CONCORD 4-Way HDMI Switcher User Manual
- June 7, 2024
- CONCORD
Table of Contents
CONCORD 4-Way HDMI Switcher User Manual
Box Contents:
1 x 4-Way HDMI Switcher
1 x Infrared Remote Control
1 x Mains Power Adaptor
Product Diagram:
Connection Diagram:
Operation:
1. Connect the DC plug of the mains power adaptor to the power socket of the switcher. Plug in the mains power adaptor to a 240VAC wall socket and turn it on.
2. Connect a HDMI cable (not included) from your device such as Pay TV, DVD players or media players to the HDMI input of the switcher.
3. Connect HDMI cables (not included) from the four HDMI outputs of the switcher to four HDMI inputs.
Troubleshooting
Safety:
- Do not open or repair the device without professional assistance to avoid electrical shock.
- Do not expose this unit to water, moisture or any liquid.
- Position the unit in a well ventilated area to prevent the unit from overheating.
- Only use the supplied SVDC, 1A power adaptor. If you use any third party power supplies, ensure the voltage is the same to prevent the unit from damage.
Features:
• 1 x HDMI 4×1 Switcher unit
• 1 x 5V/1A Mains Power Adaptor
• 1 x Remote Control unit
• 1 x User Manual
Specifications:
Distributed by:
Techbrands by Electus Distribution Pty. Ltd
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’I: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>