HUANUO Monitor Table Stand Instruction Manual
- June 7, 2024
- HUANUO
Table of Contents
Monitor Table Stand
Instruction Manual
Model: HNHM5
Thank you for choosing this HUANUO product! At HUANUO we strive to provide you
with the best quality products and services in the industry. Please share your
experience of our product with others at
www.huanuoav.com/reviews if you are
satisfied. Should you have any issues, please don’t hesitate to contact us.
Technical Support: 1-800-556-0533 Mon-
Fri 10am – 5pm (PST) (USA) (CAN)
Other Info: [email protected] (US/CA)
UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION
-
Carefully open the carton, remove contents and layout on cardboard or another protective surface to avoid
damage. -
Check package contents against the Supplied Parts and Hardware Lists to assure that all components were received undamaged. Do not use damaged or defective parts.
-
Not all parts and hardware included will be used. lf you require replacement parts, contact customer service at [email protected]
-
Carefully read all instructions before attempting installation.
-
If you do not understand the instructions or have any concerns or questions, please contact customer service at [email protected]
-
This product may contain moving parts. Use with caution.
-
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
Supplied Parts and Hardware
Bolt length: Verify adequate thread engagement with bolts or bolts/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the monitor.
-Too long will damage the monitor.
Warning: To avoid tipping, please be careful not to extend the monitor too far backward. When you adjust the angle of the monitor, please make sure the monitor is balanced to avoid instability of the center of gravity of the base.
Features
