AirVibes V40059W Pro Wireless Bluetooth Earbuds User Manual
- June 5, 2024
- AirVibes
Table of Contents
AirVibes V40059W Pro Wireless Bluetooth Earbuds
AirVibes Pro Earbuds
In the Box
AirVibes pro Truly Wireless Earphones With Charging Case
Micro USSB Charging Cable
Interchangeable Ear Tips
Take a Look
-
Ear Tip
-
Power/Action Button
-
LED Indicator Light & Microphone
-
Charging Port
-
Earphone Dock
-
Charging Case
-
Case Charging Port- (at the button)
Charging
- Charging
- (off)= Charged
- Charging
- Charged
(When the earphones are not in the charging box)
Press & hold both power buttons simultaneously for 2-3 Seconds2 -3
(When the earphones are in the charging box just take them out and they will
power on automatically)
Powering On/ Bluetooth Pairing
Once your earphones are powered on, the LED indicator lights will alternately
flash red and blue. After approximately 2-5 seconds, one of the earphone LED
indicator lights will flash blue while the other earphone indicator lights
will alternately flash red and blue. This means both earphones are paired
together.
(If both earphones do not paired together after 10 seconds, put them back into
the charging case, then take them out to let them pair with each other again )
Check your phone’s Bluetooth settings menu. Make sure that Bluetooth is turned
ON. Connect with the device listed as AirVibes Pro.
The LED Indicator lights of 2 earbuds will flash blue slowly.
Controlling Your Earphone
- One Click: Play/Pause/Answer Incoming Call/End Call
- Two Rapid Clicks: Activate Siri/Google Voice Assistants
- Hold 2-3 Seconds: Reject an Incoming Call
- Hold 3-4 Seconds: Power Off (When Not Receiving a Call)
Wearing your Earphones
Choose the Ear tip that is most comfortable for you.
FCC Statement
FCCID: 2ALCF-XO-9946 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
2020 Sakar International
195 Carter Drive,
Edison, NJ 08817
Keep Manual and All Relevant Information
for Future Reference
If You’re Having Trouble, We’re Here to Help!
To Obtain Warranty Service and Troubleshooting Information, Cal us 24/7 at
1-800-592-9541