ATEN 4 Port HDMI Video Splicer User Manual

: June 7, 2024
: Aten

Table of Contents

FEATURES OF THE INTERFACE:
- Connection and operation:
- Matters needing attention:
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ATEN 4 Port HDMI Video Splicer User Manual

FEATURES OF THE INTERFACE:

Picture 1.0 front panel view

Front panel view

Picture 1.1 rear panel view

Rear panel view

Picture 1.2 IR panel showing and function introduction

Remote Control

Remote keys	Panel keys	Functional description
/	Power standby on/off button
OFF	Press Mode key	Turn off display mode. In this mode all output ports have

no signal output, but Optical, Coaxial and AUX can output sound.
1 x1| Split display mode. In this mode, all output ports output the same signal as the input.
2X2| Spliced display modes
1X2
1X3
1X4
2X1
3X1
4X1
< />| Switch mode. Switch the display modes in a forward or backward loop.
OSD| Press Mode key more than 3s seconds| Turn on or off the OSD show.

Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do not use the remote for long time.

Connection and operation:

Connection and operation

Matters needing attention:

Display mode description

Mode

Splicing diagram

---|---|---|---|---|---

OFF

| |

1X1

| |

2X2

|

1X2

| Display mode Icons |

1X3

| Display mode Icons |

1X4

| Display mode Icons

2X1

|

3X1

|

Display mode Icons

|

4X1

| Display mode Icons

Note: When the display mode is spliced, the output ports not listed in the figure will be bypass output

Function description of “Audio EDID mode switch”
By selecting different EDID modes, the audio EDID information of the display device can be changed to make the signal source output the corresponding audio format

Audio EDID mode

|

Description

|

Suitable situation

---|---|---
ADV| The audio output format is determined by the EDID information of the HDMI output1 connected equipment.

You can get the best sound quality in this mode. But Optical and AUX ports may not have sound output because the format is not supported.

| Recommended HDMI output
2CH| All ports priority output the stereo audio in this mode.| Recommended AUX output
5.1CH| Priority output 5.1 channel bit stream in this mode. In this mode, AUX port may not have sound output because the format is not supported.| Recommended Optical output
3. About OSD show
This product supports OSD show, which is used to show the status when switching the display mode.
The content of OSD is usually displayed in the upper left corner of the OUT1 output screen. When there is a switch operation, OSD will be showed for about 15 seconds and then automatically hidden.
The contents of OSD include: output resolution, input channel and display mode.
You can choose to turn on/off the OSD show. Turning off the OSD show can help improve the speed of switching between display modes.

RS232 remote control
This product supports RS232 remote command control and returns the status. Connect the RS232 port of the splicer to the PC COM port by a RS232 uncrossed cable or USB to RS232 adapter. Then install serial port tools in the PC can use RS232 control.
**Parameter configuration of serial port on PC side.

Baud rate

| 115200
---|---
Parity bits|

NONE

Data bits

| 8
Stop bits|

1

Serial port command table:

N0.

| Send command|

Return

---|---|---
ASCII| HEX| Instruction| Successful|

Fail

e.g. !RCC# !RCE# !RC2#

| NONE

SPECIFICATIONS

Model No.	AA6103
Model name	4 Port HDMI Video Splicer
Input ports	HDMI x1, DC x1, RS232 x1
Output ports	HDMI x4, Optical x1, Coaxial x1, AUX x1
Input resolution format