Shenzhen Shengye Technology GW55 Smartwatch User Guide

: June 13, 2024
: Shenzhen Shengye Technology

Table of Contents

Operating Guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Operating Guide

Scan the QR code above to download and install the APP client
(Suitable for use)

Getting Started

Long press the on button for 3 seconds to turn on/off.
Understand the basic structure of the product as shown in the figure below.
Waterproof test hole
Loudspeaker
Heart rate sensor
Charging contactor
On/Off button
Microphone
Crown

Charging

Watch charging: Place the charging stand near the center of the bottom of the watch (as shown in the figure below),
When the watch’s battery level is close to zero, it is expected to take 3 hours to fully charge.
When charging wirelessly, it is normal for the watch to generate heat (not exceeding 45°C).
Charging stand

Waterproof

1. The waterproof level of this watch is IP67, you can wear it normally in life scenarios such as washing hands, rain, and car washing.
2, IPXX is the International Electrotechnical Association (IEC) developed dust and waterproof rating standard (IEC60529), if necessary, please do not take the watch soaked in water; If the watch is soaked for a short time, do not operate the button (if the watch screen is broken or damaged, do not soak in water).
3, in seawater, hot water, hot springs, sauna (steam room), diving, diving and other scenes, please do not use the watch.

Basic Operation

If there is no operation for 3 seconds in the power on state, the watch will automatically shut down and enter a sleep state (which can be modified in “Set up – Screen off time”, that is, the backlight off time can be modified), but you can press any button to wake up the watch.
The watch has multiple HOME dials built-in, and when in the dial interface, turning the crown can switch between HOME dials. You can also select your favorite dial in the APP “Equipment-Device-Dial Settings” and download it to the watch.
When in the dial interface, press the Crown button to enter the watch function menu. At this time, if you quickly double-click the Crown button you can switch between different menu styles.
Slide the screen down at the top of the dial interface to access the shortcut menu, and then slide the screen up at the bottom to exit it.
Slide the screen up on the dial interface to open the information bar, and then slide the screen down again to exit the information bar.
Slide the screen to the right on the dial interface to pop up the sidebar, and then slide the screen to the left to exit the sidebar.
On the dial interface, slide the screen to the right to pop up the sidebar and exit to the left.
On the dial interface, slide the screen to the left to access the functional components. Multiple page functional components can be switched between left and right slides (last page “+” click to add or delete).
Double click on the dial interface to quickly open the Voice Assistant (Siri); When in the dial interface, double-click the Crown button to quickly open the Sports mode.
On the dial interface, cover the entire screen with your palm, and the screen will quickly tuin off.
In most operating interfaces (non dial interfaces), sliding the display screen to the right can return to the previous menu or dial interface.

Button Functions

Watch Crown
Short press to wake up the screen during screen rest;
Double click to open the sport made (when dial interface);
Short press to enter the function menu (when dial interface), then press again to return;
Double click to switch menu styles (when function menu interface);
Rotate the crown to switch the dial, zoom icons, flip pages, etc;
In the general operation interface, short press to return.
On/Off Button
Long press to turn on/off the watch;
Short press to wake up the screen/rest the screen.

On the dial interlace, sliding the screen from top to bottom can bring up a shortcut menu, and sliding the screen can be done in the shortcut menu area (i.e. the upper, lower, and middle areas of the display screen). Slide the screen up from the bottom of the display screen to exit the shortcut menu.

Auto display
Flashlight
Settings
Brightness
Find Phone
APP QR code
BT Audio
Not Disturb
Binding-State
Battery
About
Power saving
Screen lock
Bedside lamp
Turn off
Volume
Alarm clock
Slide up in this area to exit the shortcut menu.

Reminder:
The factory default BT audio is turned on by default. If it is not paired with the smartphone bluetooth for 2 minutes, the watch BT audio will automatically turn off. BT audio is divided into “call audio” and “media audio”. Please enable it according to actual needs.

Pairing Smartphone

1. This watch can be paired with a smartphone through the app. Smartphones supported by the app: ISO10.0 or above, Android 5.0 or above, and Bluetooth version 5.0 of above.

2. APP installation: Scan the following QR code to download and install (note: During the installation or use of the APP, please follow the prompts to activate all permissions, otherwise it may affect the normal use of the APP).

