PERLESMITH Table top tv stand User Manual
- June 7, 2024
- Perlesmith
Table of Contents
- IMPORTANT SAFETY INFORMATION
- Check the VESA Pattern of TV before the Installation
- Weight Restrictions
- Tools Needed (Not lncluded)
- Supplied Parts and Hardware List
- Step 1 Connect the TV Brackets I to Brackets II
- Step 2 Attach TV Brackets to TV
- Select TV Screws
- Step 3 Attach Height Adjust Bracket to TV
- Step 4 Assemble the Base
- Step 5 Secure TV to Column
- Step 6 Cable Management
- Remove Your TV
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Table Top TV Stand V2.0
Model: PSTVS16
Website: www.perlesmith.com
Thank you for choosing this Perlesmith product! At Perlesmith we strive to
provide you with the best quality products and services in the industry.
Please share your experience of our product with others at
www.perlesmith.com/pages/reviews if
you are satisfied. Should you have any issues, please don’t hesitate to contact
us.
Technical Support:
1-800-556-6806 Mon-Fri 10am – 5pm (PST)
(USA) (CAN)
Other Info:
supportus@perlesmith.com
(US/CA/DE/UK/FR/IT/ES/AU)
IMPORTANT SAFETY INFORMATION
- Please read through these instructions completely before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at supportus@perlesmith.com.
- Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact customer service at supportus@perlesmith.com.
- Not all parts and hardware included will be used.
- Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
- Please check www.perlesmith.com for more products and company information.
Check the VESA Pattern of TV before the Installation
Minimum VESA Pattern: 200x100mm(8x4in.)
100 mm ≈ 4 in.
200 mm ≈ 7 7/8 in.
300 mm ≈ 11 3/4 in.
400 mm ≈ 15 3/4 in.
600 mm ≈ 23 6/10 in.
Weight Restrictions
WARNING :
DO NOT exceed the maximum weight indicated. This mounting system is intended
for use only with the maximum weights indicated. Use with products heavier
than the maximum weights indicated may result in failure of the mount and its
accessories, causing possible injury.
If your TV weighs more, this mount is NOT compatible.
Tools Needed (Not lncluded)
Supplied Parts and Hardware List
Step 1 Connect the TV Brackets I to Brackets II
Step 2 Attach TV Brackets to TV
Select TV Screws
Only one screw size fits your TV.
Screw length: Verify adequate thread engagement with screws or screws/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Note:
- Only tighten the screws enough to securely fasten TV brackets to TV. DO NOT overtighten the screws.
- If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at supportus@per-lesmith.com.
Option A ( For Flat Back TV )
Option B (For Round Back TV)
Option C (For TV with A “Bump”)
Spacers may be necessary for 2 holes ONLY.
Option D
Spacers may be necessary when brackets interfere with cables or USB.
Step 3 Attach Height Adjust Bracket to TV
Secure the height adjust bracket d to TV via TV bracket assembly using screws e and hex key f
IMPORTANT : Ensure all brackets are securely fastened before moving on to the next step.
Step 4 Assemble the Base
Step 4-1 Attach the Pads to the Tempered Glass
Peel off the back paper of pads L and attach them to the rough side of the tempered glass K in the corners
Step 4-2 Connect Column O to the Smooth Side of the Tempered Glass
Step 5 Secure TV to Column
Step 5-1 Hang TV to Column
Note : If needed, the height of the TV from the ground can be adjusted.
Step 5-2 Secure TV to Column
Insert the lock screw Q through the hole on the height adjust bracekt and that on the column, then tighten the screw using screwdriver (not included) to secure the TV to column
Step 6 Cable Management
HEAVY! You may need assistance with this step.
Remove Your TV
Remove lock screws Q , and need two people cooperation to hold the TV at the same time.
Remove TV from the hook on the column
HEAVY! You may need assistance with this step.
Thank you again for choosing this Perlesmith product!
All of us at Perlesmith do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied. Should you have any issues, please don’t hesitate to contact us.
Technical Support: 1-800-556-6806 Mon-
Fri 10am – 5pm (PST) (USA) (CAN)
Other Info: supportus@perlesmith.com
(US/CA/DE/UK/FR/IT/ES/AU)
Please check www.perlesmith.com for more products
and company information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>