kogan 23L Thermomelectric Wine Chiller User Guide

23L Thermoelectric Wine Chiller
KATHM8WNCHL
Quick Start Guide

Safety Instructions

Please read carefully and follow all safety rules and instructions.

• WARNING: risk of child entrapment.
  Junked or abandoned appliances are dangerous, even if they “just sit in the garage a few days.”

• Before you throw away your old wine cooler: take the door off, leaving the shelves in place so that children may not climb inside easily.

• Never allow children to operate, play with or crawl inside the appliance.

•  Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

• Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

•  Do not store food in the wine cooler, as interior temperature may not get cool enough to prevent spoilage.

• This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

WARNING: please do not use where children can touch the unit, nor let children use the unit by themselves.

Attention

Please handle this product with care and inspect it regularly to ensure it is in good working order.
If the product, power supply cord, or plug shows any signs of damage: stop use, unplug, and contact Kogan.com/support

Technical Data

Product Layout

down key

Installation Instructions

• Remove the exterior and interior packing
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Put on the space holder inside the manual bag, it helps to keep space between the machine and the wall to make it proper air ventilation  Clean the interior surface with lukewarm water using a soft cloth.
•  Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level your appliance, adjust the front legs at the bottom of the appliance.
•  Install away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold or hot ambient temperatures may also cause the appliances not to perform properly.
• Not designed for placement in a basement.
•  The appliance is for indoor use only.

Operating your Wine Cooler

It is recommended that you install the wine cooler in a location where the ambient temperature is between 10- 26. If the ambient temperature is above or ℃ below recommended temperatures, the performance of the unit may be affected. For example, placing in extreme cold or hot conditions may cause the interior temperature to fluctuate. The range of 7-18°C may not be reached. The temperature may fluctuate depending on whether or not the interior light is on or off or whether the bottles are located on the upper, middle or lower section.

How to set the temperature

There are three touch-buttons on the control panel

•  “▲” and “▼” increases or decreases the set temperature by 1°C (temp range is 7-18°C).

•  “ ”button turns on or off the interior light.
  Note:

• This product is designed for maximum cooling of 18 below ambient ℃ temperature.

• When the ambient temperature is around 25°C or less, the unit can maintain a temperature range between 7-18°C.

Care & Maintenance

Cleaning your wine cooler

•  Unplug the wine cooler and remove the bottles.

•  Wash the inside with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to one liter of water.

• The outside of the wine cooler should be cleaned with a mild detergent
  and warm water.

•  Draw out the water box at the bottom, and wash.

Moving your wine cooler

•  Remove all bottles.
•  Securely tape down all loose items inside your wine cooler.
•  Turn the leveling legs up to the base to avoid damage.
•  Tape the door.
•  Be sure the wine refrigerator stays in the upright position during transportation.

Troubleshooting

that the circuit breaker hasn’t been tripped in your meter box.
Wine cooler is not cold enough.| Check the temperature control setting.
External environment may require a higher setting.
The door is being opened too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct clearance around it.
The light does not work.| Contact the Kogan customer support team.
The cooler is vibrating during use.| Check to assure that the wine cooler is level.
The wine cooler seems to make too much noise.| The wine cooler is not level.

Check the fan.

The door will not close properly.| The wine cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves are out of position.
LED does not display.| Main control board does not work.
There is some problem with the plug.
Contact the Kogan customer support team.
LED display error.| Weak quality of display.
Contact the Kogan customer support team.
Buttons are not functional.| The temperature control panel is damaged.
Door does not close tightly| Check the door seal if it is in the proper position.
Check if the wine bottles are placed in their correct positions.
Weak magnetic door seal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>