motorola Verve Buds True Wireless Earbuds User Guide
- June 7, 2024
- Motorola
Table of Contents
MODEL: VERVEBUDS 500 Product ID: SH022
Frequency Band: 2.402 – 2.480 GHz Bluetooth ID: D036846
Maximum RF power: 6 dBm FCC ID: VLJ-SH022
Working temperature: -10°C – 45°C IC: 4522A-SH022
Quick Start Guide
(1) Pairing:
1. *Ensure both buds are inside the charging case with the lid closed. Take both buds out from the case.
2. Select “Vervebuds 500” from the smartphone Bluetooth menu
Value-added Feature
To use the buds independently (mono mode) please follow this pairing sequence.
3. Switch off the right bud by either holding MFB for 2 sec or by putting the right bud into the case with lid closed.
4. Put the left bud into pairing mode by holding it for 5 sec
5. Select “Vervebuds 500(L)”
Tips: When the Vervebuds are sitting on the case, it will automatically be switched on when charging case lid is open. It will automatically be switch OFF when the lid is closed.
Tips: Both right and left buds can be used as a mono!
(2) Fitting:
1. Insert the Vervebuds into your ear and rotate to fit comfortably
2. To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
(3) Basic Operation:
Additional Operation
Factory reset| Switch off both buds, then hold both MFB for 10 sec until it
shows PURPLE LED
Reject a call| Long Press MFB
Mute during call| Double Press MFB
Receive incoming call and end ongoing call| Double Press MFB
Receive incoming and on hold ongoing call| Single Press MFB
Voice command (Siri/Google/Alexa)| Double Press MFB
(only available in standby mode)
LED Indicator
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Off
Battery low| Red flash
(4) Charging:
Fully charge before use
The device can be powered through a micro USB from any CE compliant power
source that implement the European interface as requested by EN 301 489-52.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>