RunCam V 5 Orange User Manual
- June 7, 2024
- RunCam
Table of Contents
RunCam V 5 Orange User Manual
Instruction Diagram
- Shutter Button
- Camera Status Light (LED)
- Reset Button
- SD Card Slot
- SD Card Locking Door
- Micro USB Port
Charging
Micro USB port supports DC 5-15V power supply. A DC 5V 1~2A charger is
recommended. The Red LED will turn on during charging and turn off when
charging is complete. It takes about 2 hours to get fully charged.
Low Battery Warnings
When powered on, if the charge is less than 25%, the Blue LED will continue to
flash for 3 seconds.
**Basic Camera Operation
**
Powering On/Of|
- Long press the Shutter button with Green LED on, the camera is under standby mode.
---|---
Mode Switch|
- Double-click the Shutter button to cycle through the recording mode (Green LED), setting mode (Blue LED)
Recording On/Of|
- In the recording mode, click the Shutter button to start recording, the green light flashes; click the Shutter button again, the recording stops, the green light stops flashing.
Parameter Settings|
- Set in the RunCam App
Forced Shutdown|
- Simultaneously press the Shutter button and Reset button.
Formatting|
- In standby mode. Triple-click the Reset button, with a long beep and Green LED blinks three times.
Reset|
- In standby mode. Long press the Reset button, with three beeps and Blue LED blinks three times.
MicroSD Card
Insert the microSD card as indicated by the icon next to the card slot. Use
brand name memory cards (sold separately) that meet these requirements:
- MicroSD, microSDHC, or microSDXC
- U3 recommended (2.7K50/2.7K60 1080P120 requires U3 or above; other resolutions require U1 or above)
- Capacity up to 128GB
000
NOTICE: Use carefully when handling memory cards. Avoid liquids, dust, and debris. As a precaution, power off the camera before inserting or removing the card. Check manufacturer guidelines regarding use in acceptable temperature ranges.
Abnormal SD Card Status : If the blue light continues to flash quickly after powering on, it indicates that the SD card is not inserted, or full or cannot be recognized.
Connection to Computer
After turning on the camera, connect it to the computer via USB cable, then it
will be recognized as a removable disc.
NOTICE: If the camera can not be recognized by the computer after
connecting, please make sure that a microSD card is well inserted. If the
information on microSD card can not be read normally, please try with another
micro USB cable or USB port on the computer.
Firmware Upgrade
To ensure that the camera performs optimally, please use the latest firmware. Update method here: https://runcam.com/download/runcam5or
**Video Bitrate and Codec
**
| Resolution | Video Quality | Codec |
|---|---|---|
| High | Medium | Low |
| 4K@30fps | 60Mbps | 50Mbps |
| 2.7K@60fps | 60Mbps | 50Mbps |
| 2.7K@50fps | 60Mbps | 50Mbps |
| 1440P@60fps | 40Mbps | 30Mbps |
| 1080P@120fps | 60Mbps | 50Mbps |
| 1080P@60fps | 45Mbps | 30Mbps |
**Parameter
**
| Image Sensor | SONY IMX 377 (12MP) |
|---|---|
| Video Resolution | 4K@30fps/2.7K@60fps/2.7K@50fps/ |
1080P@120fps/1080P@60fps/1440P@60fps
Field of View (FOV)| 145°
Video File Format| MP4
TV-OUT| Support
Communication Interface| Micro USB
microSD Card supported| Up to 128G. U3 recommended (2.7K50/2.7K60 1080P120
requires U3 or above; other solutions require U1 or above) Please make sure
that the file format of the SD card is FAT32, otherwise, it will easily cause
errors.
WiFi| Nonsupport
Shutter| Auto| 1/30| 1/60| 1/120| 1/240
ISO| Auto/100/200/400/800/1600/3200
USB Power Input| DC 5-15V
Battery Capacity| 900mAh
Power Consumption| Max 620mA @5V
Dimension| 383836mm
Net Weight| 56g (with battery)
**Technical Support
**
Please visit: https://support.runcam.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>