YESKAMO Wireless CCTV Camera Indoor IP Camera FHD Home WIFI User Manual

YESKAMO Wireless CCTV Camera Indoor IP

 **Camera FHD Home WIFI User Manual**

I. Device Overview

1. Light Sensor: plug the camera, the red light will turn on, and be off in a minute.
2. Lens: 3.6mm, 2MP/3MP
3. IR Light: auto switch at night
4. Microphone: pick up audio
5. Loudspeaker: transmit sound
6. RJ45: Ethernet port, hard wire camera with router
7. Reset Button: Press and hold the reset button for about 10-12 seconds to restore the camera to the factory setting
8. Power input: connect with provided 5V 1.5A plug for power supply
9. SD Card Slot: Insert SD card (The package doesn’t include) for video storage. Support max 128G, in FAT32 format. Please turn off the device when insert or remove a card.

II. Connection Guide

1. Wireless Connect Camera

Tips:

• Download the MIPC APP on iOS or Android mobile/iPad
• Always makes sure that your camera has the latest firmware as listed on the MIPC app.
• Before connecting to your camera, please confirm your home Wi-Fi network is 2.4Ghz, and the camera is less than 10 meters away from the router.
• Meanwhile, the camera and your phone should be connected to the same WIFI.

Step 1: Download app and register new account
Scan the QR code or search “MICP” in App Store or Google play, and download the APP.

http://www.mipcm.com/download

Step 2: Add ID on the phone app
Connect the camera to the power source, the red light will turn on. (when the red light turn off, you will get a “tick” sound)

(1) Tap “+” in the upper left corner

(2) Select the PTZ Camera type.

(3) Scan the QR code which is on the bottom of the camera Manually add ID and password (admin)to enter the “add a new device” screen.

Step 3: Wi-Fi Setup for camera

(4) Select WIFI connection.

(5) Press the reset button for about 1-2 seconds, you will hear the voice that starts receiving wireless configuration.
NOTE: Long press for 10-12 seconds restores the factory setting

(6) Input WIFI password.

(7) WIFI Connection (it will take about 1 minute to connect)

(8) Change password, (Never use the default password for your camera. Always ensure that your password is at least 8 characters long and contains a combination of lowercase characters, uppercase characters as well as numbers.NO no special characters).

(9) Now you can enjoy the real-time preview.

2. Wired Connect Camera (Option) The most stable way to connect the camera

1 Select Ethernet. Connect the camera to the router through a network cable.

2 Change Password

( Never use the default password for your camera. Password is at least 8 characters long and contains a combination of lowercase characters, uppercase characters as well as numbers. NO special character ).

3 Input WIFI password.

4 Now you can enjoy the real-time preview.

III. Operation on Device Interface

1. Playback
Calendar: This panel allows users to select the date that would like to playback. And here you can check all the snapshots and video notifications.

2. Device Settings

3. Resolution

This allows users to change the resolution of the live video watching. There are four choices: HD1080P/3MP, Standard, Smooth, Auto.

4. Record, Speaker, and Sensitivity

Selection 1:
This icon allows users to record videos manually. The video will be saved in the Account Settings-My documents.

Selection 2:
Press and hold the microphone. talk loudly and then you can hear the voice from the camera side. Note: Guest users will not have the right to use this feature.

Selection 3:
Click this button to enable or disable audio output from the camera. This feature allows the user to listen to the audio from the camera side.

Selection 4:
This button is for image adjustment, which allows the user to adjust brightness, contrast, saturation, sharpness, and camera mode.

5. About Cloud Storage
Our camera supports a cloud storage service, but it is a paid service. You can pay for this service in the App if you need it.
Note: If you’d like to buy a cloud storage service, please notice that the payment couldn’t be canceled, and the payment is paid for by the cloud service company. We suggest that you can have a trial order for the cloud service before you decide to buy for a long time.

6. Function of PTZ
Pan-Tilt-Zoom
The PTZ allows users to change the direction of the camera. With this feature, users can control the camera to left, right, up, and down. These controls are only available as slipping your fingers to the left, right, up, and down. When you double click or move two touching fingers apart on the phone screen, the user can zoom in on the picture. Instead, users can zoom out the picture.

IV. Camera Installation

The camera comes with a mounting bracket and screw packages for use in mounting the camera onto a stable surface. Note: Before installation, please ensure that the installation environment can support at least a triple weight of the camera.

(1)  You can put it on any flat place: table, wall, floor, etc. Fix the bracket to the wall with screws

(2) Attach part of the camera back to bracket and installation finished.

(3) Easily to take the camera off or adjust the install angle

V. Statement

Thank you for purchasing YESKAMO Wireless Security Camera!

