)
Mechanical
Housing| Plastic Enclosure
Silkscreen Color| Black
Dimensions| 122mm (W) × 64mm (D) × 19mm (H)
Weight| 230g
Power Supply| Input: AC100 – 240V 50/60Hz, Output: DC 5V/1A
Power Consumption| 1.45W
Operation Temperature| -10°C ~ 50°C / 14°F ~ 122°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
Front Panel
Number
| Name|
Function description
---|---|---
1| POWER LED| The LED will illuminate in red when the device is connected to
power supply.
2| IN 1/2/3/4 LED| The LED will illuminate in green when HDMI OUT port is
selected an input source.
3| LINK| Network connection LED. The LED will illuminate when the device
connects network signal.
4| IR IN| IR receiver window. It receives the IR remote control from this
product only.
5| INPUT button| Pressing this button will select IN1/IN2/IN3/IN4 input source
to OUTPUT port.
Rear Panel
Number| Name|
Function description
---|---|---
1| RESET button| Network connection and firmware upgrade button.
- The product will enter network setting status when the button is pressed up to 3s.
- The product will enter firmware upgrade status when the button is pressed less 0.2s.
(The FOTA to upgrade.)
2| DC 5V| Plug the DC 5V/1A power supply into the unit and connect the adapter
to an AC outlet.
3| INPUT 1/2/3/4| Connect to HDMI source devices such as DVD player or set-top
box with an HDMI cable.
Side Panel
Number| Name|
Function description
---|---|---
1| HDMI OUTPUT| Connect to one HDMI display device such as TV or Monitor with
an HDMI cable.
2| OPTICAL port| Connect to audio output device such as amplifier with an
optical wire.
Echo connection and operation
To set Voice Box and to connect Amazon Account
There are two ways to enter amazon Alexa login page.
a. You can input the “https://alexa.amazon.com” web site to your
PC/laptop/ mobile Internet Explorer and click “Search” to enter amazon Alexa
page.
b. You can download and install the app “amazon Alexa”. Open this app
“amazon Alexa” to enter amazon Alexa page.
The login page of the amazon Alexa is shown as below:
You need to fill in some information to create an account. You can enter the
login page when the account creates successfully. The page is show as below:
Sign in the account successfully, you will enter the following page. You need
to setup a new device on the “Settings” page.
At this time, according to your speaker box to select one product. Our company
uses the product about “Echo Dot”, and clicking the “Echo Dot” icon will setup
the product at the following steps.
At this step, you need to power on your Echo Dot. When the blue horse race
lamp is off, you need to press the ‘round dot’ button (the button on the
right) until it appears yellow horse race lamp. Click the ‘Continue’ button.
The page is show as below:
At this step, go to your Wi-Fi setting on this computer and select the network
of the format ‘Amazon-XXX’ to connect it. After connecting to ‘Amazon XXX’,
you can continue setup. These page are show as below:
At this step, you need to select one available Wi-Fi network on this computer
and connect it.
At this step, the Echo Dot is connected to the Internet. Click the ‘Continue’
button. The page is show as below:
You can connect an external speaker to your Echo Dot. Our company does not an
external speaker to connect the Echo Dot, so I will select ‘Use built-in Echo
speaker’. The page is show as below:
At this step, all settings about the Echo Dot has been finished.
To set Switcher and use APP control
Please download a “Smart switcher” APP on your iOS device.
Click this APP icon, if you registered before, click “SIGN IN” to login, but
if you have not register, please click “Registered”. Then you will see the
following register page.
Note: You need to input a real e-mail address if you want to change the password. In addition, the e-mail need to be used when connected the voice box
Step 1: Fill in these information and click “Create my account”. Then to
enter login page.
Step 2: Please enter the email and password before you have registered,
and then click the “Sign in” to login.
Step 3: Click the “+” sign
Step 4: Press and hold the “RESET” button for 3 seconds, then click the “Next” button.
Step 5: Input has recognized the Wifi password and then click the “Next”
button.
Step 6: When you see this page, the Wifi has connected success, click
“OK” button and then click “Set” button to enter the following page. At this
time, the LINK LED is always light.
Step 7: Input the name of device and connecting source, click Submit.
Then select Home to return for main page.
① Green means connected success.
② Gray means unconnected success, refresh this page and wait for a moment. If
it still is unsuccess, please connect it again from Step 3.
③ Black means the product can be controlled by voice box.
④ Gray means the product can not be controlled by voice box.
If the product is connected success, click it to enter control page.
Push the corresponding button to control your device.
To activate Skills and connect product
At the Amazon Alexa page, You need to select “Skills” option and input “smart switcher” and click “search” button to enter the next step.
I have registered the Email address and Password at the front and fill in it
at
this page.
At this step, the smart switcher has been successfully linked. You can use the Echo Dot product to switch the switcher input source.
Echo voice command list
Function | Voice command |
---|---|
Wake up product | open smart switcher |
switch to input channel |
- open smart switcher for input {input number}
- switch to next input
- switch to previous input
- You can set custom input source name and speak the custom input source name to switch input channel. For example: switch to ‘apple tv’. (Please check “6.2 To set Switcher product” description.)
Automatic switch features
-
The product has power off memory function. After power off, and these
input signal sources have not been pulled out. The output device will display the input source of the last power down when the product is powered on again. -
The product is powering on. The output device will display the next input channel signal when you pull out current input signal source. The priority order is 1->2->3->4->1…etc.
-
The product is power off. If you pull down current input signal source.
The output device will display the next input channel signal when the product is powered on again. The priority order is 1->2->3->4->1…etc.
IR Remote
IN1/IN2/IN3/IN4: Select IN1/IN2/IN3/IN4 input source to output display.
: Loop select input source to output display.
FAQ
1. Q: Does this product require an HDMI line length for the connection
interface?
A: According to HDMI line length test, HDMI input / output with 4K2K@24Hz
8bit or 4K2K@60Hz YCbCr 4:4:4 is the longest line length up to 16.4ft / 5m.
The use of “Premium High Speed HDMI” cable is highly recommended.
Application Example
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>