motorola Buds 600 ANC True Wireless Earbuds User Guide
- October 30, 2023
- Motorola
Table of Contents
motorola Buds 600 ANC True Wireless Earbuds
Product Information
The product has a maximum RF power of 8 dBm and is FCC ID: 2ARRB-MB600 IC: 20353-MB600 certified. The product comes with microphones for noise cancellation, multi-function buttons (MFB), LED indicators, infrared (IR) sensor, replaceable earcaps (size M), charging case charging contacts, microphones for phone calls, charging case, USB Type-C charging socket, earbud charging contacts, pairing button, and battery level indicator.
Product Usage Instructions
At a glance: The product has various components such as microphones, multi-function buttons, LED indicators, infrared (IR) sensor, replaceable earcaps (size M), charging case charging contacts, microphones for phone calls, charging case, USB Type-C charging socket, earbud charging contacts, pairing button, and battery level indicator. Refer to the user manual to identify each component.
Charge: Place the earbuds in the charging case and ensure the charging contacts are aligned. The LED indicators on the earbuds will light up when they are charging. Connect the USB Type-C charging socket to a power source to charge the charging case. The battery level indicator on the charging case will show the charging progress.
- Model No.: MOTO BUDS 600 ANC
- Frequency Band: 2.402 – 2.480GHz
- Working temperature: 0°C – 45°C
- Maximum RF power: 8 dBm
- FCC ID: 2ARRB-MB600
- IC: 20353-MB600
At a glance
- Microphones (for noise cancellation)
- Multi-function buttons (MFB)
- LED indicators
- Infrared (IR) sensor
- Replaceable earcaps (size M)
- Charging case charging contacts
- Microphones (for phone calls)
- Charging case
- USB Type-C charging socket
- Earbud charging contacts
- Pairing button
- Battery level indicator
Charge
Charging either with the supplied USB-C charging cable or a wireless charger (not supplied). The LED indicator flashes red when charging the battery. It turns solid blue when charging is complete.Put into the charging case and close the top lid. The pink/light blue* LEDs on both earbuds turn on until charging is complete.
Fully charge before use
The device can be powered through a USB-C from any CE-compliant power source
that implements the European interface as requested by EN 301 489-52.
On/Off/Pair
- Turn on earbuds: Turn on automatically when opening the charging case’s top lid.
- Turn off earbuds: Put both earbuds into the charging case and fully close the charging case’s top lid. Then earbuds turn off automatically.
- Pairing: MOTO BUDS 600 supports Google fast pairing. Open the charging case’s top lid. For Motorola smartphones or Android phones with Android version 6.0 or above, simply confirm MOTO BUDS 600 directly on your device screen. For other devices, select MOTO BUDS 600 from the Bluetooth menu of your device. Earbuds will do pairing automatically. In case of pairing to the 2nd smartphone, press and hold the pairing button on the charging case for 4 seconds.
Fit and comfort
- Choose the suitable earcap size.
- Fit into the earbuds.
- Insert the earbuds into ears and rotate to fit comfortably.
Operation
| Call | Button |
|---|---|
| Answer/End a call | Left/right MFB: Tap once |
| Reject a call | Left/right MFB: Press and hold for 2 seconds |
3-way call
Pick up calls/Put calls on hold/switch calls| Left/right MFB: Tap once
Reject calls/Continue the current call| Left/right MFB: Press and hold for 2
seconds
End the current call and resume on hold calls| Left/right MFB: Tap twice
Music
Play/Pause| Left/right MFB: Tap once
Previous track| Right MFB: Tap 3 times
Next track| Right MFB: Tap twice
Activate voice assistant
Siri, Google| Right MFB: Press and hold for 2 seconds
Active noise cancellation (ANC) / Ambient sound
Toggle between ANC on / ambient sound / ANC off| Left MFB: Tap twice
Multipoint connection
1. Connect to the 1st mobile device.
2. Switch off the Bluetooth function of the 1st device.
3. Switch on the Bluetooth function of the 2nd device and follow pairing instructions in section 3 to do pairing. When connected successfully, switch on the Bluetooth function of the 1st device. Two devices will be connected simultaneously.
Factory reset
1. Put both earbuds into the charging case.
2. Press and hold the pairing button on the charging case for 10 seconds. The LED indicator flashes blue and pink/light blue* 3 times.
3. Follow pairing instructions in section 3 to do pairing again.
LED status indicators
| Power on | Flash blue for 1 second |
|---|---|
| Power off | Pink/light blue* LED on for 2 s |
Pairing
| One of the earbuds flashes blue every 5 seconds and the other earbud flashes blue and pink/ light blue* alternatively.
In case only one earbud is powered on, it flashes blue and pink/light blue* alternatively.
Connected| Flashes blue every 5 seconds
Charging| Steady pink/light blue
Fully charged| Off
Incoming call/call waiting| Flashes blue every 1 second
Low battery level| Flashes pink/light blue every 5 s
Factory reset| Flashes blue and pink/light blue* 3 times
Note
Whether the LEDs on the earbuds are displayed in pink or light blue is
determined by the product colour you have purchased.For a full explanation of
all features and instructions, please download the user guide from
motorolasound.com.
Manufactured, distributed or sold by Meizhou Guo Wei Electronic Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2022 Motorola Mobility LLC. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>