1. Though we apply all efforts to make the manual complete and accurate, there could still be some discrepancies due to the products’ timely updates.
2. The content in this manual is only for users’ reference. We don’t promise it’s exactly the same as the products you purchase. Detailed information is in accordance with the final products.

VI. Safety Caution

1. Please read the manual carefully and operate the camera under the instructions.
2. Please do not transform or modify the product, do not open the case, or disassemble the product.
3. Please use the product under its standard working temperature and humidity.
4. Please test before installation. Do not apply power to the camera before completing installation. Do not place objects on top of the camera.
5. Avoid mud, sand, water, drops, bumps, etc., Also, avoid setting up the device in that environment and condition as it can lead to failures or damage. Conditions of Fire, earthquake, lightning, wind and flood damage, other disasters, or external factors (such as pollution or voltage disturbances) that could cause malfunction or damage, do not use this product.
6. Malfunctions or damages due to bracket failures (storage in hot and humid places, battery leakage, etc.) or improper protection. We assume no responsibility.

VII. Product Specification

IX. FAQ

Q1: How to get motion detection notification?
A: This camera only supports motion detection.

1. On the phone setting, please check that if the MIPC app enabled notification.
2. On the app device setting, click “notification”-choose “motion detection”-enable alarm- click + -customize time and day-click “ok”- save the setting

Q2: How to set up the camera sound?
A: Enter camera setting- “sound”-and then you can adjust Speaker and Mic Volume.
Q3: How to view the camera on the computer?
A: Please download and install the software: http://www.mipcm.com/download

Q4: What if you could not connect your camera with Wi-Fi successfully?
A: Please confirm:
1)Your home Wi-Fi network is 2.4G. Our camera does not support a 5G Wi-Fi network. Please check your Wi-Fi Frequency band of the Wi-Fi router, or search its brand and model on Google.
2)If your router is dual-band, please choose 2.4G Wi-Fi to connect your phone and the camera. Please put this Wi-Fi camera closer to the router.
3)Please check if the Wi-Fi router is operating properly first, then turn on the DHCP of the router, and set up WAP2-PSK for security recognized by the camera.
4)When you hear the voice “failed to configure wireless information, please reset”, please reset the camera again and connect it.

Q5: What if you forget the camera password?
A: Please reset the camera firstly. Long press the reset button for about 10-12 seconds on the camera. The password will be changed to the default password.

Q6: What if the camera shows offline?
A: Please reboot the camera and wait for the infrared led turns off, it will show the video. If not, delete the camera and re-connect the camera again.

Q7: What If the camera network connection breaks off after changing the network provider or router?
A: Please Long press the reset button to restore the factory setting and reconnect it.

Q8: What If the camera can’t record normally?
A: Please check your storage device.

1. Please check the SD card status on your camera. If you have inserted it into the camera, but nothing is showing on the SD card. Please turn off the camera and re-inserted it again.
2. Email us directly to get support if the camera still could not record. Email: usservice@yeskamo.com (US) ukservice@yeskamo.com (UK)

Q9: How can I watch the video stored on the SD card on the computer?
A: You need to download the tool on www.mipcm.com and install it on your PC.

Q10. Why Two-way audio can not work?
A:

1. check if you turn on the sound. When using the dual-way audio, please turn up the volume of the camera and smartphone.
2. Confirm that the app has permission to access the microphone (above all, please make sure your phone isn’t on silent mode) if you are still not able to use the dual-way audio after these steps, please reboot or reset the camera and restart it again.
3. The two-way audio does not support speaking on a headset and hearing sound simultaneously.

Q11. I can view the camera at home but not on my mobile network when I am outside. What should I do?
A:

1. Download the latest App.
   2)Confirm that the smartphone network is working normally.
   3)Confirm that the camera is connected to the network.
   4)Check the phone setting interface and confirm that the app has permission to access the WIFI and mobile data.
   5)Unplug and plug the camera.

Q12. Why the PTZ function lags when I am using my mobile network?
The limitations of the mobile network and the camera network lead to slow data transmission. Please change the image quality from 3MP to standard or other resolution when using the mobile network.

X. Support

For access to get our customer support, please contact our email. www.yeskamo.com

Email: usservice@yeskamo.com (US)
ukservice@yeskamo.com (UK)

Cell: +1 830 745 5888 (US)
+44 20 3807 4763 (UK)

Made in China

http://www.yeskamo.com/

Email:
usservice@yeskamo.com (US)
ukservice@yeskamo.com (UK)

Cell:

+1 830 745 5888 (US)
+44 20 3807 4763 (UK)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>