EcoDim Zigbee dimmer in to the AduroSmart network Instructions
- June 6, 2024
- EcoDim
Table of Contents
How to include the ECO-DIM.10 Zigbee dimmer in to the AduroSmart network
-
Make sure the AduroSmart HUB is installed in the right way.
-
Make sure that the EcoDim led dimmer is installed as mentioned in the manual of the dimmer (manual can be found inside the box)
-
Switch on the dimmer by pressing the knob. (Lights must be on)
-
In case the AduroSmart app is not installed, please download and install it via the Google Play Store or the Apple App Store.
-
Complete the steps to create an AduroSmart account. If there is an existing account you can skip to step 6.
-
Start the AduroSmart app and click on the “settings” button below.
-
Select: “Devices”.
-
Select: “Add device”
-
Scroll down and select: “Others”.****
-
Click on the “Search” button, the AduroSmart HUB will start searching for new devices. Make sure the pairing mode on the ECO-DIM.10 led dimmer is active. This can be activated by pushing the reset button on the dimmer twice.****
In case the app cannot find the device, push and hold the reset button on the ECO-DIM.10 led dimmer for 10 seconds. The led indicator will stay in the red. Then repeat the steps as mentioned above. -
The ECO-DIM.10 Zigbee led dimmer will be found as a dimmable light. When the device is found you can save it by selecting the “Done” button in the right top corner.
-
When selecting “Dimmable light 1” you can adjust the name of the device in the app.****
-
The device is added, you can now add the device into a room.****
Documents / Resources
|
EcoDim Zigbee dimmer in to the AduroSmart
network
[pdf] Instructions
Zigbee dimmer in to the AduroSmart network
---|---