CareCo WA02010034 Glider 4 Wheel Walker User Manual
- June 12, 2024
- CareCo
Table of Contents
- CareCo WA02010034 Glider 4 Wheel Walker
- Product Information
- Product Usage Instructions
- INTRODUCTION
- READ BEFORE USE:
- USAGE
- PARTS DESCRIPTION
- SAFETY INSTRUCTIONS
- ASSEMBLY
- DISASSEMBLY
- HANDLING & TRANSPORTING
- ACCESSORIES
- CLEANING & HYGIENE
- MAINTENANCE
- Tools Required
- SPECIFICATIONS
- WARRANTY
- RECYCLING & DISPOSAL
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CareCo WA02010034 Glider 4 Wheel Walker
Product Information
Product Name | CareCo Glider 2.0 Rollator |
---|---|
Product Code | WA02010034 |
Introduction | The CareCo Glider 2.0 is the ideal partner for users on the go |
and users who want to stay active. It features a convenient
collapsible aluminium frame and a feather-light 6.6kg carry weight,
making it a reliable aid for both indoor and outdoor use. Please
note that product information and designs are subject to change
without notice due to CareCo’s commitment to continuous product
improvement.
Expected Lifetime| The expected lifetime of this rollator is 5 years when used
for
its intended purpose and following all maintenance and care
instructions. Proper maintenance, careful handling, and necessary
repairs will significantly extend the product lifetime. Improper
use of the rollator may reduce its expected lifetime.
Maximum Weight Capacity| 136 kg
Maximum Carry Bag Load| 5 kg
Product Usage Instructions
Unpacking:
Remove all outer packaging before placing components on a level surface. If
any parts are missing from the product box, please contact CareCo immediately.
Assembly:
Follow these steps to assemble the rollator:
- Insert the front wheel assembly into the base of the front frame. Secure it using the 2x C-Clips provided.
- Insert the rear wheel assembly into the base of the rear frame. Secure the assembly to the desired height option by pressing and locating the button spring clip. Repeat on the other side.
- Place the rollator upright on its wheels. Insert the handle into the top of the frame. Secure the handle to the desired height option using the provided star knob. Repeat on the other side.
- Locate the brake cable into the S Clip to secure it to the frame. Repeat on the other side.
- Attach the backrest to the frame by pressing and locating the button spring clips into the bracket.
Disassembly:
To disassemble the rollator, follow the assembly instructions in reverse
order.
INTRODUCTION
The CareCo Glider 2.0 is the ideal partner for users on the go and users who
want to stay active.
A convenient collapsible aluminium frame and a feather-light 6.6kg carry
weight make this rollator the go-to reliable aid for both indoor and outdoor
use.
Due to CareCo’s commitment to continuous product improvement, product
information and designs are subject to change without notice. No claims can be
made based on the data or illustrations in this user manual.
READ BEFORE USE:
Before you begin using your rollator, please ensure you, and any persons that may assist you in its use, take the time to read, understand and follow the instructions given within this manual carefully. We recommend that you keep this user manual in a safe place for future reference.
If you have any questions about wheelchair use, maintenance, or
safety,please contact CareCo:
CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree , CM77 7AT,
Tel: 0333 015 5000 www.CareCo.co.uk
Visually impaired users can view this manual in PDF format at the following
URL: www.careco.co.uk
USAGE
This rollator is intended for users who experience difficulty in walking
and/or have reduced mobility.
Unauthorized modifications and/or installation of unapproved 3rd party
components and accessories are not permitted.
This rollator is suitable for indoor and outdoor use.
EXPECTED LIFETIME
The expected lifetime of this product is 5 years, provided the product is used
for its intended purpose and all maintenance and care instructions are
followed.
Proper maintenance, handling with care and repairs (if necessary), will
significantly extend the product lifetime. Improper use of the product will
reduce the expected lifetime.
The expected lifetime is not related to the product warranty.
PRODUCT IDENTIFICATION
The product identification label is located on the cross-frame underneath the
seat.
