RunCam 32957956146 Born for RC Fanatics User Manual
- June 7, 2024
- RunCam
Table of Contents
RunCam 32957956146 Born for RC Fanatics User Manual
Function
Buttons Description
WiFi/Mode switch
- Press to turn on/off WiFi.
- Long press to switch video/photo/setting mode.
- Under recording mode: press to pause/continue recording.
- Under setting mode: press to confirm, long press to quit.
Power/Shutter
- Press to start/stop recording/photo shooting.
- Long press for 3 seconds to turn on/off.
- Under setting mode: press to select down.
LED Color Description
LED1 Blue (WiFi)
Constantly on when being connected, blinks when connecting.
LED1 Orange (Menu Function)
- Constantly on when under setting mode.
- Blinks when updating firmware.
- Constantly on when being connected to the PC/USB disk/Webcam.
LED2 Blue (Video)
Constantly on when standby recording, blinks slowly when recording, blinks
quickly when SD card is abnormal or missing
LED2 Green (Photo)
- Constantly on when being ready for photo shooting, blinks with every shot.
- Blinks quickly in low power state.
LED2 Red (Charge)
Constantly on when charging, go off when fully charged.
/TV-out settings
Video Size
1920*1440@30fps、1080p@60fps、1080p@30fps、
720p@120fps、720p@60fps、 VGA@240fps
The video size increases with resolution and frame rate.
Loop Recording
With this feature, the recording process continues to record at the beginning,
erasing the previously recorded material and replacing it with the new
content. The video segment length can be set.
Auto Recording
Record when turning on.
Metering Mode
Center Metering
Center Metering evaluates the light in the middle of the frame and its
surroundings to adjust the exposure.
Average Metering
Average Metering uses the light information coming from the entire scene and
averages for the final exposure setting.
Spot Metering
Center Spot Metering evaluates the light in the middle of the frame to adjust
the exposure.
TV Mode
NTSC/PAL
TV system to be selected
Power-saving
The camera will turn off automatically if no operations are performed for the
length of time selected.
Image Flip
On screen display upside down, recording video upside down.
G-sensor
By measuring proper acceleration (“g-force”) every x seconds selected to make
images on screen displayed upright.
Language (OSD Language)
English, 简体中文, 繁体中文, Français, Deutsche.
OSD Language to be selected.
Buttons Beeping
Beep when pressing buttons.
System
Reset
Restore the factory default settings.
System information
Display the Firmware Version
SD card information
Display SD card capacity and usage information.
Format micro SD card
The data is unrecoverable after formatting the micro SD card, please make a
backup copy
Device Status
After being connected to the computer by a USB cable, the device is in MSDC
mode.
MSDC
Removable Disk
Note: In standby mode, quick press the power button three times to reset to factory settings.
Support APP via WiFi
Live Preview
Video/Photo mode switch
Video/Photo playback
Parameter settings
Warning: this product is not applicable for being used as a Dashcam. Please take out the battery while using USB interface for power supply, so as to avoid damage caused by the high temperature inside the battery
Android and iOS APP
Search “RunCam” on Google play and Apple Store, or download on our
website http://www.runcam.com/download
Default password for WiFi function: 1234567890
Parameter
| Field of View (FOV) | FOV 120° |
|---|---|
| Sensor Resolution | 4 megapixels |
| Video Resolution | 1920*1440@30fps / 1080p@60fps / 720p@120fps |
| Video File Format | MOV |
| TV Mode | NTSC/PAL |
| Interface | Micro USB |
| max Micro SD Card Supported | 64G(need class 6 or above, recommend Class |
10/UHS-I/UHS-II/UHS-III)
Image Flip(Manual/Auto)| 180° Rotation
Dimension| 66mm(L)38mm(W)21mm(H)
Battery Capacity| 850 mAh
USB Power Input| DC 5V-15V
Working Current| <600mA
Weight| 49g(with battery) 35g(without battery)
