1Mii B03 Pro Transmitter Receiver User Guide

1Mii B03 Pro Transmitter Receiver User Guide

B03 Pro

Global customer services:

North America :
E-mail: support@1mii.com (US)
support-ca@1mii.com (CA)

Asia :
E-mail: support-jp@1mii.com (JP)

Europe :
E-mail: support-uk@1mii.com (UK)
support-de@1mii.com (DE)
support-fr@1mii.com (FR)
support-es@1mii.com (ES)
support-it@1mii.com (IT)

www.1mii.com/

Product overview & Basic operation

Basic operation

Status indicators

As a Wireless Transmitter(TX mode)

Note : If B03 Pro fail to pair, hold button for 2s to enter pairing mode.

Pair with the second device

• Set second headphones/speaker to pairing mode.
• Set B03 Pro to pairing mode again, hold the button for 2s until the TX LED flashes Blue and Red.
• Wait until connected.

As a Wireless Receiver (RX mode)

Note: If B03 Pro fail to pair, hold button for 2s to enter pairing mode

Bypass mode (Non-Bluetooth)

Note:

1. Bypass mode = Direct cable connection.
2. Bypass can only work with the same type of input/output i.e. AUX input to AUX output or OPT input ot OPT output.

Quick User Guide for B03 Pro

As a Wireless Transmitter (TX Mode)

1. Connect audio source (TV, DVD etc.) to B03 Pro “From TV” port with the audio cables provided (optical or AUX/RCA).
2. Connect B03 Pro to power source (TV, PC USB socket or power adapter) with USB cable.
3. Slide Power switch to the “ON” position.
4. Slide Mode switch to the “TX” position.
5. Pair B03 Pro with your Bluetooth-enabled headsets/speakers

• B03 Pro pairing mode = TX LED flash blue / red alternately fast.
  – First time use: B03 Pro auto enter pairing mode (with clear memory).
  – Afterward: press button for 2 seconds to enter.

• Set your headsets/speakers to pairing mode refer to its user manual.

• Wait and connected.

As a Wireless Receiver (RX mode)

1. Connect your speaker to B03 Pro “To Speaker” port with the audio cable provided (optical or AUX/RCA).
2. Connect B03 Pro to power source with USB cable and adapter.
3. Slide Power switch to the “ON” position.
4. Slide Mode switch to the “RX” position.
5. Pair B03 Pro with your Bluetooth-enabled phone/pc/tablet.

• B03 Pro pairing mode = RX LED flash blue / red alternately fast.

– First time use: B03 Pro auto enter pairing mode (with clear memory).
– Afterward: press button for 2 seconds to enter.

• Active Bluetooth on your phone or other device to find “B03 Pro” to connect.
• Wait and connected.

Bypass mode (Non-Bluetooth mode)

1. Connect audio source (TV, DVD etc.) to B03 Pro “From TV” port with the audio cables provided (optical or AUX/ RCA).
2. Connect your speaker to B03 Pro “To Speaker” port with your own audio cable (optical or AUX/RCA).
3. Connect B03 Pro to power source with USB cable and adapter.
4. Slide Power switch to the “ON” position.
5. Slide Mode switch to the “Bypass” position.
6. Ready for use.

Important Notice:

1. Make sure your (TV) output is valid. AUX test with earphones.
2. Does NOT support Dolby / DTS under OPT.
3. Bypass can only work with AUX to AUX & OPT to OPT.

Trouble shooting

1.  I am having trouble pairing and connecting to my Bluetooth device. Please check the following:
   – Your wireless device supports the wireless profiles listed in the specifications.
   – B03 and your device are next to each other or within 3 feet / 1 meter.
   – Make sure both B03 and the wireless device are in pairing mode.

2. After connecting and pairing with my wireless device, I cannot hear any music from my sound system. In Optical mode, B03 support device with sampling rate under 48kHz.
   Note: Need to make sure TV audio format is set to PCM(Fig-1) and TV sound out as “External Speakers”(Fig-2)

FCC notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Any questions?

Contact:support@1mii.com

(Response Time: 1working day)

References

• 1Mii – Founded in 2018, 1Mii is a technology company that has been dedicated to the development and production of long-range series of audio products such as wireless high-quality audio transmitters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>