PARTS DESCRIPTION
- Height Adjustable Handle
- Backrest
- Seat
- Bag
- Front Wheel
- Rear Wheel
- MAXIMUM WEIGHT CAPACITY: 136 KG
- MAXIMUM CARRY BAG LOAD: 5 KG
SAFETY INSTRUCTIONS
- Only use the rollator for its intended use, incorrect use can lead to hazardous situations.
- Only use the rollator on even and solid surfaces
- Do not overfill the product bag –Maximum load 5KG
- Prolonged exposure to hot or cold temperatures can cause parts of the rollator to become hot or cold.
- Do not use the rollator as a transportation device
- Replace damaged or significantly worn parts if and when required.
- Periodically test the brakes to ensure safe use.
- Do not sit on the rollator when on an incline or uneven ground
UNPACKING
Remove all outer packaging before placing components on a level surface.
Contact CareCo immediately if any parts are missing from the product box.
ASSEMBLY
- Insert the front wheel assembly into the base of the front frame. Secure using 2x C-Clips provided.
- Insert the rear wheel assembly into the base of the rear frame.
- Secure the assembly to the desired height option by pressing and locating the button spring clip.
- Repeat on the other side.
- Place the rollator upright on its wheels
- Insert the handle into the top of the frame.
- Secure the handle to the desired height option using the provided star knob. Repeat on the other side.
- Locate the brake cable into the “S” Clip to secure to the frame.
- Repeat on the other side.
- Attach the backrest to the frame by pressing and locating the button spring clips into the bracket.
DISASSEMBLY
Reverse the assembly instructions and use them as a guide to disassemble the rollator.
HANDLE HEIGHT ADJUSTMENT
- Loosen the star knob by turning it anticlockwise.
- Remove the star knob from the handle bracket.
- Lift or lower handle to the desired height. Reinsert the star knob into the handle bracket.
- Tighten the star knob by turning it clockwise. Repeat on the opposite side
To set the correct handle height, stand upright behind the rollator with arms
by side.
Adjust the height of the handgrips so they are level with the users’ wrists.
warning
Ensure both handles are level before using the rollator.
APPLYING THE BRAKES
Stopping
-
Gradually squeeze both brake levers to stop the rollator.
-
Release the brake levers to start moving again.
-
Locking
Push both brake levers downwards to apply the brake lock.
An audible “click” will confirm the brakes are secure. -
Unlocking
Pull both brake levers upwards to unlock the brakes.
Turning
Squeeze the left and right brake levers individually to rotate the rollator.
Release the brake lever to stop rotating.
WARNING
Ensure the rollator is stationary when locking the brakes. Regularly test
the brakes to ensure they function correctly.
FOLDING
- Push both brake levers downwards to apply the brake lock. Lift the backrest upwards to fold the backrest.
- Lift the seat upwards to reveal the support bar.
- Pull the support bar upwards to fold the rollator.
UNFOLDING
- Unfold the backrest.
- Push downwards on the seat to open the rollator.
- Pull both brake levers upwards to unlock the brakes.
BACKREST
-
Attaching & Removing the backrest
Secure the backrest to the frame by pressing and locating the button spring clips into the bracket. Remove the backrest by pressing the button spring clips and pulling the backrest upwards. -
Folding
Raise the backrest to fold. -
Unfolding
Lower the backrest to unfold.
WARNING
Ensure the backrest is secure before using the rollator as a seat.
SEAT
The seat height can be adjusted by raising or lowering the wheel assemblies.
- Place the rollator upright on its wheels
- Push both brake levers downwards to apply the brake lock.
- Remove the C-Clips from the front frame
- Adjust the front wheel assembly to the desired height
- Secure using the C-Clips
- Press and locate the rear wheel assembly spring clip to the desired height – repeat on the opposite side.
- Ensure all wheels touch the floor to confirm they are at the same height.
- Pull both brake levers upwards to unlock the brakes.
SITTING
Ensure the rollator is on a flat and even surface and the locking brakes are
applied.
WARING
Do not use the product as a transportation device.
HANDLING & TRANSPORTING
Carry the rollator using the rubber handles and/or areas of the frame that are clear of pinch points.
