RunCam 6928352 Thumb 1080P 60FPS Ultra Light FPV Action HD Camera Instruction Manual

RunCam 6928352 Thumb 1080P 60FPS Ultra Light FPV Action HD Camera

Function indication

1. Lens cover
2. Standard installation direction
3. Button (power/shutter button)
4. Indicator light(Red/Green)
5. MicroUSB
6. 1.25mm 2P

Micro SD Card

Support up to 128G, high-speed cards (above Class10) are recommended

Camera connection operation

Step 1: Camera power connection

Step 2: Camera operation

Connect to the computer

After turning on Thumb, connect it to the computer with a USB cable and it will be recognized as a removable disk.

Note: If it cannot be recognized after connecting to the computer, please confirm that there is a microSD card inserted in the Runcam Thumb; if the files in the microSD card cannot be read normally, please replace the USB cable or the computer USB interface and try again.

Firmware upgrade

Firmware upgrade status (green light flashes slowly, the upgrad soon if the green light flashes quickly, the camera is shut dow completed)

Please make sure that the USB power supply or terminal power su before upgrading.

Manually copy the firmware file (Thumb.bin) to the root directo microSD card. For specific steps, please refer to: https://runcam.com/download/Thumb.

If you want your Runcam Thumb to get the latest features and pe make sure that the camera software you are using is the latest

Gyroscope Data Generated Function

Create a csvopen.txt file manually to the root directory of the camera’s microSD card. It will take effect only after the camera is restarted. At this time, the camera will keep 1080p50fps video and gyroscope data at the same time in the SD card.

Technical Support

Please visit: https://support.runcam.com/hc/en-us

Parameters Table

References

• RunCam - download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>