HUANUO HNCM16 Monitor Desk Mount Instruction Manual
- June 4, 2024
- HUANUO
Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Tool Need (Not Included)
- Supplied Parts and Hardware
- Supplied Parts and Hardware for Step 1
- Supplied Parts and Hardware for Step 2
- Supplied Parts and Hardware for Step 3
- Supplied Hardware for Step 4
- Supplied Hardware for Step 5
- Step 1 Install the Pole to the Desktop
- Step 2 Install Swivel Arm to the Pole
- Step 3 Attach the VESA Plate to the Laptop Tray or Monitor
- Step 4 Secure the Monitor or Laptop Tray onto the Head of Swivel Arm
- Step 5 Adjust the Tilt and Swivel Angle
- Step 6 Manage the Wires and Store the Allen Keys on Wire Clip
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUANUO HNCM16 Monitor Desk Mount
IMPORTANT SAFETY INSTRUCTIONS
-
Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, please contact our Technical Support line at
1-800-556-0533 or customer service at support@huanuoav.com. -
Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our Technical
Support line at 1-800-556-0533 or customer service at support@huanuoav.com. -
This product may contain moving parts. Use with caution.
-
Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
Check the VESA Pattern of Your Monitor before You Begin the Installation
If your Monitor VESA is greater than 1 00×1 00 mm/ 4×4 in or less than VESA
75xx75mm/3×3 in, this mount is NOT compatible
If this desk mount is NOT compatible, please contact customer service at
support@huanuoav.com to fmd a compatible
product.
Tool Need (Not Included)
Supplied Parts and Hardware
Warning: This product contains small items that could be a choking hazard
if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. If you require replacement parts, please
contact our Technical Support line at
1-800-556-0533 or customer service at
support@huanuoav.com.
- Please note: Not all hardware included in this package will be used.
Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware for Step 2
Supplied Parts and Hardware for Step 3
Supplied Hardware for Step 4
Supplied Hardware for Step 5
Step 1 Install the Pole to the Desktop
Step 2 Install Swivel Arm to the Pole
Step 3 Attach the VESA Plate to the Laptop Tray or Monitor
Step 4 Secure the Monitor or Laptop Tray onto the Head of Swivel Arm
| HEAVY! You may need assistance with this step.
---|---
Note: Please refer the procedures 4-1 and 4-2 to install the laptop tray
[t] with VESA plate [e] , onto the head of swivel arm
Step 5 Adjust the Tilt and Swivel Angle
Step 6 Manage the Wires and Store the Allen Keys on Wire Clip
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>