HUANUO Monitor Stand Instruction Manual
- June 7, 2024
- HUANUO
Table of Contents
- IMPORTANT SAFTY INSTRUCTIONS
- Check the VESA Pattern of Monitor Before the Installation
- Step 1 Secure the Support Pillar [04] to the Base [03]
- Step 2 Secure Cable Clip [05] and Monitor Connector [02] in Sequence
- Step 3 Select Monitor Bolts
- Step 4 Attach the Monitor Plate to the Monitor
- **Step 5 Hang Monitor to the Stand and Secure with Bolt [B]. B
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Monitor Stand
Instruction Manual
V1.0
Model: HNCM5
Website: www.huanuoav.com
Thank you for choosing this Huanuo product! At Huanuo we strive to provide you
with the best quality products and services in the industry. Please share your
experience of our product with others at
www.huanuoav.com/reviews if you are
satisfied. Should you have any issues, please don’t hesitate to contact us.
Technical Support:
1-800-556-0533 Mon-Fri 10am – 5pm (PST)
(USA) (CAN)
Other Info: support@huanuoav.com
(US/CA/DE/UK/FR/IT/ES/AU)
IMPORTANT SAFTY INSTRUCTIONS
Please carefully read all instructions before attempting installation. If you
do not understand the instructions or have any concerns or questions, please
contact our customer service at
support@huanuoav.com
CAUTION: Avoid potential personal injuries and property damage! Do not
use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
Check the VESA Pattern of Monitor Before the Installation
Minimum VESA pattern:75mm/3 in.(W)x75mm/3 in.(H)
If your TV VESA is greater than 100×100 mm/4×4 in. or less than VESA 75x75mm/3x3in., this mount is NOT compatible.
If this mount is NOT compatible, please contact customer service at support@huanuoav.com to find a compatible mount.
Tools Required [Not Included]
Supplied Parts and Hardware
Step 1 Secure the Support Pillar [04] to the Base [03]
Option A
Secure the support pillar [04] to the base [03] using bolts [A] and Allen key
[C] 
Option B
Secure the support pillar [04] with base [03] to desktop using grommet plate
[07] and knob [06] 
Note: If there isn’t a hole on your desk,
you can use a 0.47 in.-1.18 in.(12 mm-30mm) drill to drill a hole. The drill
is NOT included.
Step 2 Secure Cable Clip [05] and Monitor Connector [02] in Sequence
to the Support Pillar [04]
Step 2-1 Slide the cable clip [05] and monitor connector [02] in sequence
to the support pillar [04].
Step 2-2 Tighten monitor connector [02] to the support pillar [04] using
Allen key [D] 
Step 3 Select Monitor Bolts
Only one bolt size fits your monitor.
Bolt length:Verify adequate thread engagement with bolts or
bolts/spacers combination.We recommend thread engagement by at least 5 turns.
-Too short will not hold the monitor.
-Too long will damage the monitor.
Step 4 Attach the Monitor Plate to the Monitor
FLAT BACK MONITOR (UNIVERSAL MONITOR PLATE)
ROUND BACK MONITOR (UNIVERSAL MONITOR PLATE)
**Step 5 Hang Monitor to the Stand and Secure with Bolt [B]. B
Step 6 Fix Tilt Angle of the Monitor
Step 7 Manage Cables
Step 8 Store Allen Keys into the Cable Clip
**
Features
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>