ELVITA E118423 Exterior Wall Light User Manual
- June 3, 2024
- ELVITA
Table of Contents
ELVITA E118423 Exterior Wall Light
Important Safety Instructions
Basic safety precautions should always be followed when installing, including the following:
- Read all instructions.
- Licensed electrician for installation only.
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- Do not exceed the nominal supply voltage or amperage ratings.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
Installation Procedure
WARNING
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only.
Turn Off power supply before starting any installation. Read instructions & check you have all the tools & accessories to complete the installation correctly.
Wall mounted installation
Step 1
Step 2
Step
3.1
Step
3.2
Step 4
Elvita products are distributed and marketed by Elon Group AB. Elon Group
AB Bäcklundavägen 1 | 702 03 Örebro Sweden
ELON GROUP | +46(0)10-220 40 00 | ELONGROUP.SE
Support and service: ELVITA.SE
© 2022, Elon Group AB. All rights reserved.
Documents / Resources
|
ELVITA E118423 Exterior Wall
Light
[pdf] User Manual
E118423 Exterior Wall Light, E118423, E118423 Light, Exterior Wall Light,
Exterior Light, Wall Light, Light
---|---