HUANUO HNKB12B Keyboard Tray Under Desk Instruction Manual
- June 2, 2024
- HUANUO
Table of Contents
- Important Safety Information
- Clamping Range
- Weight Restrictions
- Tools Needed (Not Included)
- Step 1 Supplied Parts and Hardware
- Step 2 Supplied Parts and Hardware
- Step 3 Supplied Parts and Hardware
- INSTALLATION INSTRUCTIONS
- CUSTOMER SUPPORT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUANUO HNKB12B Keyboard Tray Under Desk
Important Safety Information
- Please carefully read all instructions before installation. If you have any questions or concerns, please call technical support or email customer service.
- Before starting assembly, verify that all parts are included and undamaged. Do not use damaged or defective parts.
- Do not use this product for any purpose that is not explicitly specified in this manual. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate us
Clamping Range
This product fits desktops 3/8″ -1 15/32″ (1 0mm-37 .5mm) thick.
Weight Restrictions
Max load is 11 lbs (5kg). Do not exceed the maximum weight capacity.
Tools Needed (Not Included)
Phillips Screwdriver
Step 1 Supplied Parts and Hardware
-
Right Tray
-
Left Tray
-
Connector
-
Bolt MS x 12mm
Step 2 Supplied Parts and Hardware
-
Keyboard Backstop
-
Bolt MS x 10mm
Step 3 Supplied Parts and Hardware
-
Left C-Clamp
-
Right C-Clamp
-
Bolt M4x8mm
-
Washer
INSTALLATION INSTRUCTIONS
NOTE: Loosely thread the bolts into the corresponding holes. Once all bolts are threaded, press the boards together to ensure no gap is between them , then fully tighten each bolt one by one.
**Step 1**
NOTE: Position the drawer slides toward the back for easier C-clamp
installation.
NOTE: Position the drawer slides toward the back for easier C-clamp installation.
CUSTOMER SUPPORT
1-800-556-0533 (US/CA) Mon-Fri, 8am-
8pm (CST)
44-808-196-3874 (UK) Mon-Fri, 2pm-10pm (UTC)
support@huanuo.com
www.huanuo.com