motorola VM75 Nursery Video Baby Monitor User Guide
- May 15, 2024
- Motorola
Table of Contents
5.0” VIDEO BABY MONITOR
MODEL: VM75, VM75-2, VM75-3 AND VM75-4
Quick start guide
VM75 Nursery Video Baby Monitor
Frequency band: 1880MHz to 1900MHz
Max. transmitted power: < 24dBm
Important Notes:
- When charging the batteries for the first time, charge for at least 16 hours continuously.
- Be aware that this Digital Video Baby Monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision.
Welcome
This booklet provides you the quick start information of your VM75.
For a full explanation of all features, download the user guide from
motorolanursery.com.
Contents inside the box
- Baby unit
- Parent unit (with built-in Lithium battery)
- Power adaptors x 2
- Quick Start Guide
In multi-camera packs, you will find one or more additional baby units with power adapter units.
At a glance
3.1 Baby unit
1. Camera Lens
2. Microphone
3. Power indicator
Lights up in blue when the Baby Unit is switched on and linked to the Parent
Unit.
Automatically Off during night mode.
4. Light Sensor (Night Vision Mode)| 5. Pairing Key
Press and hold to pair with the Parent Unit.
6. Power Adapter Socket
7. Temperature Sensor
8. Power ON/OFF switch
Slide to switch the Baby Unit on or off.
---|---
3.2 Parent unit
-
Display (LCD screen)
-
Battery status, Power, Sound level and Pairing indicators
• Lights up in purple when the Parent Unit’s battery is being charged, it turns blue when the battery is fully charged.
• Lights up in green when the Parent Unit is switched on.
• Green-Orange-Red-Red.
Show the sound level detected by the Baby Unit – the louder the sound detected, the more LEDs light up. Flashes rapidly in green when the Parent Unit is searching for the Baby Unit, or is in pairing mode. -
Main menu button
Press to enter/exit menu mode. -
OK / button
When in a menu, press to choose an item, or save a setting.
Press to enter remote scan mode. -
Control key panel
• UP / VOLUME+▲
Press to increase speaker volume in camera viewing mode.
When in a menu, press to scroll up.
When in remote scan mode, press to tilt up.
• DOWN / VOLUME-▼
Press to decrease speaker volume in camera viewing mode.
When in a menu, press to scroll down.
When in remote scan mode, press to tilt down.
• LEFT ◀
Decrease brightness in camera viewing mode.
When in a menu, press to scroll left.
When in remote scan mode, press to pan left.
• RIGHT ▶
Increase brightness in camera viewing mode.
When in a menu, press to scroll right.
When in remote scan mode, press to pan right. -
TALK BACK
Hold down to talk back to the baby unit. -
Power button
Press and hold to switch the unit On/Off. Press to turn the video screen Off/ On. When the video screen is off, it turns on automatically when sound is detected. -
Power socket
3.3 Parent unit display icons
| Signal StrengthSpeaker on / off| | Screen brightness
---|---|---|---
| AC power mode| | Speaker volume
| Speaker on / off| | Video on time
| Lullabies menu / mode| | Add camera
| Zoom menu / mode| | Delete camera
| Night vision| | View camera
| Alarm timer| | Talk back function
| Battery status| |
Camera Patrol Mode
Camera Identification Number
Connect and charge
WARNING
- Do not remove the tags from the AC Adapters. Only use the AC adapters provided.
- Strangulation Hazard. Children have STRANGLED in cords. Keep adapter cords out of the reach of children (more than 1 metre away). Never use extension cords with AC adapters. Only use the AC adapters provided.
4.1 Connecting the Power Supply for Baby Unit
- Place the baby unit near a electrical outlet in the room where you’re going to be monitoring your baby most of the time. It should also be at least 3 feet away from your baby.
- Plug the DC plug of power adapter into the baby unit, connect other end to a suitable electrical outlet.
- Slide the power button on the side of the baby unit up to turn it on.
4.2 Connecting the Power Supply for Parnet Unit
- Plug the DC plug of power adapter(DC5V/1000mA) into the Parent unit, connect the other end to a suitable electrical outlet.
- Leave to charge for 16 hours.
Note
The first time you use the Parent unit, or if you haven’t used it for a long
time, it will take 16 hours to fully charge.
The battery life on a single charge lasts for 4 hours. We recommend you keep
the cable plugged into the mains power socket if you’re going to use for
longer than this or throughout the night.
When the battery gets very low, it’ll take about 30 minutes to charge enough
for you to use it for a short time. To charge the Parent unit in the shortest
amount of time, turn it off while it’s charging.
- After the Parent unit has charged for 16 hours you can switch it on.
- Before you do, move the Parent unit at least 3 feet from the Baby unit. Any closer and you might get audio feedback sounds.
- Press and hold the button to turn the monitor unit on, the monitor unit and camera unit are automatically linked and ready to use.
CE Declaration
This product is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU.
UK Declaration of Conformity
Hereby, MZGW declares that this product is in compliance with the requirements
for UKCA marking.
The CE and UK Declaration of Conformity can be obtained at
motorolanursery.com.
Imported and Distributed by
A.I.&E., Adriaan Mulderweg 9-11, 5657 EM Eindhoven, The Netherlands.
Edco UK Ltd, 1st Floor, Two Chamberlain Square, Birmingham, B3 3AX, UK.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD.,
official licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and
are used under license. All other trademarks are the property of their
respective owners. © 2023 Motorola Mobility LLC. All rights reserved.
Version 1.3 (EU)
Printed in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>