aiwa AI7015 Flashback Wireless Kit User Manual

aiwa AI7015 Flashback Wireless Kit

Flashback Wireless Kit

WHAT INCLUDED

• Ai7015 Flashback wireless kit
• Wired Earbuds
• User manual with warranty information
• A19004 headphones +2 extra sets of foam cushion covers
• USB-C Charging Cable for kit 80cm
• USB-C Charging Cable for headphone

Specifications

• Ai7015 Flashback wireless kit
• Wired Earbuds
• User manual with warranty information
• AI9004 headphones with 2 extra sets of foam cushion covers
• USB-C Charging Cable for kit (80cm)
• USB-C Charging Cable for headphone
• Power supply: Rechargeable battery 3. 7V
• Speaker Output power: 1W (Watts)
• CD playback frequency range: 31.5Hz-16kHz+3dB
• CD signal-to-noise ratio: ≥50dB
• CD sampling frequency: 44.1 kHz
• Digital-analog conversion method: 16-bit
• Speaker impedance: 4 (ohms)
• Unit Size: Q145mm X25mm
• Weight: about 430g

SAFETY PRECAUTIONS

READ AND FOLLOW ALL INSTRUCTIONS. HEED ALL WARNINGS.

1. Do not use the device near water.
2. Clean only with a dry cloth.
3. Do not block any ventilation openings.
4. Keep external objects away at a minimum distance of 4 inches around the device for sufficient ventilation.
5. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
6. No naked flame sources, such as lighted candles, should be placed on or next to the device.
7. Do not operate near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug this device during lightning storms or when unused for a long period of time.
10. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on or next to the device.
11. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
12. Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
13. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    • If liquid has been spilled, or objects have fallen into or onto the product.
    • If the product has been exposed to rain or water.
    • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
    • If the product has been dropped or damaged in any way.
    • When the product exhibits a distinct change in performance.
14. Disconnect plugs completely from sockets.
15. Do not expose batteries to excessive heat.
16. Excessive sound pressure from earphones and headphones can cause hearing loss.
17. Dispose of batteries properly based on local laws and regulations.

FOLLOW THE ADVICE BELOW FOR SAFE OPERATIONS ON PROTECTION AGAINST LASER ENERGY EXPOSURE:

• As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing.
• Stop operation immediately if any liquid or solid object falls into the cabinet.
• Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly.
• Do not place any object that is not a suitable disc inside the CD compartment. The laser diode will stay ON while the CD door is kept open. Do not keep the CD compartment door open.
• If the device is unused for a long period of time, make sure that all power sources are disconnected from the device. Remove all batteries from the battery compartment.
• This device employs a laser. The use of controls or adjustment or performance of procedures other than those specitied here may result in exposure to hazardous radiation.
• This device should not be adjusted or repaired by anyone except qualified service personnel.

Product Usage Instructions

YOUR CD PLAYER

1. External DC charging port 5V
2. Carry strap hole
3. On/off button
4. Play/pause button
5. Programming button
6. Repeat button
7. Stop button
8. Previous
9. Volume –
10. Built-in speaker
11. A-B repeat
12. Speed+
13. Speed-
14. Display screen
15. Middle cabinet
16. Next
17. Volume +
18. Function button/Bluetooth Emit
19. CD door
20. Earphone port
21. USB disk port
22. Audio input port
23. CD door OPEN/CLOSE switch

Power Sources
Put the Power button to ON position to power on this unit. Prior to using this unit, fully charge the battery.

FUNCTION OF UNIT BUTTONS

CD Function – Playing Music
This unit is compatible with CD discs and can program up to 99 songs for MP3 discs and USB.

Note: If Speed + button is pressed and you want to return to normal speed, press Speed – button.

POWER SOURCES

1. This unit has a built-in rechargeable battery for power supply.
   Put the Power button to ON station to power on this unit, Prior to using this unit, we recommend you fully charge the battery.

2. Lithium battery charge
   When the battery is out of power, you need to connect the external USB 5V for charging. When charging, the battery symbol on the LCD flashes; when fully charged, the battery symbol on the LCD is no longer flashing and full charge is displayed. It takes about 4-5 hours to fully charge with 5V/1A charging current.

CD FUNCTION PLAYING MUSIC

1. Push the CD door switch to open the CD door and place the CD/MP3 disc on the CD mechanism, then close the CD door. After a few seconds, the first track will be played automatically.

2. Press the play/pause button to temporarily stop play. Press this button again to resume play.

3. If you want to stop play during playing status, press the stop button to stop play.

4. During playing status, press the previous button to skip to the previous track; press the next button to skip to the next track.

