BOULT AUDIO Probass Trufive Pro User Manual

PROBASS TRUFIVE PRO
USER MANUAL

Watch the VIDEO tutorial at
boultaudio.com/howto4
OR
Call us at +91 8595516267
& enter code 04 for a personalized training session or queries

Please refer to the safety precautions mentioned on the last page of this manual before operating this device.

Pairing for the rst time

Step 1: Make sure the product is fully charged.
Step 2: Open the case with earbuds inside and take both earbuds out
from the charging case. They will auto power-on and connect to each other. Blue LED light will start ashing on the right earbud and red & blue LED light will start ashing on the left earbud. Now, they are ready to connect with your device.
Step 3: Turn on the Bluetooth on your device & scan until you see Boult Audio Tru5ive Pro.
Step 4: Click on Boult Audio Tru5ive Pro to pair your device with the earbuds. Once your device is successfully paired with the earbuds, you can enjoy your music & calls.

Auto-pairing Mode (Re-pairing with your device)

Step 1: Turn on the Bluetooth on your same device.
Step 2: Open the case with earbuds inside and take both earbuds out
from the charging case. They will auto power-on and connect to each other. Blue LED light will start ashing on both the earbuds and they will connect to your same device automatically. Now, you can enjoy your music & calls.
Step 3: If the earbuds are not able to connect with the same device automatically, then charge the case with the earbuds inside and the lid closed. Open the case and take both earbuds out from the charging case. Open the Bluetooth settings on your device, scan, and connect to Boult Audio Tru5ive Pro. Now, you can enjoy your music & calls.

Product Introduction

Using as a Mono Headset

Step 1: Open the case with earbuds inside and take out one earbud which you want to use as a mono headset and close the case.
Step 2: Red & blue LED light will start ashing on the earbud and it will be ready to connect to your Bluetooth device. If not, close the case with both earbuds inside, charge the case and repeat all steps.
Step 3: If both earbuds need to be used as mono headsets with different devices, then first connect one earbud with your rst device and connect the second earbud with your second device. Please ensure that the rest connected earbud should be in the case with the lid closed or at least 10-15 meters away from the rest connected earbud or else, they will connect to each other.

Charging the case & earbuds

• Use only a 5V/1A USB charger to charge this product.
• This product or the Bluetooth function cannot/should not be used during charging.
• There are 4 LED lights on the charging case which indicates available battery.
• Each LED light re ects 25% available battery power.
• LED light will ash while charging the case and all four LED lights will be steady once charging is complete.
• The earbuds will charge while placed in the case with the lid closed.
• Earbuds will show a red LED light while charging and no light when the charging is complete.
• The charging case will get completely charged in up to 2 hours (650 Mah Li- Battery).
• Earbuds will get completely charged in up to 1.5 hours (60 Mah Li- Battery).

Functions

1. Switch On/O the earbuds
   Click on the multi-function button on your earbuds for 3 seconds to switch them on. Click on the multi-function button on your earbuds for 5 seconds to switch them o .

2. Voice assistance
   Click on the multi-function button on your earbuds for 2 seconds to activate the Google Assistant/Siri. Google Assistant/Siri will pop up on your phone screen.

3. Play/Pause music
   A single click on the multi-function button to play/pause the music.

4. Answer/End/Reject calls
   Single click on the multi-function button to answer, end or hang up the calls. Double click on the multi-function button to reject incoming calls.

5. Change music track
   Click on the multi-function button 2 times on your left earbud to change the track to the previous track. Click on the multi-function button 2 times on your right earbud to change the track to the next track.

6. Increase/Decrease volume
   Click on the multi-function button 3 times on your right earbud to decrease the volume. Click on the multi-function button 3 times on your left earbud to increase the volume.

Reset the product

If both earbuds fail to paired or connect with other paired or new devices, then follow the further step to reset them.
Method 1(if unable to pair together)
1. Switch-o both earbuds by pressing the multi-function button for 5 seconds.
2. Press & hold the multi-function button for 6 seconds on both the earbuds to make them enter into pairing mode. They will indicate with ashing red & blue LED light and will pair together. Now, they are ready to connect with your device.

Method 2 (Factory Reset)
1. Place both earbuds in the charging case and charge the case.
2. Open the case while charging, press & hold the multi-function button on both the earbuds for 15 seconds. Both earbuds will show purple LED light (red+blue) 2 times. Now, both earbuds are successfully reset to factory settings.

Method 3 (Reset Bluetooth setting on your device)
1. If your earbuds are still not connecting to your device, open Bluetooth settings on your device and delete Boult Audio Tru5ive Pro in the paired devices.
2. Now search for newly available devices and connect to Boult Audio Tru5ive Pro Now, you can enjoy your earbuds just like a brand new headset.

Safety Precautions

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the earbuds.

• Use only a 5V/1A USB charger to charge this product.
• Please keep the device away from extreme heat, humidity, or corrosive environment.
• Please don’t over-charge the earbuds or the case, as it will decrease the battery service life.
• Please use only a good-quality phone charger or USB charging port to charge the case.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>