Reminder: This watch is equipped with duel Bluetooth: firstly, communication Bluetooth (BLE), which is used for normal connection and functional applications with apps; The second is BT Audio, which connects a watch to a mobile phone as an audio peripheral (similar to a Bluetooth speaker). Please be careful to turn off your phone’s Bluetooth, otherwise it may affect the normal operation of both types of Bluetooth.

3. APP Binding (BLE): Open the phone Bluetooth and approach the watch. On the “APP-Equipment” page, click “Bind Device”, and the APP searches for the watch model to bind and connect.

APP Bound APP unbound
Whether the binding was successful can be checked in the shortcut menu to see the binding status.

Reminder: You can also click “Unbind Device” at the top of the “APP- Equipment” to unbind the watch; Alternatively, turn off your smartphone’s Bluetooth to disconnect them. However, once the watch is disconnected from the APP, the data of the watch and the smartphone APP, including weather, notification messages, and sports Health data, will not be synchronized, and some functions will be useless.

4. Under normal circumstance, after the APP is successfully bound (BLE), the smartphone APP will automatically remind you if you need to bind BT Audio. If you do not follow the prompts, you can also manually bind BT audio, Open the BT Audio in the shortcut menu of the watch, and then open your smartphone Bluetooth to search for the watch model for BT Audio Pairing connection.

Reminder: Only with BT Audio connection status can the watch answer/end phone calls or make cells, as well as play phone music. BT Audio is divided into “Call audio” and “Media audio”. Please enable it according to actual needs.

Major Instructions

Watch Calling
In “APP-Device-Add Contacts”, “Add” contacts from the phone address book to the watch local (click “Select” and “OK” to synchronize contacts to the watch need to be in the phone Settings – Bluetooth – connected device name – open sync contacts option). You can then make calls directly from your watch. You can make calls by dialing, contact, or call history.

Turn on the “Voice Assistant” function in the sidebar, and you can also make a call with the general voice assistant (such as “Please call ***”).

Play music
After the BT audio connection between the phone and the watch is successful, open the watch music player in the function menu. The watch can control the phone’s music player, switch between up and down tracks, play or pause, and control the volume.

When this watch is bound to an Apple phone, the music Playback function only supports third-party music players; When binding an Android watch, the music Playback function prioritizes activating the phone’s built-in music player, followed by a third-party player.

Reminder: When the battery level is below 15%, the BT audio may automatically turn off, and you will not be able to make calls or listen to music. Please charge it in a timely manner.

Sports mode
Watches offer dozens of sports modes, divided into outdoor and indoor sports. When starting a certain sport, it takes at least 1 minute to obtain valid data. On the sports interface, slide the right screen to enter the control interface (as shown in the figure below), and the left screen can quickly enter the music interface. At this time, you can listen to music while exercising.

“Locking” means to lock the touch screen to avoid accidental touch; When ‘Remind’ is turned on, it will remind you every 10 minutes and remind you that you have persisted for 10 minutes. When exercising, please wear a tight watch to avoid sliding it on your wrist, as this may affect the accuracy of heart rate and physical signs detection.

Compass (Dial)
If your watch version is equipped with a geomagnetic sensor, you can switch to a compass interface for application when needed. Please click the icon in the upper left corner of the compass interface to enter and complete calibration each time you use it. Please keep the watch as far away from magnetic places or objects as possible, otherwise it may affect the accuracy of the compass; If the watch is left unused for a long time, it is recommended to wear it for at least 15 minutes before opening the compass(complete calibration and use).

NFC application
If your watch version is equipped with NFC, the watch can be used for access control (attendance, elevator, Parking), card swiping, quick commands, etc. The relevant functions require your phone to support NFC and related functional applications.

Other Functions And FAQ

Basic functions
Monitoring the daily activities and various sports modes of the watch wearer, message notifications and push notifications, and a variety of watch dials with various styles are the basic functions of a smart watch.

Functions

|

Introduction or explanation of operation

---|---

Sports data

| Open “Sports data” in the function menu to view your daily comprehensive activity volume (steps, calories, mileage).

Message remind

| Reminders for incoming calls, text messages, WeChat, QQ, and other information. Push the relevant information to the watch display (slide up on the dial interface to open the information bar for viewing). Please activate the relevant information in the APP “Equipment-Message notification” section.

