PENDEJATO 009DC Portable Bidet Attachment for Toilet Instruction Manual
- June 14, 2024
- PENDEJATO
Table of Contents
PENDEJATO 009DC Portable Bidet Attachment for Toilet Instruction Manual
Assembly Instruction
WARNING! PLEASE PLACE ALL THE PRODUCTS AT ROOM TEMPERATURE AND DO NOT STORAGE THE BIDETS AND ITS ACCESSORIES IN THE FREEZING TEMPERATURE ENVIRONMENT UNDER 0 DEGREE CELSIUS!
NAMES AND FUNCTIONS OF ACCESSORIES
Accessories
-
Non-slip mat(2)
-
Circular mounting brackets(2)
-
Flexible hose 80CM – 9/16 * 9/16
-
Adapter 1pcs G1/2 9/16 G1/2
Installation Tools Needed (Not included
-
Wrench
-
Teflon tape
-
Screwdriver(flat)
INSTALLATION
PREPARATION
A. Remove the existing toilet seat .
B. Turn off the water valve.
C. Flush toilet to drain tank completely
D. Take out exiting water pipe
Installation
(please choose a suitable installation)
-
Water valve
-
Toilet tank water inlet
-
Washbowl
INSTALL RUBBER NON-SLIP MATS AND CIRCULAR MOUNTING BRACKETS INTO
BIDET,AND INSTALL IT ON TOILET ADJUST IT IN SUITABLE POSITION
Insert the rubber non-slip mats to the bottom of the bidet and place the circular mounting brackets into the bidet attachment.
FINAL ASSEMBLED FIGURE
TRYING FOR THE FIRST TIME
Congratulations! You are ready to use for the first time.
Adjust the function selection and water pressure control knob, choose the comfortable pressure you want.
Note: function selection and water pressure control knob couldn’t reset automatically, please turn it off manually
TROUBLE SHOOTING
Twin Nozzle system
If your spray outlet hole is clogged for some reason, simply try to move spray outlet up and down for a few times manually.
HELPFUL TIP:
Over tightening can cause damage to the threads and result in water leakage.
Use only hand pressure first and check for any leakage. Turn only less than
quarter turn at a time making sure there is no leakage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>