Govee H7090 RGBIC Car LED Strip Lights User Manual

Govee H7090 RGBIC Car LED Strip Lights

Safety Instructions

Read and follow all the safety instructions

• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s life span.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
• Do not install the strip lights near any heat sources.
• Do not allow children to install the strip lights alone.

Introduction

Thank you for choosing Govee RGBIC LED Interior Car Lights. This product is an interior car light and supports app control.RGBIC is Govee’s latest lighting display technology. With its advanced IC chips (independent control), each strip light segment can be adjusted independently, creating vibrant rainbow effects.

What You Get

At a Glance

Installing Your Device

Before You Install

1. Unpack the box and check all items listed in the packing list.
2. Power on the strip light and check whether it lights up.

Installing Steps

1. ipe the surface to keep it clean and dry.
2. Install the cigarette lighter and control box in the central console.
3. Peel off the protective film and stick the strip lights as indicated in the picture.
4. Firmly press the strip from end to end and reinforce ends of the strip with zip ties and screws.
5. Insert the cigarette lighter into the outlet and press the button on it. The button will light on, indicating the strip light is powered on.

Pairing Your Device with the Govee Home App

What You Need

• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing Instructions

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on Bluetooth on your smartphone.
3. Open the app, tap the”+” icon in the top right corner and search for “H7090”.
4. ap the device icon and follow the on-screen instructions to complete pairing.

Specifications

Troubleshooting

1. The adhesive tape is not strong enough.
   • Make sure the installation surface is clean and dry.
   • Firmly press over the strip after sticking.
   • Reinforce the installation with more clips and tape.
2. Cannot connect to Bluetooth.
   • Do not skip the Bluetooth connection in the app.
   • Ensure Bluetooth on your smartphone has been turned on.
   • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
   • Power the strip lights and your smartphone Bluetooth off then on, then try again.
   • Ensure that your smartphone is within 1 m/3.28ft of the strip lights when connecting.
   • Clear any obstructions that are between the strip lights and your smartphone.
3. The strip lights do not display the full selected color/Some LED beads do not light up.
   • Please contact the Govee support team for rapid product replacement.
4. Cannot sync the strip lights to the beat of my music.
   • Move the control box closer to the music source.
   • Clean the mic on the control box then try again.
5. The LED strip doesn’t turn on.
   • Please make sure the cigarette lighter is well connected to the power plug.
   • There is a button on the cigarette lighter. Please make sure it is pressed and turns red. It is indicated that the strip lights are powered.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: [email protected]
• Official Website: www.govee.com
• @govee.official 
• @Govee.smarthome

Compliance Information

EU Compliance Statement
Shenzhen lntellirocks Tech Co. Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.govee.com/

EU contact address
BellaCocool GmbH E-mail: [email protected]

UK Compliance Statement
Shenzhen Intellirocks Tech. Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 A copy of the UK Declaration of Conformity is available online at www.govee.com/

Bluetooth

• Frequency 2.4GHz
• Maximum Power <10dBm

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collection points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. Non-replaceable light source. Not intended for illumination. Only used for creating ambiance.

1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
2. Do not use the rope light when covered or recessed into a surface;
3. Do not open or cut the rope light;

The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license. Govee is a trademark of Shenzhen lntellirocks Tech Co., Ltd. Copyright ©2021 Shenzhen lntellirocks Tech Co., Ltd. All Rights Reserved.\

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>