Kemper 58643 Mobile MaxiFil Extraction System Instructions
- June 1, 2024
- KEMPER
Table of Contents
Kemper 58643 Mobile MaxiFil Extraction System
Product Information
- Specifications
- Filter area: 42 m2
- Connection: 400 V
- Suction power with arm: 1000 m3/h
- Motor power: 1500 W
- Noise level: 72 dB(A)
- Connection diameter: 150 mm
- Dimensions: 1530x780x1230 mm
- Cable length: 4 m
- Weight: 125 kg
Product Usage Instructions
- Installation
- Choose a suitable location for the extraction system.
- Ensure proper ventilation around the unit.
- Connect the extraction system to a 400 V power source.
- Securely attach the extraction arm to the designated connection point.
- Operation
- Turn on the power generator supplying the unit.
- Adjust the suction power as needed using the control panel.
- Position the extraction arm close to the source of fumes or particles to be extracted.
- Monitor the filter area and clean or replace filters regularly for optimal performance.
- Maintenance
- Regularly check for any leaks or damage in the extraction system.
- Clean the exterior of the unit with a damp cloth to remove dust and debris.
- Inspect and clean the filter area according to the manufacturer’s guidelines.
FAQs
- Q: How often should I replace the filters?
- A: It is recommended to replace the filters every 3 to 6 months, depending on usage and environmental conditions.
- Q: Can this extraction system be used for woodworking applications?
- A: Yes, this extraction system is suitable for woodworking applications along with other listed technologies.
EXTRACTION SYSTEM
EXTRACTION SYSTEM, MOBILE, MAXIFIL
- Extraction arm Ø 150mm/4m in pipe version, extraction cap. with arm max. 1,000 m³/h ~ 1.5 kW ~ 3×400 V (type 65 850 108)
- Article Number: 58643
- EAN Code: 9004853586439
TECHNICAL FACTS
- Design for frequent use in commercial and industrial applications
- Also suitable for chrome-nickel-steel
- Safe operation due to rotary field detection
- Due to the special design of the hood, less adjustment of the extraction arm is necessary
- Increased safety through filter monitoring
- Increased safety through contamination-free filter change
- Very cost-efficient due to large capacity and long filter life
- 360° rotatable suction hood with throttle valve
- W3 / IFA certified
- Optional: Automatic start/stop, workplace lighting incl. ON/OFF on the extraction hood
- Silencer
- Control box
SPECIFICATIONS
Filter area| 42 m2
Connection| 400 V
suction power with arm| 1000 m3/h
motor power| 1500 W
Noise level (peak)| 72 dB(A)
---|---
suction tube-Ø| 150 mm
measurements without arm| 1530x780x1230 mm
arm length| 4 m
Weight| 125 kg
MORE INFO
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING STONE
- CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>