YESKAMO Floodlights cameras with NVR-1225 User Guide

YESKAMO Floodlights cameras with NVR-1225 User Guide

Statement

1. Thanks for purchasing this product. YESKAMO is committed to providing our customers with reliable security solution and protect your property all times.
2. This is the fast setup guide which only helps you familiar with this product quicker, for more information about product, please refer to the full user manual
3. Though we apply all efforts to make the manual complete and accurate, there could still be some discrepancies due to products’ timely update. Detailed information is in accordance with the final products.

Safety Caution

1. Wireless only means no any cables between camera and NVR base, but the whole camera
   system need to be plugged into power socket for power supply

2. Please use the included power supply with the product to prevent damage to the product
   Please avoid any avoidable obstacles and electromagnetic product between camera and
   NVR for better signal

3. All man-made damages are outside the scope of free warranty

Technical Support

Website: www.yeskamo.com
Email: [email protected] (for US)
[email protected] (for UK)
US Cell: +1 830 745 5888
UK Cell: +44 20 3807 4763

1. Product Introduction

Wifi Floodlight Security Camera

1. Microphone: Pick up audio

2. 4pcs Floodlight: will turn on automatically in the darkness when PIR sensor was triggered

3. 4pcs IR led: IR leds will automatically switch on at darkness for night vision

4. Speaker: transmit sound

5. 3dBi Antenna: receives wifi signal from NVR recorder

6. Weatherproof IP66 Housing: working temperature: -20℃/-4℉ to 60℃/140℉

7. IR Cut Filter: auto switch day/night

8. PIR Sensor: detect objects in the monitoring area

9. TF Card Slot: Insert TF Card for video storage. (Max support 128G TF Card, TF card must be FAT32 format)

10. Reset button: Press and hold reset button about 5-10 seconds to restore camera to
    factory setting.

11. 2-Axis Mounting Bracket: adjust installation angle and vandal-proof inside cable 360° all-round swiveling and 90° up-down adjusting

12. Power-in Port: connect with provided 12V 1A plug for power supply

13. RJ45 Ethernet port:
    A: pair / match code camera with NVR when camera lose connection
    B: hard wire camera with NVR or router to get stable signal (DO NOT CUT IT OFF)

Network Video Recorder (Abbreviated as NVR)

1. VGA video output: connect NVR to VGA input port of your TV/monitor for video and
   audio output (VGA cable not included)

2. HDMI video output: connect NVR to HDMI input port of your TV/monitor (HDMI cable not included)

3. WAN Port:
   A: connect to router with Ethernet cable for remote viewing
   B: When you add new camera to YESKAMO NVR recorder, or your camera lose
   connection with NVR recorder, you need this Ethernet port to pair camera with NVR
   recorder

4. USB port: for USB mouse control, USB flash drive port for video footage backup and
   system upgrading

5. Power Input: Connect the provided 12V 2A/3A adapter for power supply

6. Antenna: Release strong wireless signal from NVR recorder

7. Power Indicator: Light on when NVR has power supply

8. HDD indicator: light on when hard drive is recording

2. Connection Instruction

(Model No.: TJ06-10804-2TB)

1. Plug camera to power socket with provided 12V 1A adapter
2. Plug NVR to power socket with provided 12V 2A/3A adapter
3. Plug mouse to NVR
4. Connect NVR recorder to TV/Monitor with HDMI/VGA cable (Not included)
5. Use Ethernet cable to connect the WAN port of NVR to LAN port of router, make the system online if you want to remotely view the cameras on phone app (Skip it if you only want to view local videos on monitor)

User name: admin
Password: No password (Default password is no password, let it blank and click “Ok” to
login the camera system)

Note:

1. The laptop can’t be used as monitor directly, please use your TV or desktop’s monitor for
   local viewing

2. The NVR recorder has a built in router and the cameras receive the wireless signal from
   the NVR. So it is suggested to place the NVR at the center of monitoring area and avoid any avoidable obstacle between the cameras and the NVR and keep the antenna of camera
   parallel with NVR’s antenna

3. What if my TV does not display the image of camera?

The default output resolution for NVR recorder is 1280×1024, which may not be compatible with some screens and it will be black on the monitor. Please adjust the resolution of
system to match your monitor as below steps:

1. Connect the NVR to any other screen via VGA cable to enter the system; (or you may also try any other screen via HDMI to see if you can enter the NVR system).

