motorola Audio Digital Baby Monitor with Rechargeable Battery User Guide
- June 7, 2024
- Motorola
Table of Contents
Motorola MBP11 Quick Start Guide
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your digital baby monitor
1.1 Baby unit power supply
- Insert the small plug of the power adapter into the side of the baby unit, as shown.
- Connect the other end of the power adapter to the mains socket.
1.2 Parent unit battery installation
- Turn the belt clip so that it is in the hanging position.
- Slide off the battery compartment cover.
- Insert the battery plug of the supplied battery pack into the battery jack inside the compartment, as shown.
- Reattach the battery compartment cover.
- Insert the small plug of the power adapter into the side of the parent unit.
- Connect the other end of the power adapter to the mains socket.
- The Charging Indicator comes on.
1.3 Belt clip on parent unit and baby unit
- On normal state, the belt clip can be hanged on the belt directly.
- Lift up the belt clip and rotate 180°, then the parent unit or baby unit could stand on the desk.
2. Basic operation of the keys
3. General information
If your product is not working properly…
- Read this Quick Start Guide or the User’s Guide.
- Visit our website: www.motorola.com
- Contact Customer Service at +49 (0) 1805 938 802 in Europe.
Email: motorola@telemarcom.eu
Manufactured, distributed or sold by Binatone Electronics International LTD.,
official licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and
are used under license. All other trademarks are the property of their
respective owners.
© 2011 Motorola Mobility, Inc. All rights reserved.
Version 1.0
Printed in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>