VEVOR Flat High Pressure Heat Press Machine User Manual

Flat High Pressure Heat Press Machine
User Manual Book

Brief introduction

The machine can thermo-transfer colorful pictures and words sublimation solvent printing inks on textiles which are made from cotton flax, chemical fiber, or nylon etc, and ceramics and glasses. And the machine also can conduct some heat-treatments such as hair-plating print and vesicant print, and conglutination of cloth lining and cloth under lower temperature and lower pressure such as the conglutination of kid’s clothes and cap, and shoes. Also, the machine can be used to smooth and shape in the production of small lots of caps, handkerchiefs and other commodities.

Detailed Product Description

Solid steel welded framework, scratch-resistant, Intelligent digital time & temp control panel with memory function, Automatic countdown and alarm, Good in heat transfer printing on t-shirt, bags, puzzles, mouse pads etc.

Product Characteristics

1. Fully digital temperature and time control, LCD displays show the temperature and time；
2. The processing time is electronically controlled, and the finalization of process steps is warned by light.
3. The working surface is covered by imported heat-resistant cloth, so it has a long working life and is easily cleaned.
4. The pressure can be adjust easily
5. Heat-resistant silica-gel sponge is placed on the motherboard, so the machine can print many kinds of products,
6. Heating pipeline is connected with heating plate, so the working surface can be heated evenly in shot period, so the machine is safe and durable.
7. Aluminum heat plate, heating uniformity on the surface.
8. Teflon coated on the heat plate, convenient and attractive appearance.
9. The silicon pad can endure maximum 350 degree without any distortion

Read before operating:

Be sure to operate with safe ground wire !!!
Check the voltage before using it . Turn off the machine and cut off the power supply.
When using the machine , please don’t heat the machine without operating it for long time .
When finish transfer press ,please turn off the machine .
When heating the machine , don’t touch the up heat plate in case of scald .
When you press the handle ,if you feel the pressure is too much and hard to press it , please adjust the using pressure by hand .Keep children away from the machine.

Setting Temperature & Time

1. “TEMP” temperature setting button;
2. Temperature UP Arrow Key & Down Arrow Key;
3. “TIME” time setting button

Operation (The temperature shows C degrees):
No.1: Turn power switch on, and press the power button, then the power indicator is lightened.
No.2: Setting temperature, press “TEMP” key, then, press the UP arrow key or down arrow key, set the right temperature. ( for T-shirt: 180 C degrees,)
When the temperature reaches the right range, the indicator on the top of temperature-adjuster is switch off. Then the following operations can be conducted.

No.3 Setting time, Press “TIME” key, then, press the UP arrow key or down arrow key, set the right time. ( For T-shirt: 15~20 sec.)
No. 4 Flatly place the cloth on the lower printing plate, then cover the printing paper (please note the working surface of the paper), push the handle down to specified point. Please note that the force should not more than 25 Kg at this time, or otherwise, the handle will be transformed.

a. Sublimation Heat Transfer: Temperature 170~190℃, Time: 15~20sec.
b. Film heat transfer: Temperature 110-150℃, Time: 8~15 sec.
c. Foam Heat Transfer: Temperature 120-160℃, Time: 8~15 sec.
d. Hot-fix rhinestone: Temperature 160-180℃, Time: 10~15 sec.

How to print a T shirt?
A. Take a digital photo Print it out on sublimation paper with sublimation ink in your printer (mirror image printing). Cut the picture size to be large as you want, then put it on your tee shirt and fix by adhesive tape.
B. Put a T-shirt in the machine. (put the printed sublimation paper on the t-shirt properly.)

1. Get ready on the power, press the power button , the indicator is lighted!
2. Adjust the temperature ( 170° C~ 180° C) and time ( about 15~20 seconds) . When the temperature reaches the right degree, the top temperature indicator will be extinct.
3. Put the heating flat down ( please note the right surface of the paper) . Please note that the pressure should be no too much, or too little!
4. When the temperature gets to the set time, the buzzer rings ( please turn off the button and raise.
   Your customized T shirt is done! Very Simple : )

THE QUESTION PROMPT FOR THE FAILURE PRINTING
A. the color is lighter: the temperature is too low, or the pressure is not even, or the time is too short.
B. The design is indistinct: the time is too long and lead to ink diffusing.
C. The design has no luster: the pressure is too high or temperature too high.
D. Part of design is indistinct: heat printing zone or the heating is not even.
E. Scar on design: heat printing time is too long.
F. Dept of color is not the same: pressure not even or the coating is not even.
G. Paper stick to the object: the temperature is too high, or the coating of the object is not good.

Print your own customized product you need:

1. One Ink jet printer/ six colors printer (For example: Epson R-230 / R270 / R290 / T50/L805)

2. One CISS (Continuous ink supply system)
   Different models of Ink jet Printer will need different CISS.

3. Sublimation ink;

4. High-temperature resistant tape;

5. Sublimation paper; or Heat transfer fabric paper

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>