EcoDim Eco-Dim.07 Zigbee Instruction Manual
- June 7, 2024
- EcoDim
Table of Contents
Settings Manual (Eco-Dim.07 Zigbee)
Factory Reset
Please Note: All
configurations will be reset after the device is reset or remove from the
network.
Include to a Zigbee Network
Step 1. Remove the device from previous Zigbee network if it has already
been added to, otherwise pairing mode will be fail.
**Remove
**
Method 1. From your Zigbee hub interface, choose to delete or reset the
device as instructed.
Method 2. Remove from the Device, see below instructions.
**TouchLink
**
Note:
a. When both devices (Dimmer and remote) not included in the Zigbee Network,
each dimmer can link with one remote max.
b. When both devices are included in the same Zigbee network, each dimmer
can link with max 30 remotes.
c. For Philips Flue Hubs and Amazon Echo Plus, add remote and device to
network first then touchlink.
**Find and Bind
**
Step 4. Set the
remote into find and bind mode and enable it to find and bind commissioning
Please refer to the manufacturer’s instruction of how.
**Creating a zigbee network & allow other devices to be added into the
network**
Step 5. Pair more
devices and remotes into the network if you like, please also refer to the
manufacturer’s manuals how.
Step 6. Bind the added devices and remotes through Touchlink
commissioning and the devices in the network can be controlled by the remotes.
Note:
1.Each added device can link and be controlled by max 30 added remotes.
2.Please refer to remote instructions of how many devices can be linked.
Index- Zigbee Clusters the device supports
1) Input Cluster
– Ox0000: Basic
– 0x0003: Identify
– 0x0004: Groups
– 0x0005: Scenes
– 0x0006: On/off
– 0x0008: Level Control
– Ox0b05: Diagnostics
2) Output Cluster
– 0x0019: OTA
EcoDim
Dr. Huber Noodtstraat 89
7001DV Doetinchem
Info@ecodim.nl
+31 (0)314 844691
https://www.ecodim.nl/eco-dim07-zigbee-z-wave-smart-led-dimmer.html
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>