5. Press REPEAT while in payback mode to cycle through the repeat modes.
   The following appears on the display:

   • Flashing -Repeat the current track

   • Repeat all tracks

   • FOLDER Repeat all tracks in the current folder

   • RAND-Random playback
     To cancel repeat mode, press Repeat until the RAND icon disappears on the display.

   • NOTE:

   • The repeat function is applicable to CD/USB mode only.

6. A-B Repeat play: If you short press the A-B repeat button during playback, this is the starting point A. If you short-press the second time, this is the ending point B, and the CD will play from A to B repeatedly. Short press this button a third time to end the A-B repeat function and return to normal playback.

7. Programming play: when the play is stopped, press the programming button to enter the programming status. Press the next or previous button to select the song to be programmed, and then press the programming button to save a song. It can program up to 20 songs for CD and can program up to 99 songs for MP3 discs and USB. After programming, press the play button to play the songs in the programmed order.

8. Speed adjustment : short press the SPEED+ button to get faster. (5 gears can be added). Short press the SPEED – button to slow down (5 gears can be added) .
   Note: If pressed Speed + and want to back to normal need to Speed – vice versa

USB FUNCTION PLAYING MUSIC

1. Insert the USB disk into the USB port and press the function button to enter the USB play mode, the songs in the USB disk will be played directly with “USB” displayed on the LCD.

2. If you want to end the play of the USB disk, press the stop button. After the player is stopped, you can extract the USB disk.
   Note: Under the power-on status, press the function button to select different functions in the following order:

3. Using the U disk function, A-B repeat playback is the same as CD operation, and variable speed playback operation is the same as CD operation.

   • Do not directly extract the USB disk while playing, otherwise, it may cause a program error.

CONNECTING YOUR EARBUDS
Insert the wired earbuds (included) into the 3.5mm Headphone Jack located at the side of your music player to listen to your music or audio. Insert the wired earbuds (included) into the 3.5mm Headphone Jack located at the side of your music player to listen to your music or audio.

IMPORTANT: Listening at high volumes can cause hearing damage. Keep the volume at a moderate level

CONNECTING AUXIN
To use the AUX function, connect your audio device to the AUX-IN jack using a 3.5mm AUX cord. Then the LCD screen will display “AUX”. Your speaker will start to play music from your connected audio device.

USB Function – Playing Music

Connecting Your Wireless Headphones
Power on your wireless headphone or Bluetooth speaker and put it in Bluetooth pairing status. The two devices will pair automatically. Once paired successfully, the unit’s sound will turn off.

1. During the CD/USB/AUX playback, long press the function button, and then the Bluetooth symbol (**) )flashes on the LCD display. And this unit in the Bluetooth emitting status. Power on your wireless headphones or Bluetooth speaker and put at bluetooth paring status, then these two devices will pair automatically. after pairing successfully, this unit sound will off.
2. If need to stop the Bluetooth emitting, long press the function button to exit. Then the Bluetooth symbol (** will disappear from LCD display, and playback the music on this unit again.

Maintenance
Ensure proper cleaning and storage of the product to maintain its performance and longevity.

1. If the unit body is very dirty, you shall use a soft cloth that has been dipped in clear water and twisted to wipe the unit body. If you want to use chemical cleaners, please read the relevant instructions first. Never use alcohol or thinner to clean the case.
2. After using for a long time, the laser lens of this unit may become dirty, causing the sound to pause when playing. In this case, use a camera lens brush to gently wipe off the dust, and then blow it with a blower. You can also wipe the laser lens with a clean cotton swab that is dipped with a little water-free alcohol, and then wipe the lens again with another clean cotton swab.
3. Do not touch the data surface (silver surface) when holding the disc by hand to avoid the sound pause during play.
4. If the data surface of the disc is dirty, wipe with a soft damp cloth and then dry it. Note: wipe the disk straight from the center and don’t rotate the disc when wiping.
5. Do not write or affix label on the disc

Guideline for Simple Troubleshooting

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to Which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

WARRANTY
This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered By Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:
Call 877-397-8200 or visit our website at www.aiwa.co. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address of the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

FAQ (Frequently Asked Questions)

How do I pair my wireless headphones with the unit?
To pair your wireless headphones, ensure they are powered on and in Bluetooth pairing mode. The unit will automatically detect and pair with them.

What should I do if the unit does not power on?
If the unit does not power on, check the battery level and ensure it is fully charged before use. If the issue persists, contact customer support for assistance.

02024 Aiwa Acquisitions LLC.
195 Carter Drive
Edison, NJ 08817
www.aiwa.us.com
Support: 1-800-592-9541

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>