CONCORD QV5600 8 Channel 4K NVR Package – 4x5MP Cameras User Guide
- June 5, 2024
- CONCORD
Table of Contents
CONCORD QV5600 8 Channel 4K NVR Package – 4x5MP Cameras
What’s in the box?
Congratulations on your new Concord Professional Surveillance System. Inside the box, you will find everything you need to connect your NVR and cameras to your TV or monitor.
Getting to know your NVR
❶ | Power Input | Connect 48V power supply. |
---|---|---|
❷ | Power Switch | Master power, turn on after power connection. |
❸ | __ |
Audio Output
| Optional connection to an amplifier or active speakers, using an RCA
connection.
❹| VGA Monitor Port| To connect monitors that use a VGA connection.
❺| HDMI Monitor Port| To connect monitors that use an HDMI connection.
❻| Reset Button| Manual reset button for the unit.
❼| __
USB Ports
| USB ports for mouse or thumb
drive to share videos.
❽| WAN Port| Connect to your network router
using supplied short RJ45 Ethernet cable.
9| __
LAN Camera Inputs
| Connect cameras using the supplied long RJ45 cables.
Note:
This guide assumes a minimal standard installation using only the out-of-box
cables and mounting aids. You will need to consider your specific installation
needs, such as the distance between the NVR and cameras or nternet router. You
may need additional cables and/or equipment for your specific situation
which are available at your reseller.
How to connect your NVR
Easy 5 Step guide
We strongly recommend you connect all cameras and cables and check they are communicating and can be seen on your monitor before permanent installation.
STEP 1:
Connect your cameras: Connect one end of A to a camera and the other to a LAN
Camera input. If the cameras are to be used outside use the weatherproof
covers to house the camera connection.
STEP 2:
Connect a display Connect a monitor or HDTV to own a VGA cable. using the
supplied HDMI cable or, if your monitor uses a VGA cable, to using your own
VGA cable.
STEP 3:
Connect USB mouse Connect the supplied USB mouse to either USB port
STEP 4:
Powering up your device Connect the power supply unit to the power input and
switch on with power switch
Easy 5 Step guide
STEP 5:
Create a Password When you first power up your NVR the password window below
will appear. The password needs to be a minimum of five and containing a
mixture of numbers and letters. Ensure to use a password that you are familiar
with but is not easily known to others.
ATTENTION
Be sure to record your login credentials and keep in a secure location. If you
forget your password you will need to reset the NVR password using your email.
Please ensure to set up your email from the NVR Remote viewing and email
manual or download the Full Product Manual on the Concord website
concordconnect.com.au.
Write your password down here and store it in a safe place.
Setup Wizard
Configuring your device using the Wizard The Start-up Wizard automatically
runs the first time you power up the NVR, however, it is not necessary to run
the wizard to get started. The wizard will guide you through customizing the
network, date and time setup, as well as IP camera, storage and screen
resolution configuration. You will also find the QR code to setup the mobile
app. All these settings can be changed in the Setup menu later. If you are
happy to stick with the default settings you can cancel the Setup Wizard by
clicking at the top right of the pop up. Configuring Date and Time Manually If
you cancel the wizard, you will need to set up the date and time manually by
opening the menu (bottom left corner), click Setup System General Date & Time,
change to suit your time zone.
In this menu you can setup the date and time manually
Setup Complete
ALL BASIC CONFIGURATIONS ARE NOW COMPLETE
Your HDTV or monitor should have vision from all connected cameras
.
Advanced Setup
Please visit our website www. concord. support and download the full product manual, it can be found on the download tab of the product page for your model. The manual will show you how to do the following:
- Connect your NVR to the internet
- Camera channel configuration
- Recording configuration
- System configuration
- Access your NVR via the Concord Security App
- And many other features to help you get the most out of your CCTV system
Please refer to the Mobile/APP Quick start guide for setting up email alerts access to your NVR via the CONCORD App.
Additional cameras, cables and accessories are available from your Concord reseller. For Concord Surveillance Support and Product Registration visit: www.concordconnect.com.au/supportwww.concordconnect.com.au/register
References
- CCTV & AV Systems – Technology to Enhance Your Lifestyle | Concord
- CCTV & AV Systems – Technology to Enhance Your Lifestyle | Concord
- Register Your Concord Products | Concord
- Contact CCTV or AV Tech Support | Concord