IBEX R1300GS Side Stand Foot Kit Instruction Manual
- June 16, 2024
- IBEX
Table of Contents
IBEX R1300GS Side Stand Foot Kit
Product Information
Specifications
- RAL Farbton : schwarz
- Color : 10010479
- Mounting Instruction Rev.: ./.
- Date : 08.12.2023
Product Usage Instructions
General Notes
Observe any country-specific regulations by the legislature or homologation
regulations.
Preparation
Before starting the assembly, make sure you have read and understood all the
instructions provided in the assembly manual.
Assembling
- According to the vehicle manufacturer’s specifications, all demounted parts and connections must be reassembled or replaced by the parts and connections supplied by our company.
- Secure all threads with a medium-strong liquid screw protection, unless stated otherwise.
- Tighten all bolts and nuts according to A4/ISO, unless stated otherwise by the vehicle manufacturer or our company.
- After assembly, ensure that all previously demounted parts and connections have been properly remounted.
Function Check
- After assembly, check the absolute freedom of movement and proper function of all vehicle parts.
- Ensure that cables, trains, and hoses are not scrubbing or clamped.
- Perform a comprehensive functional check before starting your journey.
- After driving 100 km, check the proper tightness of all parts and connections demounted during assembly.
Mounting Instruction
Legend
- left side
- right side
- position number and torque
- use screw lock
- packed by
- packaging date
Side stand foot kit
Attention
- Cornering and ground clearance can be reduced by using this product!
- For your own safty we recommend having installation and/ or servicing carried out by a specialist workshop. We assumes no liability for damage caused by improper installation and/ or maintenance work.
- No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer´s specifications.
Capacity And Weight
Instructions
Thank you for choosing this quality product from IBEX!
The assembly and/or maintenance of this product requires a good technical understanding. For your own safety, we recommend that the assembly and/or maintenance is carried out by a specialist workshop. Our company assumes no liability for any damage caused by improper assembly or maintenance. Be sure to keep in mind all the notes provided in the assembly instructions. Please also note all the instructions relevant to the assembly in the vehicle manual. Non-observance can cause damage to the vehicle or danger to the driver! Please keep the assembly instructions as a reference.
General Notes:
Observe any country-specific regulations by the legislature or homologation
regulations.
Preparation:
Read the assembly instructions carefully and make sure all parts of the list
are available. Make sure that your vehicle stands safely and can´t fall over.
Turn off the engine and pull the ignition key. If necessary, allow the
engine/exhaust to cool down. When working on the electrics disconnect the
vehicle battery. Be sure to use only suitable tools. If necessary get help
with the assembly work by a second person.
Assembling:
According to vehicle manufacturers specification all demounted parts and
connections must be reassembled or replaced by the parts and connections
supplied by our company. If not stated different secure all threads with a
medium-strong liquid screw protection. If not stated different by the vehicle
manufacturer or our company, all bolts and nuts must be tightened according to
A4/ISO. After assembly, make sure that all previously demounted parts and
connections have been properly remounted.
Funktion Check:
After assembly, pay attention to the absolute freedom of movement and proper
function of all vehicle parts. Cables, trains and hoses must not scrub or be
clamped. Do a comprehensive functional check before the start of your journey.
After 100 km please check the proper tightness of all parts and connections
demounted during assembly.
Copyright by:
IBEX GmbH Sosaer Straße 35 01257 Dresden. Errors and changes expected. Subject
to technical and design changes.
FAQ’s
Can I use this product without professional installation?
For your own safety, we recommend having installation and/or servicing carried out by a specialist workshop. Improper installation or maintenance can cause damage and we assume no liability for such damage.
What should I do if I encounter any issues during assembly?
If you encounter any issues during assembly, please refer to the assembly instructions and make sure you have followed all the provided notes. If the issue persists, please contact our customer support for further assistance.
How often should I perform a functional check after assembly?
After assembly, it is recommended to perform a comprehensive functional check before starting your journey. Additionally, after driving 100 km, check the proper tightness of all parts and connections demounted during assembly.