BOULT AUDIO Probass X1-WL User Manual

BOULT AUDIO PROBASS X1-WL USER MANUAL

For better sound quality experience, suggest use IOS 8.0/ Android 4.3 or above operating system.

Please refer to the Safety Precautions mentioned on the last page of this manual before operating this device.

Pairing for the first time

Step 1: Make sure the product is fully charged.

Step 2: Press and hold the multi-function button for 5-6 seconds (approximately) to power-on the neckband. The neckband will indicate with red and blue flashing LED Light.
Now, the neckband is in paring mode & ready to connect with your device.

Step 3: Turn-on the bluetooth on your device & scan until you see Boult Audio Probass

Step 4: Click on Boult Audio Probass and pair your device with the neckband. Once paired, the neckband will indicate with blue flashing LED light.
Now, you can enjoy your music & calls.

Auto-pairing Mode (Re-pairing with your device)

Step 1: Turn-on the bluetooth on your device.

Step 2: Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the Neckband.

Step 3: The neckband will connect to your same device automatically. If not, connect to Boult Audio Probass in the bluetooth settings on your device.

Product Introduction

Charging the neckband

• Use only 5V/1A USB Charger to charge this product.
• This product or the bluetooth functions cannot/should not be used during charging.
• This neckband will indicate with quick flashing red LED light when the neckbands battery need to be charged.
• Solid red LED light will indicate on the neckband while charging.
• Solid blue LED light will indicate on the neckband once charging is complete.

Functions

• Voice assistance
  Click on the multi-function button for 2 seconds to activate the Google assistant/Siri.
  Google assistant/Siri will pop up on your phone screen.

• Play/Pause music
  Single click on the multi-function button to play/pause the music.

• Answer/End/Reject calls
  Single click on the multi-function button to answer/end a call.
  Press & hold the multi-function button for 2 seconds to reject the incoming call.

• Redialing the last call
  Double click on the multi-function button to redial the last phone number on your mobile phones dialing list.

• Change music track
  Press & hold the (-) volume button for one second to change the music track to the previous track.
  Press & hold the (+) volume button for one second to change the music track to the next track.

• Increase/Decrease volume
  Single click on the (-) volume button to decrease the volume.
  Single click on the (+) volume button to increase the volume.

• Switch ON/OFF
  Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the neckband.
  Flashing blue LED light will indicate on the neckband when powered-on.
  Press and hold the multi-function button for 3-4 seconds (approximately) to power-o the neckband.
  Red LED light will flash and the neckband will get switched-off.

Safety Precautions

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the neckband.

• Please keep this device away from extreme heat, humidity or corrosive environment.
• Please don’t over-charge the neckband as it will decrease the service life of battery.
• Please use only a good quality phone charger (5V/1A) or USB charging port to charge the neckband.
• This product or the bluetooth function should not be used during charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>