Runcam 10X Hitcham 4K 10X Zoom Camera User Manual
- June 1, 2024
- RunCam
Table of Contents
- Runcam 10X Hitcham 4K 10X Zoom Camera
- Product Information
- Product Usage Instructions
- Quickstart Guide
- Basic Operating Instructions
- Description of Screen Icons
- OSD Operating Instructions
- Resolution Setting
- Image Settings
- Scenario Mode
- Recording Volume
- Firmware Update
- Technical Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Runcam 10X Hitcham 4K 10X Zoom Camera
Product Information
Specifications:
- Video Resolutions: 4K@30fps, 2.7K@60fps, 1080P@90fps, 1080P@60fps, 1080P@30fps
- Zoom: Digital Zoom In/Out
- Storage: MicroSD Card slot
- Connectivity: Type-C Charging/Data Cable Port
- Mounting: M-LOK Rail Fixing Hole, Picatinny Rail Mounting Bracket
Product Usage Instructions
Basic Operations:
- To start recording, press the middle key. To stop/start recording, short press the middle key. To call out/exit OSD, long press the middle key.
- Use the up and down keys for digital zoom and left/right keys to switch scenarios (Day, Night, Green Image, Negative).
- Eyepiece adjustment is done by rotating it while power on/off is controlled by pressing the power button.
- LED indicators show different statuses – Charging (Green), Standby (Red), Video Recording (Flashing Red), WiFi Connected (Steady Blue).
OSD Operating:
- Long press the Menu button to call out OSD for menu navigation.
- Use the up and down keys to select options such as Power Off, Menu Settings, WiFi, and Playback.
- Short press the Menu key to confirm selections and long press to exit OSD.
Image Settings:
The camera supports various image settings including resolution options
like 4K, 2.7K, and 1080P. It also offers Zero Reticle and FlashBack options.
User Profile & Calibration:
There are four user profiles available for customization. To calibrate,
choose a user profile and follow on-screen instructions to adjust the zero
reticle for accuracy.
Frequently Asked Questions (FAQ)
-
Q: How do I start recording with the HitCam?
A: Press the middle key to start recording and use the same key to stop/start recording. -
Q: How can I adjust the zoom on the camera?
A: Use the up and down keys for digital zoom in/out. -
Q: What do the different LED indicator colors signify?
A: Green indicates charging, red is standby mode, flashing red means video recording, and steady blue shows WiFi connection.
Quickstart Guide
Basic Operating Instructions
Description of Screen Icons
OSD Operating Instructions
- Power Off:Select “Power Off” and Short Press the Menu Key ( Confirm ) to Turn Off the Camera
- WiFi Start WiFi:Select “WiFi” and Short Press the Menu Key ( Confirm ) to Turn On WiFi . The screen displays SSID and connection password.
- PlayBack:Select “PlayBack” and Short Press the Menu Key ( Confirm ) to Enter the PlayBack Mode and Select the Video File in the SD Card to PlayBack on the Screen
- Menu Setting:Select “Menu” and Short Press the Menu Key ( Confirm ) to Enter the Menu Settings
Resolution Setting
Support 4K@30fps/2.7K@60fps/1080P@90fps/1080P@60fps/1080P@30fps and so on.
Zero Reticle
Zero Reticle Operation Diagram
- Choose any User Profile then confirm, start to enter the calibration screen.
- If the currently selected User Profile has already saved calibration data, it will prompt whether to re-calibrate.
FlashBack
The flashback function must be used in conjunction with the “FlashBack Cable”; trigger the “Flashback Cable” switch after it is turned on, and it can record videos from 5-15 seconds before the trigger to 15 seconds after the trigger. If the switch continues to be triggered during the recording, the video after the last trigger 15 seconds as the last recording time.
Image Settings
- Parameter settings such as white balance, ISO, shutter, exposure, saturation, contrast can be modified.
- After entering the image settings, press the Up, Down, Left, and Right keys to modify and switch settings.
Scenario Mode
- Support 4 modes, after selection, you can see the actual picture effect on the screen, and the video recording is also the current effect ( It also can be done under preview by using the Left and Right keys to quickly switch ) Scenario Description.
- Scenario Description
- Day ( Color )
- Night ( Black and White & Infraration Supported ) Green Image ( Infraration Supported )
- Negative
LoopRecording
The loop recording function is enabled by selecting 1, 3, 5Minutes and other recording durations. After enabling, when the capacity of the SD card is insufficient, the old video files will be automatically deleted to make room for new video files.
Recording Volume
Set the volume of the recording, which can be set to low, medium (default), and high respectively.
-
Auto PowerOff
After this setting is on, if there is no operation within the set time, it will automatically shut down. 1Min, 3Min, 5Min can be set respectively . -
Vibration
After opening, there will be vibration when powering on, recording, stopping recording, etc. -
Format SD Card
Formatting the SD card will erase all data in the SD card. -
Language
Support English, Simplified Chinese, Traditional Chinese, Japanese and so on. -
Reset
After selecting and confirming, the factory settings will be restored. -
Firmware Version
Current firmware version.
Firmware Update
- Current firmware version.
- To ensure the best performance of our product, please update it to the latest version of firmware. Please check the link below for reference on how to update: http://wwwhitcam.com/download/hitcam
- Firmware upgrade status
- red and blue lights flashing quickly automatic shutdown after upgrade
Technical Support
http://www.hitcam.com/support/en-us