2. Once you are able to login/access the NVR system, click right mouse button to enter
   main menu > system setup >general setup > display resolution > 1080P@60Hz, apply to save it

3. Connect the NVR to your primary monitor via HDMI/VGA cable. You should have it
   worked with the primary screen.

NVR optional output resolution: 1024×768, 1280×1024, 1366×768, 1440×900, 1080P@50Hz,
1080P@60Hz (change the output resolution to match your primary monitor)

4. Remotely view the cameras on the phone

1. Make sure the NVR monitor is ONLINE status:
Connect the WAN port of NVR monitor to LAN port of router with Ethernet cable, then the
NVR monitor will be ONLINE.
Right click the mouse to enter main menu > Fast Network > Cloud (P2P) > ONLINE

2) Download free app
Search free APP “YESKAMO” , “EseeCloud” in App store or Google play.The phone app will
be updated some times, if your phone app menu is different from the menu in user manual, please contact us to get the latest user manual.

3) Create an account and log in phone app
Register an account with your email address /phone number and password. A verification
code will be send via text.

4) Add Cloud ID:
A: Enter APP >Enter APP > click “+” in the right top corner or center of the phone > Scan the Clould ID
B: Enter APP > click “+” in the right top corner or center of the **phone

“Other ways to
add” > Input “ Device Cloud ID ”> the default password is no password, click “Add” and
“Complete”to finish
—Cloud ID:
A: Right click the mouse to enter main menu > Fast network> Cloud (P2P)**
B: Right bottom corner of the monitor
C: The label on the NVR/Monitor
—Name of device: customize the system name (such as home, office, room…)
—User Name: default is admin (the same as your NVR monitor)
—Password: default is no password, leave it blank/empty (same as your NVR monitor system)

5) Remotely view camera via phone:
Double tap the screen, and you can view camera anywhere any time.

6) Two way audio communication

Note:
Only one user can use the “microphone” at one me, others can use the microphone when
the first person hangs up.

5. How to enable the Siren Alarm from camera side?

There are 4 types of PIR activated alert available, Buzzer, Email, phone app notification and
IPC Alarm. You can customize the PIR activated alerts based on your requirement.

Buzzer: NVR monitor will beep when motion is detected
Email alert: you will receive an email alert(refer to “full manual user”)
Phone app notification: you will get a phone app notification push
IPC Alarm: you will hear siren alarm from camera side

Take IPC alarm as an example, it sounds an siren alarm from camera side when PIR is activated.

Right click mouse to enter main menu> system setup> channel setup> video detection> select channel and click “Enable” > check/enable “IPC Alarm” > Click “Apply” to save the
setting.

Note:

1. If you choose phone app or email alert for this camera, please make sure your camera system is online.
2. If you want to setup the same alerts for all channels, please repeat above steps or click “Copy to all”.

6. How to manually turn off the floodlight at night?

This floodlight camera has a built in PIR sensor and floodlights. The floodlight will automatically switch on at night when detect any suspicious activities and offer true color videos. But you can customize the IR-Cut mode to turn off the floodlight as below steps:

Before customizing the IR-Cut mode for a selected channel, please double click the selected channel to enter full screen mode.

Right click mouse to enter main menu > color adjustment> IR-Cut mode: Infrared, Daylight,
Night, Full Color, Smart Mode

Note:
A: The light of floodlight camera lasts for about 20 seconds.
B: The time interval for floodlight is about 2 minutes.
C: Only under the “Full color” mode and “Smart” mode, the floodlight will turn on at night.

7. How to add a new camera to YESKAMO NVR recorder?

The cameras are paired with NVR recorder before packed and it will auto pair with NVR after you plug whole camera system to power socket, but if the camera lost connection with NVR recorder accidentally or you want to add a new camera to this kit, please pair/ match code the camera with NVR as below steps:

1. Take the camera near NVR recorder

2. Plug camera to power outlet via the provided 12V 1A power adapter

3. Use Ethernet cable (RJ45) to connect camera with NVR recorder, the WAN indicator light
   at back panel of NVR will turn on  

4. Right click mouse to enter main menu > video manage
   The upper box shows information of camera, and lower box shows channel information of NVR

5. If the channel status at lower box shows “IPC disconnect”, “connect fail”, “ different
   segment” …, select that channel with mouse, then click “delete” and the status of that
   channel will be “No video source”

6. Click “Search” in the upper box, new IP address will pop up in minute and then click
   “match code”

7. The camera will be connecting with NVR and “Wifi add” interface will pop up

8. Click “ Exit” until the camera’s IP address pops up for that channel. (The IP address will be
   172.20.14.xx)

9. The picture of camera will be shown on monitor and the status of that channel will be
   “connect success” on video manage interface

10. Then you can disconnect the Ethernet cable and install the camera at anywhere you want (Camera should be install within the NVR’s wifi range, and Connect the Ethernet cable back to router with NVR if need remote view )

This is a Quick User Guide, please refer to the full user manual for more detailed information

Read More About This Manual & Download PDF:

References

• Welcome Home - YESKAMO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>