rotronic RMS-GW-868 Monitoring System Instruction Manual
- June 6, 2024
- ROTRONIC
Table of Contents
RMS-GW-868/915
Short Instruction Manual
GENERAL DESCRIPTION
Congratulations on your new RMS gateway. The gateway transmits the data of the wireless data loggers continuously to the RMS software by Ethernet. These short instructions describe the main functions of the device.
https://rotronic.live/RMS-GW-868
Please read this short manual and the instruction manual on www.rotronic.com/rms carefully.
COMMISSIONING
The device must be supplied with 24 V (terminals: V+ / V-) or via PoE to be
able to transmit data. The gateway can be mounted easily with the wall
bracket. The device is connected to the RMS software by pairing.
Cloud integration
Integration of LAN devices into the Rotronic Public Cloud requires for the
local network Port 80 to be enabled and a DHCP server must assign an IP
address to the LAN device. For all other integrations, please check the online
manual.
INTEGRATION OF THE GATEWAY (PAIRING) IN 6 STEPS
-
If you do not want to connect the device to the Rotronic Cloud, the server must be configured in the device.
a. Connect the device to the local network and start the RMS configuration software.
b. Search for the device under Device > Search > Network Device. The software finds all RMS devices in the local network.
c. Enter the host (server address) and the URL of the software services under Settings.
d. Finish configuration with Write. -
Log into the RMS software/cloud.
Select Tools > Setup > Devices > New > LAN device. -
Enter the serial number of the device.
-
Wait until the device is flashing orange. Press the button on the device briefly, as shown in the picture on the RMS software. The LED flashes green, when the connection is successful.
-
Enter the device name, channel, and group.
-
Finish configuration.
LED INDICATORS
Status | LED Function | Meaning |
---|---|---|
Connected | Flashes green | Status OK |
Flashes red | 2 times: no connection to the server | |
Not connected | Flashes orange | Device in pairing mode, push the button for |
integration into the software
ACCESSORIES
AC1321 Mounting kit with Allen key and mounting cone
TECHNICAL DATA
Power supply: 24 VDC ±10 % / <100 mA
Power supply requirements: 24 VDC ±10 % / >4 W / limited power source
Range of measurement/application: -40…70 °C
IP protection: IP65
Software: RMS Monitoring Software
Weight: 200 g
DIMENSIONS
DELIVERY PACKAGE
- Gateway
- Wall bracket
- Short instruction manual
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.