Watch dial

| In the dial interface, rotating the crown can switch between different styles of dials. Some dials have shortcut function icons that can be clicked to quickly access. Choking on the fireworks dial can have the effect of exploding fireworks.

More dial

| Select your preferred dial from the APP “Equipment – Dial Settings – Recommend” and install it into the watch.

DIY dial

| Edit and design in the APP “Equipment – Dial Settings – Custom” to create your own DIY dial.

Sports mode

| The watch offers multiple sports modes and can view real-time movement and sign data on the watch. (the APP “Sport” is an independent application on APP and has no direct relationship with smartwatch).

Function menu

| Press Crown button (when dial interface) to enter the watch function if you quickly double-click the Crown button, you can switch between different menu styles.

Shortcut menu

| Dropdown shortcut menu, sidebar, left slide shortcut function component (secondary green).

Health monitoring
This watch and app provide comprehensive and systematic health and safety features for the wearer, but this watch is not a professional medical device. The relevant testing data is for daily reference only and is not used for medical diagnosis purposes.

Functions	Introduction or explanation of operation

Heart rate

| Wearing a watch over the wrist bone and arm, with the watch tightly attached to the wrist, can detect the wearer’s heart rate, with a normal value of 60-100BPM. Swipe left on the detection interface to view the latest measurement records.

Blood pressure

| Measure blood pressure using the same normal wearing method as the heart rate. Adult diastolic blood pressure is 60-80mmHg, and systolic blood pressure is 100-120mmHg. The detection interface slides to the left to view the latest measurement records.

Blood oxygen

| Same as the normal wearing method for heart rate, measure blood oxygen value. The normal value is generally 95% -100%. The detection interface slides to the left to view the latest measurement records.

Sleep monitoring

| This watch supports sleep monitoring and must be worn to fall asleep. The watch will automatically detect the duration of your deep/light sleep, starting from 22:00 at night. After 3-4 hours of sleep, the sleep data will start to be synchronized to the app and can be viewed the next morning.

Exercise intensity

| If you are in a certain sport, you can turn on “Exercise Intensity” monitoring, which can monitor the intensity of your current exercise.

Sedentary

| Open and set it in the “Health Reminder” menu of the watch function, and the watch will automatically remind you.

White noise

| Choosing white noise such as a stove, summer rain, and waves to aid sleep and listening to the sounds of nature can help you fall asleep as soon as possible.

Breathing training

| Breathing training can effectively relax mental states and relieve stress. Follow the screen prompts to perform corresponding exhalation and inhalation movements.

Automatic measuring

| After turning on “Automatic Heart Rate Measurement” in the “APP Equipment”, the watch will automatically start heart rate detection based on the set time period and repetition period.

Auxiliary functions
Auxiliary functions or small tools allow you to better use this watch. There are more applications and operations for watches and apps that you urgently need to experience and apply.

Functions

|

Introduction or explanation of operation

---|---

Auto display

| After turning on “Raise your hand to turn off the screen” in the pull-down menu or function menu, when raising hands and facing the face, the dial will automatically wake up and the screen can be stopped by hanging hands.

Weather

| Connect to the app to synchronize local weather information and display it on the watch.

Stopwatch

| Wrist stopwatch function.

Alarm clock

| Open “Alarm Clock” in the shortcut menu or function menu of the watch and set it, and the watch will automatically remind you.

Remote photography

| When the watch is bound to the phone, open “Take pictures” in “APP- Equipment’. At this time, the watch will display a shutter icon, and clicking on the screen can control the phone to take photos. You can take remote photos or selfies in this way.

Fine smartwatch

| Click to open “APP – Equipment – Find Device”. When the watch and phone are in a BLE connection with effective distance and in a bound state, the watch will emit a ringing feedback. Press any button on the watch to stop searching.

Fine smartphone

| Click on the “Find Phone” icon in the Dropdown shortcut menu of the watch, and within a valid distance, the bound phone will emit a ringing feedback.

Screen lock

| To protect information security, you can turn on the screen lock password function in the watch settings.

Games

| The watch is equipped with two casual games: fighter jet battle and fighter jet obstacle avoidance, which can be easily played during leisure time.

