MAK CODING Mercedes NTG5.5 Apple CarPlay and Android Auto Activation User Guide

MAK CODING Mercedes NTG5.5 Apple CarPlay and Android Auto Activation

Product Information

The product is the NTG5.5, which includes the following items:

• Interface
• Power Cable
• LVDS cable
• USB cable
• 2x Antenna

Product Usage Instructions

Product Button description and usage instructions

• Push the knob to the left for 30 seconds to activate the knob’s
  previous/next song function after the system restarts.

• Wake up Siri: Answer the call.

• Wake up Siri (Need to be set): Control CarPlay volume.

• Left and right knob function: Return.

• Control CarPlay volume: Return.

• Mute: Long press to switch CarPlay/original car system; Short press to hang up.

• Push right for next song, push left for previous song.

Product Modified wiring specifications

Connect the components as shown in the wiring diagram:

• Bluetooth antenna
• WiFi antenna
• Connect the head unit of the original car (unplug LVDS cable)
• Connect the USB cable
• Video Output
• Connect the microphone (support the original car microphone, may not be connected)
• BACK-CAR CCD 12V ACC Detection cable
• Connect the head unit of the original car (unplug power cord)

Product Wireless CarPlay connection

1. Select AUX in the media interface of the original car system.
2. If there is an optical fiber cable (usually green or orange) on the original car power cable, take out the optical fiber cable and connect it to both the main line of CarPlay.
3. Long press the on-hook button on the steering wheel to switch the system.
4. Connect the mobile phone to the CarPlay Bluetooth interface to use (enter the Bluetooth interface in the CarPlay system to view the CarPlay Bluetooth name).

Note: The product also includes additional features such as video, AV in, and settings. Please refer to the user manual for more information on these features.

Car MIC: 1H 2L

• External MIC: 1L2H

Product List

1. Interface
2. Power Cable
3. LVDS cable
4. USB cable
5. 2x Antenna

Button description and usage instructions

• Push the knob to the left for 30 seconds, activate the knob previous/next song function after the system restarts.

Modified wiring specifications

Before installation, please remove 1 Center control panel, 2 co-pilot baseboard (you can place modules here), as shown below:

Wiring diagram

Note that if there is an optical fiber cable (usually green or orange) on the original car power cable, you need to take out the optical fiber cable and transfer it to the main line of CarPlay.

Wireless CarPlay connection

• Select AUX in the media interface of the original car system.
• Long press the on-hook button on the steering wheel to switch the system.
• Connect the mobile phone to the CarPlay Bluetooth interface to use (enter the Bluetooth interface in the CarPlay system to view the CarPlay Bluetooth name).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>