CONCORD QC3910 WiFi Battery Powered Camera User Guide

June 4, 2024
CONCORD

CONCORD QC3910 WiFi Battery Powered Camera

What’s in the box?

Wi-Fi Battery Powered Camera

| Magnetic Mount
---|---
USB Charging Cable|

Wall Mounting Hardware

Getting to know your Camera

|

| Lens
---|---|---

| Microphone

| Infrared LED

| PIR

| Light Sensor
|

| Micro SD Card Slot (Up to 128GB)
---|---|---

| Reset Button

| On/Off Button

| Power Input

Connecting To Wi-Fi

Place your smart phone and camera right next to your wireless modem/router for connection.

Note: Make sure your smart phone is connected to the same network as your wireless modem/router. Please note the camera only works on 2.4G Wi-Fi as SG Wi-Fi is not supported.

Download the App & Account Setup

Download the “Tuya Smart” app on your smartphone from the App store or the Google
Play store. Alternatively you can scan the QR code below and the app icon will be displayed after it has installed correctly.

Tuya Smart

|

QR-CodeTuya Smart

---|---
|

Setting Up Your Camera

Step 1: Insert a microSD card (Not Included) in to the rear side of the camera.
Please note: Class 10 Micro SD cards are recommended. Maximum capacity supported is 128GB.

Step 2: Connect the USB Charging cable to the camera’s power input socket.
Step 3: Connect the opposite end of the USB charging cable to a USB mains power adaptor or computer with at least 2 amps of charging.
Please note: It is suggested to fully charge the camera up to 3 hours on first time use.

Step 4: Press and hold the reset button for up to 5 seconds, then release the button to reset the camera. The LED light will blink quickly.

Step 5: Launch the “Tuya Smart” app from your smart phone and click the “Sign Up” button to begin registering an account or the login button.

Step 6: Once logged in to your account, press the”+” button in the top right corner. Press the “Add Device” button and follow the on screen prompts to add your device automatically. To manually add your device, select “Security & Video Surveillance” and then “Smart Camera (Wi-Fi).
Step 7: Continue to follow the app’s prompts and input your Wi-Fi password. Scan the QR code on the camera (point the camera towards the OR code on your smartphone at at distance of 15-20cm). A beeping sound will from the camera once it has been successfully paired.

Step 8: Once the blue LED stays on, the camera is ready to use.

Installing Your Camera

You can place your camera on a shelf or other flat surface, or you can mount it to a wall.

To mount your camera to the wall:

  • Fasten the mounting screws into the wall, and then attach the magnetic
    mount to the screws.

  • If you’re mounting the camera to drywall, be sure to install the plastic drywall anchors that are provided.

Camera LED Status

LED Status Camera Status
Red LED On System starting up
Red LED Flashes Quickly Standby for configuration
Blue LED Flashes Quickly Network pairing
Blue LED On Camera Online
Purple LED Flashes Quickly OTA Upgrade

www.concordconnect.com.au

Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere NSW 2116 Australia
Ph: 1300 762 627           Fax: 1300 738 500        Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals