delta Smartphone Holder X Pro Instruction Manual
- June 7, 2024
- Delta
Table of Contents
delta Smartphone Holder X Pro
Assembly instructions
HL6800 A
Parts
Assembly video
Visit designbydelta.com/downloadshttps://qrstud.io/rp12gxc
1 Remove stem cap and insert phone holder, Using spacer rings as needed.
Reinstall stem cap and tighten stem bolt securely.
IMPORTANT NOTE
Never loosen the stem clamp bolts.
GARMIN® OR WAHOO® MOUNTING OPTIONS
1 Use Allen key (2.5mm) to remove mount screw.
(FIGURE 1)
2 Choose Garmin® or Wahoo® mount, position on to the arm. Tighten mount screw with Allen key (2.5mm).
WARNING
Using phone devices while riding can cause accidents resulting in serious
injury.
Important: Nuts and bolts can loosen over time, resulting in serious danger
should the item fall off while in motion. Check frequently to ensure all bolts
are properly tightened. Ensure the device fits snugly in the holder before
riding. Not for off-road use.
Delta Cycle Corporation
36 York Avenue, Randolph, MA 02368 USA
800-474-6615 /
www.designbydelta.comhttps://qrstud.io/h6xadas
Service: Please do not return to store;
for an immediate response email
service@designbydelta.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>