Runcam Racer 5 Gyro Racing FPV Camera User Manual

June 7, 2024
RunCam

Runcam Racer 5
USER MANUAL

Joystick Control

Runcam Racer 5 Gyro Racing FPV Camera - control

UART Control

  1. Flight controller wiring
    Note: Take UART3 for example
    Runcam Racer 5 Gyro Racing FPV Camera - UART Control

  2. Betaflight 3.3 or above setting
    Runcam Racer 5 Gyro Racing FPV Camera - above setting

  3. UART ControlRuncam Racer 5 Gyro Racing FPV Camera - UART Control 2

Runcam Racer 5 Gyro Racing FPV Camera - UART Control 1

When connected, The buzzer on Flight Controller will beep for 3 times; When disconnected, The buzzer on Flight Controller will beep for 2 times only; If connected successfully, you can long-press the up button to enter the OSD menu, right button to switch preset scenes, left button to calibrate voltage and down button to reset OSD.

Dimensions & Installation

Runcam Racer 5 Gyro Racing FPV Camera - Dimensions

OSD Menu

QUICK SETTINGS

Runcam Racer 5 Gyro Racing FPV Camera - OSD Menu

Quick settings:

  • Long press UP button for three seconds to access to the OSD setting‘s screen
  • Long press the LEFT button for three seconds to calibrate the Gyro,The Racer5 camera PCB must be kept horizontal.
  • Long press DOWN button for six seconds to reset OSD settings to default
  • Long press the RIGHT button for three seconds to switch between the camera presets Runcam Racer 5 Gyro Racing FPV Camera - OSD Menu 1
  • CLR: clear the ID character;
  • ALARM: low voltage warning value, smartly judge the warning value of the battery when it’s low; if set it manually, then it saves the manual preset value;
  • Press the middle button to switch ON / OFF, then move to POS to enter the position adjustment.
  • Sharp View: Turn on, it will increase the image details, but also noise.
  • WIDESCREEN: Dynamic stretching to the aspect ratio of 16:9 to match with a screen in 16:9, the image center won’t change but the edge will be widened.

Camera Menu

SETUP MENU

Runcam Racer 5 Gyro Racing FPV Camera - SETUP MENU 1

  • LANGUAGE: ENGLISH
  • FLIP ( OFF / H-FLIP / V-FLIP / HV-FLIP )
  • BRIGHTNESS ( 128/ 0-255 )
  • CONTRAST ( 138 / 0-255 )
  • SHARPNESS ( 128 / 0-255 )
  • HUE ( 90 / 0-180 )
  • COLOR GAIN ( 138 / 0-255 )

Parameters

Model RunCam Racer 5
Image Sensor Super WDR CMOS Sensor
Horizontal Resolution 1000TVL
Lens 1.8mm FOVI60°
Screen Format 4:3 /Widescreen Switchable
Signal System NTSC / PAL Switchable
Mirror/Flip Available
Integrated OSD Yes
Built-in gyro Yes
One-Touch Scene Setting Personal / Lightrax
S/N Ratio >50dB
Electronic Shutter Speed Auto
Min. Illumination 0.0ILux@ 1.2F
WDR Super WDR
Day/Night Color
Menu Control Cable Control / Remote Control
Power DC 5-36V
Current 11 OmA@SV / 40mA@12V
Housing Material ABS
Net Weight 6.1g
Dimensions LI9mmW19mmH21mm

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

RunCam User Manuals

Related Manuals