Power saving

| If the watch battery is low or you want to extend standby, turn on the power saving mode in the watch settings. At this time, the screen brightness decreases and the prompt tone turns off.

Calendar

| View dates on the go

Not Disturb

| Turn on ‘Do Not Disturb Mode’ in the watch settings, and all reminder functions on the watch will stop.

Calculator

| Wrist calculator.

Flashlight

| If necessary, turn it on and use the bright screen light as a certain lighting effect.

Running light

| When running at night, turning it on can effectively increase external attention.

Not disturb

| Turn on ‘Do Not Disturb Mode’ in the watch settings, and all reminder functions on the watch will stop.

OTA upgrade

| Click on “APP-Equipment-Firmware Upgrade” to view the latest firmware version of the watch. If there is a new version, it can be upgraded.

APP upgrade

| View the new version upgrade of the APP in ‘APP-Mine-Check for Updates’.

Restore

| In the watch settings or “APP – Equipment – Reset”, you can clear all data in the watch and restore it to the factory status.

Frequently Asked Questions (FAQ)

Q1: When wearing a watch, does the Bluetooth on the phone need to be constantly turned on and connected to the watch?****

(1) Step counting, sleep monitoring, heart rate, blood pressure, blood oxygen detection, alarm clock, sedentary reminder, hand up and screen up, exercise mode, etc. do not require an APP Bluetooth connection. However, relevant detection and motion data can only be synchronized to the APP for viewing, recording, and statistical analysis when connected to the APP.
(2) Call reminder, SMS reminder, third-party application information reminder, mobile watch search, remote photo taking, and other functions require APP binding (i.e. BLE connection) to be used.
(3) Watches that answer/end phone calls or make calls, as well as play phone music, require a successful connection between the watch and the phone’s audio Bluetooth (BT Audio) before they can be used.

Q2: What should I do if my phone and watch automatically disconnect?****

(1) When the phone and watch exceed the Bluetooth connection distance, the Bluetooth connection will be disconnected, and when they return to the connection distance again, the Bluetooth will automatically connect. The effective distance for Bluetooth connection is about 10 meters.
(2) If the Android phone uninstalls the watch app (or clears the app in the background), the Bluetooth connection will be disconnected. Please agree to the permission requested by the system to open the app during the installation process, or trust all permissions of this app to be opened in the phone settings.

Q3: Why is WeChat reminder set, but the watch does not remind?****

WeChat (or other) message reminders need to meet the following conditions:
(1) Please make sure there is a message in the mobile notification bar first. If you have not received a message in the mobile notification, please go to the mobile system settings to activate WeChat (or other) notifications;
(2) According to the reminder mechanism, if the user is using WeChat (or other) applications on their phone and in the chat interface, the watch will not remind them.
(3) Please agree to the relevant notification permissions of this app in the mobile notification permissions.

Q4: What about delayed or lost message push?****

Message delay or message loss may be due to the following reasons:
(1) When receiving the message, the APP is synchronizing and will push the message to the watch after the synchronization is completed, which may cause delays.
(2) The message center retains approximately 15 messages, looping through early historical messages, so the watch can only display and retrieve the most recent messages.

Q5: How to extend the battery life of a watch?****

The battery life of a watch is closely related to its frequency of use, and the standby time can be extended as follows:
(1) Close applications that do not require reminders in the app.
(2) The Bluetooth connection between the watch and mobile phone is frequently disconnected or reconnected, which consumes more power. If you do not need the cooperation of the phone, you can disconnect the Bluetooth connection between the phone and the watch. It is also recommended not to frequently separate the watch from the phone beyond the Bluetooth effective distance (about 10 meters).
(3) The power consumption of the watch display screen is relatively high during operation, so try to reduce the time for bright screen operation as much as possible.

For more common questions, please refer to “APP -Mine- Using help”.

IMPORTANT STATEMENT

This watch and app provide comprehensive and systematic health and safety features for the wearer, but this watch is not a professional medical device.
The relevant testing data is for daily reference only and is not used for medical diagnosis purposes.
Due to different versions of the product having different functions and appearance (such as watch straps) configurations, the pictures in this operation manual are for reference only. Please refer to the actual item you have selected for purchase.
Due to the continuous upgrading of the product and APP functions, this operation manual is for reference only and is subject to the actual functions of the watch and APP.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.