CREALITY CR-100 3D Printer User Guide
- June 7, 2024
- Creality
Table of Contents
CR-100 Guide Book
This guidebook is for standard CR-100.
Detailed instructions for users are available on the TF card.
Parameter
| Model | CR-100 |
|---|---|
| Molding Tech. | FDM |
| Printing Size | 10010080mm |
| Printing Speed | c.180mm/s, Normal 30-60MM/S |
| Precision | t0.1 mm |
| Layer Thickness | 0.1-0.4mm |
| Nozzle Diameter | 0.4mm |
| Nozzle Temp. | 2000 |
| Printing Mode | TF card One-button Print, offline printing, Remote |
printing
File Format| stl, obj, amf
Slice Software| Creality Slicer/Cura/Simplify3D
Power Supply| Input:100-240V AC 1.2A 50/60Hz
Output:DC 12V 5.0A
Total Power| 60W
Filament| (1)1.75mm PLA
Function Description
Start/Pause：
First Click ：Start to Printing after
heating to 200℃
Second Click：Stop printing
Third Click：Continue Printing
Home： Return to origin
Heat/Cool：
First Click：Heating to 200℃。
Second Click：Stop to heat, Cooling to room temperature
Load Filament
1. Pressing to heat，waiting the tempreature of nozzle to arrive 200℃.
2. Pressing the extrusion clamp, pass the filament through the extruder and
PTFE tube into the nozzle, untill the filament overflow
*After heating, Press the extrusion clamp, pull out the filament to remove.
Installation Holder
- Insert the holder into the mounting hole then turn it to the right to lock it.
- Put the filament on the holder.
Install Platform
Place the magnetic platform on the printing platform, and fix it
by clips.
One-button Print
- Insert the TF card into the TF slot of the printer
- Click to wait for the nozzle to heat up to 200 ° C
- Model will be printed after 2 minutes
- It only will print the first model in the TF card
Note
In case
of emergency, please turn off the power of the 3D printer directly.
Please use a 3D printer in a spacious, level, and well ventilated environment.
It is recommended that using printer in the temperature of 8℃-40℃ and a
humidity of 20% – 50%. outside this range may result in poor printing results.
Do not disassemble
the 3D printer without permission.
If you have any problems, please contact:
cs@creality3d.cn
Run “User Guide” in the TF card for more usage information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>