BOULT AUDIO Zigbuds User Manual

BOULT AUDIO ZIGBUDS

USER MANUAL

For better sound quality experience, suggest use IOS 8.0/Android 4.3 or above operation system.

Please refer to the Safety Precautions mentioned on the last page of this manual before operating this device.

Power ON (First time user)
Step 1: Take the Earbuds out of the Charging Case;
Step 2: Please wait, both Earbuds will automatically pair to each other. They will blink for 3seconds & automatically connect to each other.
Wait for BLUE/RED LIGHTS on the right earbud.
This BLUE/RED LIGHTS means it has gone into Connection Mode.

Note: For pairing to the first time RED/BLUE Lights will only blink on the left earbud. For next time pairing procedure RED/BLUE LIGHTS will blink on either left or right earbud. This happens after the earbuds remembers the device.

Connection Mode
Step 3: Turn on Bluetooth on your device & then scan.
Step 4: Search for “Boult Audio ZigBuds” and pair accordingly.
Congratulations, your earbuds are connected successfully now.

Enter the password “0000” if asked for, and connect the earbuds to your device.

Step 5: You may now enjoy your music or any other entertainment form factor.

Operation Instructions

Large         Medium      Small

Note: If the earbuds don’t automatically Power On when taken out of the charging case, you can follow up the below step: Manually long press for 4 seconds in power off mode, blue power on indicator light will flash 2 times and that means the earbuds have powered on.

Single Earbud Use
Step 1: At this stage your earbuds are in stereo mode & connected to your Bluetooth device.
Step 2: Simply remove left or right earbud from your ear.
Step 3: Place this earbud back in to the charging case.
Step 4: Congratulations, you are now using mono/solo mode.

NOTE 1: There is no Master Earbud.
NOTE 2: To switch to stereo mode, simply take the earbud (L/R) out of the charging case & place in your ear. The earbud will automatically power on & pair with each other hence enabling for stereo usage.

Charge the Earbuds

• Put the earbud back into the charging case in the orientation (No need to identify L/R)
• Red light on the earbuds will indicate they are still being charged. This light will go off once the earbuds have been completely charged.
• When both two earbuds are fully charged, the carrying case will switch off to save power.

Charge the charging case

Warning: Please DON’T charge the charging case with “9V” or “12V” output, otherwise, it may cause damage to the case.

• To charge the case, plug in the USB cable and connect it into any USB port;
• The circle LED will flash blue when on charging, after it is completely charged blue light will go off.
• It will take 1.5hrs to completely charge.
• The earbuds can be charged a total 5 times if the case is at full battery.

Basic Functions

• Voice Assistant – Press the Multi-Function button for 2 seconds to activate voice assistant.
• Answer/Hang up phone call – Tap the Multi-Function button once to answer any incoming call and once again to hang up once done talking.
• Rejecting phone calls – double the Multi-Function button to reject any incoming call.
• Play/Pause – Tap the Multi-Function button to play/pause music at your convenience.
• Next track – When playing music in stereo mode, double click the right earbud Multi-Function button to play the next track.
• Previous – When playing music in stereo mode, double click the left earbud Multi-Function button to play the previous track.
• Volume up/ Volume down – The volume can’t be changed from the earbuds; it will have to be adjusted via the connected device.

Note: You can’t change tracks when in mono mode (Next/Previous track).

Voice Assistant
Step 1: Long press the Multi-function button on either left or right earbud for 2 seconds to activate Google/Siri Voice Assistant.
Step 2: Google/Siri voice screen will pop up & you may command at ease.
TIPS: You may try the following commands:
“What is the weather?”
“Play my playlist”
“Open camera”

Smart Power off
Your earbuds will automatically power off follow below steps:
Step 1: After use, remove the both earbuds from you ear;
Step 2: Place & put back both the earbuds into the charging case;
Step 3: If Red Led is showing, it means it is charging.

Manual Power Off
Step 1: If both earbuds are on, long press both left and right earbuds for 5 seconds to annually power off the earbuds.
Step 2: Place them back into the charging case to charge the earbuds.
Note: Single earbud use can function on both right/left earbuds.

Manual Pairing mode
Step 1: Take the Earbuds out of the Charging Case;
Step 2: When both Earbuds blue light will slowly flash, quickly press three times the Multi-function button, they will go into connection mode, and blink for 3 seconds & automatically connect to each other.

Common Problem with Solution

• If one side earbud working only: Then simply put back both earbuds in the case and take out again or perform “Factory Reset”;
• 0If earbuds not in scan mode: Then simply put back both earbuds in the case and take out again or perform Manual pairing mode;
• Earbuds need often clean the in-ear part, to avoid any dirty things blocking it and may cause the volume low.

Specifications:

Caution:

• In order to protect your hearing.Please adjust the volume to a moderate level to avoid listening to music at high volume for a long time.
• Please do not use the earphones when driving, or other situation which need high concentration.
• Please pull out the charging cable after full charged, to avoid a long-time charging.
• The input voltage and current of charger should be small than 5V/1A.
• The product warranty will be invalid If the output voltage and current of charger exceed the specified value and cause damage to the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>