ACCESSORIES
WALKING STICK / CANE HOLDER
The rollator is equipped with a walking stick/ cane holder out of the box.
Place the walking stick/cane into the lower cup section
Secure the walking stick/ cane to the rollator frame using the velcro
included.
BAG
Attaching
- Lift the seat upwards to reveal the support bar.
- Loop the eight bag straps over the frame bar and secure using the snap on fasteners.
Removing
- Lift the seat upwards to reveal the support bar.
- Undo the eight snap on fasteners and unloop the straps from the frame.
CLEANING & HYGIENE
- To keep the rollator in optimal condition, it should be cleaned regularly with a damp cloth and/or mild soap. Do not use abrasive cleaners/materials.
- Dry the rollator after cleaning and after use in bad weather conditions.
MAINTENANCE
By performing simple maintenance, the user can extend the life expectancy of the rollator.
- Check fasteners regularly and tighten if necessary
- Check tyre condition regularly
- Check brake functionality
- Check wheels move freely
- Check upholstery for wear
ADJUSTMENTS
BRAKE CABLE ADJUSTMENT
Difficulty Level
Tools Required
- 8mm Spanner x1
- 10mm Spanner x1
The user can adjust the brake cable using simple household tools.
Loosen the lock nut (A) by rotating it anticlockwise.
Adjust the brake cable tension by rotating the brake adjuster (B).
Tighten the lock nut (A) by rotating it clockwise.
SPECIFICATIONS
Length | 62cm |
---|---|
Width | 57cm |
Height (Adjustable) | 78-94cm |
Seat Height | 48-56cm |
Seat Width | 38cm |
Seat Depth | 24cm |
Cushion Height | 3.5cm |
Folded Width | 32cm |
Folded Length | 60.5cm |
Folded Height | 85cm |
Arm to arm distance | 45.5cm |
Net weight | 6.6kg |
Gross Weight | 7.6kg |
Max Carry Bag Load | 5kg |
Rear wheel size | 6 inch |
Front wheel size | 6 inch |
Max user weight | 136kg |
Frame material | AL. |
Wheel material | PVC |
Handle material | TPR |
Suspension | N/A |
Bag depth | 20cm |
Bag width | 19cm |
Bag length | 36cm |
WARRANTY
If a component requires repair or replacement due to a specific manufacturing or material defect within its warranty period, it will be repaired or replaced free of charge by CareCo.
- 1-YEAR LIMITED WARRANTY
Consumables are not covered under normal warranty circumstances unless they have clearly suffered excessive wear or damage as a direct result of a manufacturing defect. These items include grips, tyres, and rubber accessories. The guarantee for the rollator is not transferable. Parts that have been previously replaced that require subsequent repair or replacement due to manufacturing defects will be honoured for the remainder of the rollator’s warranty period. Parts that have been purchased by the end user after the original warranty period has expired have a warranty period of 12 months. CareCo is not responsible if the rollator requires repair or replacement as a direct result of:
- Changes or modifications made to the product that fall outside of the manufacturer’s specifications
- The product not being serviced or maintained according to the manufacturer’s recommendations contained in this user manual.
- Negligence, Accidental Damage, and Improper use
- Repairs attempted before CareCo have been notified
- The product being purposely damaged or mistreated
In the unlikely event that this product is recalled, CareCo will notify the user. Please ensure that your contact information is up to date.
RECYCLING & DISPOSAL
Disposal or recycling of the rollator should be completed through an approved
distributor or disposal facility. (Local disposal & recycling regulations may
apply)
Alternatively, contact CareCo for advice on disposal.
Materials:
-
Packaging:
Cardboard Box, Low-density polyethylene bag,PE foam -
Upholstery:
Foam, nylon fabric, sponge with PVC coating -
Plastic:
Hand grip, star knob, brake hose, brake lever, wheel caster, front fork, tipper, tube plugs cane holder -
Aluminum:
Mainframes, push handle, detachable leg tube, backrest tube, crossbar -
Steel:
Seat tube, bearings, brake pad, brake cable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>