Kenmore Top Loading Washing Machine Control Panel And Feature User Manual
- June 7, 2024
- Kenmore
Table of Contents
QUICK REFERENCE GUIDE
KENMORE TOP LOADING WASHING MACHINE
CONTROL PANEL AND FEATURE
Appearance may vary depending on the model.
1. POWER
Touch to turn on/off or to stop/cancel a cycle.
2. LOAD/CYCLE
“First select a load type from the “Load” section and then select the cycle
from the “Cycle” section to get the best combination cycle available for the
type of items you are going to wash. See “Cycle Guide” for cycle details.”
3. LCD TIME/STATUS DISPLAY
The display shows the time required for the cycle to complete.
Factors such as load size and water pressure may affect the time shown in the
display. Tightly packed loads, unbalanced loads, or excessive suds may cause
the washer to adjust the cycle time as well.
If you have set a delay start to the cycle, the display will show the delay
time adjusted.
ADD GARMENT
When Add Garment is lit, you may pause the cycle, open the lid, and add items.
Touch and hold the START/PAUSE button to start the cycle again.
4. START/PAUSE
Touch and hold the START/PAUSE to start cycle. Touch during a cycle to pause
cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
5. CYCLE MODIFIERS (Not all modifiers are available on all cycles)
SPIN SPEED
Touch to modify the cycle’s available spin speeds (Off, Medium, Fast).
WASH TEMP
Touch to modify the cycle’s available water temperatures (Tap Cold, Cold,
Cool, Warm, Hot).
SOIL LEVEL
Touch to modify the cycle’s available soil levels. Increase soil level for
heavily soiled items and decrease soil level for lightly soiled items (Extra
Light, Light, Normal, Heavy, Extra Heavy).
6. CYCLE OPTIONS (Not all options are available on all cycles)
CLEAN WASHER
This washer has a special cycle that uses higher water volumes in combination
with affresh® Washer Cleaner or liquid chlorine bleach to clean the inside of
the washer.
CYCLE SIGNAL
Touch to turn the end of cycle signal on/off and adjust the tone volume when a
button is touched.
FABRIC SOFTENER
Touch “Fabric Softener” button twice to let the machine know when you have
added fabric softener to the appropriate dispenser.
DEEP FILL
Touch “Deep Water” button to add more water to the washer from the cycle’s
auto sensed level (Auto, Medium, High, Max Fill).
NOTE: Expect longer cycle times due to extended fill times when using the
Deep Water option.
DELAY START
Touch to delay the start of the wash cycle for up to 12 hours.
PREWASH
Touch to add a prewash period to any cycle to help loosen tough stains. The
washer will fill, pause to soak, and then begin the selected cycle (15 mins,
30 mins, 60 mins, 120 mins).
EXTRA RINSE
Touch to automatically add a second rinse available on most cycles.
DRAIN AND SPIN
This cycle uses a spin to shorten drying times for heavy fabrics or special-
care items washed by hand. Use this cycle to drain washer after canceling a
cycle or completing a cycle after a power failure.
NOTE: Touch EXTRA RINSE button after selecting the Drain & Spin to change
this cycle into a Rinse & Spin. A Rinse & Spin cycle combines a rinse and spin
for loads requiring an additional rinse cycle or to complete a load after
power interruption. Also use for loads that require rinsing only.
W11445526A
USING YOUR WASHER
WARNING
Fire Hazard
Never place items in the washer that are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking
oils).
Doing so can result in death, explosion, or fire.
1. SORT & LOAD LAUNDRY
See Loading Recommendation section below.
2. **ADD HE DETERGENT & LAUNDRY PRODUCTS TO DISPENSERS***
Dispenser Drawer
Remove inside tray for powder HE detergent.
Follow manufacturer’s instructions to determine amount of laundry products to use.
3. TOUCH POWER TO TURN ON THE WASHER
4. **SELECT THE DESIRED CYCLE FOR YOUR LOAD***
5. **ADJUST CYCLE SETTINGS, IF DESIRED***
6. **SELECT ADDITIONAL OPTIONS***
7. TOUCH AND HOLD START/PAUSE TO BEGIN CYCLE
*NOTE: Not all cycles, settings or options are available with all models.
LOADING RECOMMENDATION
For best performance, it is recommended to load items by dropping them in loose heaps evenly around the washplate and agitator. Do not lay items length- wise around the washplate or agitator.
RINSING BEFORE RUNNING A WASH CYCLE
Press faucet button
Water Faucet Operation
- Press the faucet button once to turn on and press again to turn off.
- Faucet will automatically shut off after 10 minutes or when max water level is reached.
- Water will automatically drain if water level becomes too high or if the lid is left open for 10 minutes.
MORE WATER WHEN YOU WANT IT
Max Fill,
High, Medium, Auto
Auto Sensing & Deep Water Wash
- The washer will adjust the water level to the optimal amount for a High Efficiency wash of the detected load size.
- Touch “DEEP FILL” to add more water to the wash load.
- There are four levels of deep fill “Auto”, “Medium”, “High”, “Max Fill”.
- Not all levels are available on all cycles.
- The washer dampens and moves the load, the level of the items will settle in the basket. This is normal, and does not indicate that more items should be added.
IMPORTANT: You will not see a washer basket full of water as with your past agitator-style washer. It is normal for some of the load to be above the water line.
2
CYCLE GUIDE
Your Kenmore washer has a unique user interface to help you select the best
cycle you need for your load. The “Load”, “Cycle” layout guides you to the
optimal cycle in two easy steps:
First determine what items are in the load that you are trying to wash. Use
that to guide your “Load” selection. Then determine how you want the washer to
wash them and select the appropriate “Cycle” selection. See chart below for
more details.
For best fabric care, choose the cycle that best fits the load being washed.
R – Recommended Cycle
a – Alternate Cycle
Blank – Cycle is available but not optimal
| How do you want to wash?
---|---
Cycle Selection
Normal| Wrinkle Control| Heavy Duty| Sanitize with Oxi|
Cold Clean| Express
Energy Conscious| Reduce Wrinkles| Powerful Soil Removal| Eliminate Bacteria*|
Energy Saving| Fast
What do you want to wash?| “Load” Cycle Selection| | | | | |
Cottons/Linens| Mixed| R| a| a| a| a| a
Mixed| R| a| a| a| a| a
Pajamas| R| a| a| a| a| a
Sweatshirts| R| a| a| a| a| a
T-Shirts| R| a| a| a| a| a
Athletic Wear| Colors| R| a| a| a| a|
Bright Colors| R| a| a| a| a| a
Business Casual| a| R| a| a| a| a
Casuals| a| R| a| a| a| a
Dark Colors| R| a| a| a| a| a
Dress Shirts/Pants| a| R| a| a| a| a
Jeans| R| a| a| a| a| a
No-Iron Fabrics| a| R| a| a| a| a
Baby Clothes| Whites| R| a| a| a| |
Handkerchiefs| R| a| a| a| | a
Napkins| R| a| a| a| | a
Socks| R| a| a| a| | a
Tablecloth| R| a| a| a| a| a
Undergarments| R| a| a| a| a| a
White Clothing| R| a| a| a| | a
White Shirts| R| a| a| a| | a
White Towels| R| a| a| a| | a
White T-Shirts| R| a| a| a| | a
Bras| Delicates| R| a| a| a| a| a
Delicates| R| a| a| a| a| a
Handwash Fabrics| R| a| a| a| a| a
Lingerie| R| a| a| a| a| a
Machine Wash Silks| R| a| a| a| a| a
Wool| R| a| a| a| a| a
Blankets| Bulky Items| R| a| a| a| a| a
Coats & Jackets| R| a| a| a| a| a
Comforters| R| a| a| a| | a
Machine Wash Curtains| R| a| a| a| a| a
Machine Wash Slip Covers| R| a| a| a| | a
Non-Rubber Lined Rugs & Mats| R| a| a| a| | a
Sheets| R| a| a| a| | a
Sleeping Bags| R| a| a| a| | a
Dish Cloths| Towels| R| a| a| a| | a
Terry Cloths| R| a| a| a| | a
Towels| R| a| a| a| | a
*Use this cycle to eliminate 99.9% of bacteria when used in conjunction with Oxi additives. Preset cycle settings must be used to achieve proper sanitization. Be sure to add an Oxi product to the basket before starting cycle.
3
WASHER ICONS
| Image | Description | Status |
|---|---|---|
| Door Locked | Alert State |
| Delay Start| On
| PreSoak| On
| Deep Water| On – Auto
| On – Auto Medium
| On – Auto High
| On – Max Fill
| Fabric Softener| On
| Extra Rinse| On
| Fabric Softener| Off
Image| Description| Status
---|---|---
| Extra Rinse| Off
| PreSoak| Off
| Favorite Cycle|
| Cycle Signal| Off
| Low
| Medium
| High
| Clean Washer|
|
Faucet| On
| Off
NOTE: Not all features and options are available on all models.
ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION
For detailed installation instructions and maintenance information, winter
storage and transportation, please see the INSTALLATION AND CARE INSTRUCTIONS
MANUAL included with your machine.
For information on any of the following items or if you have additional
questions, call our Customer Care Hotline at
1-844-553-6667.
REGISTER PRODUCT SCHEDULE SERVICE
HOW TO’S & FAQ MANUALS & DOWNLOADS
ADD SERVICE PLAN PARTS ACCESSORIES
Model &
Serial Number Tag location
4
NOTES
W11445526A ®/TM ©2020 All rights reserved. 03/20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>